开云体育

Hi Gordon, Some NOS ones available from DB tubes in Quebec city:

Thankyou Jacques.? 6883B is a far better price and not much re-wiring to do under the final box.? Now if I can find a source for the relay; several places the relays are listed but no stock.? I

I guess you guys know this, but I was told the 101 output tubes are the sweep tubes used in the old tube TVs. I suspect it was a smart move as Yaesu probably figured these tubes would be around for a

6883B ? Yes sir ! 73, Jacques, VE2JFE in Montreal De : [email protected] <[email protected]> De la part de Gordon via groups.io Envoyé : 13 mars 2025 09:10 ? :

Just a note to ask if anyone is using 12 volt versions of the 6146B tubes in the "ZD"??? The 8298As have served well but getting pretty weak. -- Gord. VE5UJ

Well done good luck ! ________________________________ Sent: Tuesday, March 11, 2025 6:27 PM To: [email protected] <[email protected]> Subject: Re: [Yaesu-FT-101] New to me

WOOT!!!!!!! Diodes have been replaced....what a chore that was. And the radio is receiving again and, more importantly, not popping capacitors! ROFL. However, it needs more work and I believe

My Pleasure, the Receiver he fixed for me is part of my Yaseu twins. FL-101 and FR-101 . All the bells and whistles , every filter , both VHF add ones ....Museum quality condition. I love them. Those

Dave, Lee had me check the diodes on the rectifier board (PB-1076B). Both D6&7 were cracked. They control the 13.5vdc circuit. So, replacements have been ordered. Hopefully this will fix the problem

You're welcome I hope it works out 73's ________________________________ Sent: Saturday, March 8, 2025 7:30 PM To: [email protected] <[email protected]> Subject: Re: [Yaesu-FT-101] New to

Dave, Thank you. I have reached out to Lee and await his reply. Regards, -- Butch - KA?WWT

https://www.amateurradiorepair.biz/ Amateur Radio Repair<https://www.amateurradiorepair.biz/> Amateur / Ham Radio Repair/Alignment For many of us, Ham or Amateur radio is a part of our everyday life.

I have run out of ideas at this point as to where the problem lies with the 101B. I'm at a point to where I need someone a whole lot smarter than I to resurrect this old lady. I have reached out to

Hello there. I recently inherited a manual and a full-size fold-out schematic of the FT-101E. I went to FedEx Office and had a 600dpi black and white scan made.? It's a little over 2Gig in size and

Check the bulb that is in the front panel plastic escutcheon as well, it illuminates little dial indicator triangle.? It could be shorted.? I found mine cracked. Ed KN6NZW

Wanted to let folks know that in addition to being a ham with an FT101B, I am an artist and a printer and own a 44 inch wide photo color printer. I also have software that can blow up images with no

I just added some additional schematics to the file section. I have the FT-101B schematic blown up to 54x18 and I got a copy laminated. Now I can mark all over it and wipe it away when I am done

The following items have been added to the Files area of the [email protected] group. * /03 - FT-101 Original Series Operators and Maintenance Manuals/FT-101B Files/FT-101B 54x18 scan.pdf (

Well, So close and now not so close. I was checking voltages on PB-1315A and heard a POP. 2 caps C11 and C12 blew. I replaced them and they blew again. Now I am in a fallback position as I can go no

Hi All, New to the group!? I picked up a FT-101 off of Ebay from a Japanese vendor and have a question about decoding the serial number. I know this has probably been hashed over many times but I am