?

Hi Mark

I saw your message: "I HAVE the RT Systems (ADMS) software, but I haven’t seen that I can do “banks”."

I think the way you use the Banks feature in the RT System software is by placing a check mark in the column Bank 1 for all the frequencies you want to be "added" to Bank 1. Then if you want other frequencies to be "added" to Bank 2, then you will place the check mark for these frequencies in the column under Bank 2, and then you can "add" frequencies by placing check marks under the columns for all remaining banks.

This way you tell the RT System to tell the radio to "group" these frequencies into the banks you designated.

I hope this helps. If anyone has any corrections, please go right ahead.

73
Wassim
WN6WJN

Sent from a device that appears to "work"?