开云体育

This might help, from the Service Manual. ?

Hello folks, I'm trying to find out if the boards on my FT-101EE are proper enough to work happily together with the radio. I believe I have some that are okay, but possibly others that might not be

I've taken tube radios to the car wash, but a bit leery of doing that with the PCB arrangement in this case. Which is the only reason I didn't suggest that myself.

I took the meter, VFO and the power transformer out of the one I had to wash.? I used soapy water with pressure washer held a discrete distance from the workings.? The weather was hot then so

I'd like to suggest buying a high (120-150 lbs) pressure 12 V fuel pump and modifying a cheap air brush to make a pressure washer, fill a basin with 91% IPA and wash it down over the basin to collect

Hi everyone! I recently purchased a Yaesu FT-101E/Yaesu FL-2100/Yaesu YS 60 all for the grand total of $250.? The gentleman told me everything works well. I removed the cover and took lots of pics

Disregard folks... I found it. It goes to the PTT line on the MIC Jack (with the other Grey/White wire) Mike

Hello again group, While servicing the Phones jack on my FT-101EE, I noticed a loose wire in the same vicinity. I don't know if this wire has been loose or if it broke loose when removing the phone

Mike there are many different versions of FT-101. Look the schematics at: k3jls.net/FT-101 alignment manual.pdf 73 Emerson Em ter., 20 de jun. de 2023 às 23:12, mikemm58 <mmcauley@...>

Yep, have a nice SWR meter, thanks to our good friends at Heathkit.

Do you also need a watt meter and or combo SWR/reflected meter? Using just a line tuner is nearly impossible without an SWR bridge.

Hi group, Do any of you have suggestions for (or have for sale) a relatively inexpensive HF autotuner I can use with my FT-101EX? Don't need any bells and whistles, just something that might work

Ok thanks Emerson. Can you help with the location of C152?ThanksMike

Mike C103 - 0.047 uf C 148 - 10uf C 152 - 1000uf Emerson PP6EW Em ter., 20 de jun. de 2023 às 20:32, mikemm58 <mmcauley@...> escreveu:

Bruce, Thanks for the reply, but I don't think you got the gist of my question. I wasn't asking if it should be there. I was asking about the huge disparity between the values of what I actually see

They are both supposed to be there. One is s simple RF ground. The electrolytic cap is “grounded” through the lamp bulb. But it is wired with the positive lead grounded through the bulb. Look at

Hello group, I have an FT-101EE (1976 vintage I believe) I have noticed the capacitor in the C103 position is a 1000uf 25v, whereas the schematic calls for a .047uf to be there.? Schematic also

Look up Buddy.He is on YouTube and goes by The Radio Shop.He has a whole series on the 101 series.George NE2I? On Sat, Jun 10, 2023 at 12:29 PM, Richard kn7sfz<kn7sfz@...> wrote: Paul

Paul Harrold IS the Man.? He is on facebook.

Yes….Hundreds. Go to Youtube.? Search FT101? “The Radio Shop” channel is particularly good and has many restoration videos for all FT101’s There is tons of information out