I have had an FT-60 for many years and never
needed to do a reset, but, expect
them to be gone.? The rig after reset should be just like it came
from the factory
and they knew nothing about your preferences, operating habits or
saved frequencies.
Jerry
NV7T
On 5/24/2020 3:14 PM, Pat Hunt via
groups.io wrote:
Will I lose my saved frequencies if I do a factory reset?
On May 24, 2020, at 10:43, Chuck Moore
via groups.io <wd4hxg@...> wrote:
?
Here is a link to a manual for the radio.
Also if you get it into an unknown mode you can always
perform a factory reset?
which will put everything in a known sate that works.
Regards
Chuck WD4HXG
Thanks Chuck!
Much appreciated.
I bought this FT-60 used, and things came set a
little... odd.
On 5/24/2020 1:07 PM, Chuck
Moore via groups.io wrote:
Press the 'Fw' button
Then press the '0' button
You will now be in the set menu.?
Rotate the top right knob to display item number
'40'
Again press the 'Fw"
button but do it quickly
Now you can rotate to
top right knob to select: Auto - FM - AM
Select the mode you want
and then press the transmit button momentarily .
Voila you are in the new
mode.
Chuck WD4HXG
Hi.
Anyone know how to switch to AM when
punching in frequencies on the
aircraft band? I hoped the radio could be
smart enough to switch on the
fly, when you enter a frequency between
108-136, but mine stays in FM.
Thanks
Chris
