You have to save the new settings in the same memory slot. ?Also sounds like you need a new battery. ?You are not plugged into the wall wart, are you? ?The wall wart cannot provide enough oomph to transmit on high. Using a 12 volt adapter could be used as long as your power supply puts out over 3 amps.?
Jardy Dawson WA7JRD
Message sent by....Oh look!! Pretty lights!!
toggle quoted message
Show quoted text
On May 25, 2021, at 21:20, Jim Nordstrom <fbnoodleman@...> wrote:
?
I have noticed that my FT-60 will NOT store the power setting for a repeater frequency. I can manually set the Tx power setting to LOW, and it will keep that setting. If I turn off the power or change batteries, the FT-60 changes to High power. On High power, after pushing the PTT switch then, it will not transmit, like it is being over powered.and shuts down. Any suggestions? Jim KQ6VP
