Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
FT-101e Meter issue
Timothy Brown WB2PAY
开云体育While?evaluating?an old rig for a friend, I
discovered the meter in a FT-101E is not
working.
I found using a millivolt source and series current
limiting resistor that the meter coil is open.
Substituting my Fluke on the 300mv range I was able to
get readings, although it is difficult to
correlate them to what they would be on an analog
meter.
?
I could not find? specs on what the micro amp
rating?for the meter.
?
Searching epay, I found rigs to be parted out but no
individual meter movement that has been scavenged
from a rig.
?
I would be interested in finding data about and ?a
source for the meter movement.
?
Thanks
?
Tim Brown, WB2PAY,
Licensed since 1962 |
Timothy Brown WB2PAY
开云体育?
Roger,
?
Yes, I agree I have to check the circuit before
replacing the meter and destroying a new meter.
I will search ebay again and see if I can find the item
you mention.
Thanks
? Tim Brown, WB2PAY,
? ? From: [email protected] [mailto:[email protected]] On Behalf Of Roger VE7LB Sent: Monday, July 19, 2021 12:00 PM To: [email protected] Subject: Re: [Yaesu-FT-101] FT-101e Meter issue When I search eBay for FT-101 meter I get about 10 results for S meters including one for $16 delivered. Item # 114863571802 . Before putting in a good meter suggest checking the IC current measurement section resistors first. 73 Roger VE7LB |
to navigate to use esc to dismiss