开云体育

Yaesu HF Transceiver, 2 m Transceiver, Power Supply, Mic, and more For Sale: . Yaesu FT-840 HF Transceiver For Sale: The compact Yaesu FT-840 has two direct digital synthesizers and rotary encoder that provide silky-smooth tuning. The excellent general coverage receiver tunes .1-30 MHz in 10 Hz steps. The FT-840 uses a die-cast RF power amp with thermally switched fan to ensure up to 100 watts output. Other features include backlit 10 Hz LCD, IF shift, reverse CW, dual VFOs, 100 memories, attenuator, noise blanker, meter, scan modes and speech processor. 9.5 x 3.7 x 7 inches. Requires 13 VDC at 20 Amps. Features: 0.1-30 MHz Receive 100 Memories LCD Display IF Shift Noise Blanker Adjustable RF Power 100 Watts Output Attenuator Dual VFO's Squelch This particular unit works like it should. Cosmetically, it is exceptionally good. It has one scratch that you can see if the light is just right. With paper work for $425 . Yaesu FT-1802 M, 2 m Transceiver: The FT-1802 M features outstanding audio on both transmit and receive. It has strong receiver performance, covering 136 to 174 MHz, and boasts 221 memories. There is also a 10 channel NOAA weather bank. CTCSS and DCS Encoder and Decoder circuits. It even has a unique CW trainer to practice Morse Code, all in a rugged die cast chassis. The supplied MH-48A6J DTMF hand mic includes four programmable keys. Features: 221 Memories 8 Memory Banks 50/25/10/5 Watts Output APO - Automatic Power-Off ARS - Automatic Repeater Shift Busy Channel Lock-Out DTMF Memories CTCSS Encode/Decode CW Trainer Password Function Backlit DTMF Mic This particular unit works 100% and looks like new. In fact it is still in its original box, with all its "stuff". I was told it had been won at a hamfest, and never used. With mic, mobile bracket, power cord, other misc. and manual in original box for $125 . Rig Programming Software/hardware: These days the rigs have so many memories plus other features, that it is almost impossible to program them manually. This software takes care of this problem, by letting you use the computer to program. ADMS-1802 for Yaesu FT-1802 (see above) and maybe others The ADMS-1802 consists of a hardware cable, plus a software CD, plus instructions to program a Yaesu FT-1802, and possibly other rigs. This unit appears that it might be new. $25 . Yaesu FP-707, 20 Amp Power Supply: The Yaesu FP-707 power supply is designed to match the FT-707 transceiver, but will also match the FT-747 and 757 series transceivers, or any HF transceiver that uses a 4 pin Cinch- Jones connector. Although it has the 4 pin connector, it also has a set of binding posts on the back, so it can be used with any rig requiring up to 20 amps. This is a linear power supply, so no switching noise. It also has a built in speaker. This one works great. It looks really terrific, especially considering its age. With paper work for only $100. . Yaesu Hand Microphone: Yaesu MH-48 DTMF Hand Microphone For Yaesu FT-7800R/7900R/1807M/1802M/1900 Has 16 digit DTMF TouchTone pad, plus 4 extra programmable buttons, plus Up/Down and PTT. Also had backlight with switch. Modular connector. Real Yaesu and not Chinese clone. It works fine and appears to be unused. $40 . Original Yaesu Manuals For Sale: These are the manuals only. All are originals, and not copies. Most are in close to new condition. FNB-9,10,11,12 Battery packs, $2 FC-757AT Antenna Tuner, $10 FT-100 HF/VHF Transceiver, $18 FT-470 Dual Band HT, $10 FT-757 GX, HF Transceiver, $18 FT-720 R, 2 meter mobile, $8 FT-1802 M, 2 meter mobile, $12 FT-2700 Dual Band Xcvr, $12 FTH-2005 HT, $5 FTS-8 tone squelch unit, $3 FTS-12 tone squelch unit, $3 MH-1B A2B speaker microphone, $2 SP-101 P, Speaker / Phone patch, $5 VX-1 dual band HT, $10 These are original Yaesu operating manuals only, in very nice condition. Service Manuals: Maintenance Service Manual for Yaesu FT-208 R 2 meter HT. Looks new. $25 Technical Supplement for Yaesu FT-2700 Dual Band Mobile. Looks new. $20 . I also have many other accessories available such as many different types of microphones, HTs, VHF and UHF

Yaesu HF Transceiver, 2 m Transceiver, TenTec Desk Mic (also fits Yaesu), Filter, Power Supply and more For Sale: . Yaesu FT-840 HF Transceiver For Sale: The compact Yaesu FT-840 has two direct digital synthesizers and rotary encoder that provide silky-smooth tuning. The excellent general coverage receiver tunes .1-30 MHz in 10 Hz steps. The FT-840 uses a die-cast RF power amp with thermally switched fan to ensure up to 100 watts output. Other features include backlit 10 Hz LCD, IF shift, reverse CW, dual VFOs, 100 memories, attenuator, noise blanker, meter, scan modes and speech processor. 9.5 x 3.7 x 7 inches. Requires 13 VDC at 20 Amps. Features: 0.1-30 MHz Receive 100 Memories LCD Display IF Shift Noise Blanker Adjustable RF Power 100 Watts Output Attenuator Dual VFO's Squelch This particular unit works like it should. Cosmetically, it is exceptionally good. It has one scratch that you can see if the light is just right. With paper work for $425 . TenTec 708 A Desk Microphone: Note that this microphone also fits Yaesu and plugs into Yaesu rigs, and needs no modifications. The 708 A deluxe base microphone is an Omni- directional dynamic microphones designed for use as a communications station microphone for Amateur Radio and other transmitting applications. It has a round 8 pin connector and can be used without modification for many Yaesu Transceivers in addition to TenTec transceivers. The unit consists of a metal die-cast base with 3 position PTT switch, flexible metal goose neck, dynamic microphone element and ball-type element housing. It has tailored frequency response from 30 Hz to 12 kHz designed for excellent transmit audio in SSB, AM, and FM modes. This one one looks like new. No defects of any sort. Electrically, it works as it should. With paper work for only $90. . Yaesu FT-1802 M, 2 m Transceiver: The FT-1802 M features outstanding audio on both transmit and receive. It has strong receiver performance, covering 136 to 174 MHz, and boasts 221 memories. There is also a 10 channel NOAA weather bank. CTCSS and DCS Encoder and Decoder circuits. It even has a unique CW trainer to practice Morse Code, all in a rugged die cast chassis. The supplied MH-48A6J DTMF hand mic includes four programmable keys. Features: 221 Memories 8 Memory Banks 50/25/10/5 Watts Output APO - Automatic Power-Off ARS - Automatic Repeater Shift Busy Channel Lock-Out DTMF Memories CTCSS Encode/Decode CW Trainer Password Function Backlit DTMF Mic This particular unit works 100% and looks like new. In fact it is still in its original box, with all its "stuff". I was told it had been won at a hamfest, and never used. With mic, mobile bracket, power cord, other misc. and manual in original box for $125 . Rig Programming Software/hardware: These days the rigs have so many memories plus other features, that it is almost impossible to program them manually. This software takes care of this problem, by letting you use the computer to program. ADMS-1802 for Yaesu FT-1802 (see above) and maybe others The ADMS-1802 consists of a hardware cable, plus a software CD, plus instructions to program a Yaesu FT-1802, and possibly other rigs. This unit appears that it might be new. $25 . Collins Mechanical Filter for Yaesu: This Collins Mechanical filter also has Yaesu numbers and was designed to be used in Yaesu Transceivers. Please check you manual to see if it fits your rig. It is designed for the 455 KHz IF. If your Yaesu rig uses 455 KHz filters, it probably fits. It fits the FT-817, FT-818, FT-847, FT-857, FT-897, FT-2000 and probably others. Most of you may know that Collins no longer makes mechanical filters. This one works as it should, and looks like new. Yaesu XF-119 SN (YF-122 SN) Collins 526-8739-010 2300 Hz, designed for narrow SSB $135 . Yaesu FP-707, 20 Amp Power Supply: The Yaesu FP-707 power supply is designed to match the FT-707 transceiver, but will also match the FT-747 and 757 series transceivers, or any HF transceiver that uses a 4 pin Cinch- Jones connector. Although it has the 4 pin connector, it also has a set of binding posts on th

hi all just had a manual for the; FT101ZD sent me in PDF format but unfortunately the Files are not active on this site as this is a new sit it does not come with file space from reading the Groups site I believe that if you up grade the site for 1 month for $20 then downgrade it the site wil have 1 G of storage allocated to it in order to keep equipment working service information is a must so having the files active is a must to help all that want to repair the equipment glad to talk about it Regards Paul

Hello everyone. FYI on Veterans Day we will be operating NJ2BB from the Battleship New Jersey. We will probably be on 20 & 40 SSB depending on conditions between 0900 - 1400 EST. This is not a special event operation but a couple of us doing what we can to honor all Veterans while the ship's crew does their own ceremonies. de KC3AM

Yaesu 2 m Transceiver, TenTec Desk Mic (also fits Yaesu), Filter, Power Supply and more For Sale: . Yaesu FT-1802 M, 2 m Transceiver: The FT-1802 M features outstanding audio on both transmit and receive. It has strong receiver performance, covering 136 to 174 MHz, and boasts 221 memories. There is also a 10 channel NOAA weather bank. CTCSS and DCS Encoder and Decoder circuits. It even has a unique CW trainer to practice Morse Code, all in a rugged die cast chassis. The supplied MH-48A6J DTMF hand mic includes four programmable keys. Features: 221 Memories 8 Memory Banks 50/25/10/5 Watts Output APO - Automatic Power-Off ARS - Automatic Repeater Shift Busy Channel Lock-Out DTMF Memories CTCSS Encode/Decode CW Trainer Password Function Backlit DTMF Mic This particular unit works 100% and looks like new. In fact it is still in its original box, with all its "stuff". I was told it had been won at a hamfest, and never used. With mic, mobile bracket, power cord, other misc. and manual in original box for $125 . Rig Programming Software/hardware: These days the rigs have so many memories plus other features, that it is almost impossible to program them manually. This software takes care of this problem, by letting you use the computer to program. ADMS-1802 for Yaesu FT-1802 (see above) and maybe others The ADMS-1802 consists of a hardware cable, plus a software CD, plus instructions to program a Yaesu FT-1802, and possibly other rigs. This unit appears that it might be new. $25 ADMS-4B-USB The ADMS-4B-USB is designed to program Yaesu FT-857, FT-857 D, FT-897, FT-897 D, and maybe others. It includes a CD with software, plus a cable that plugs into USB on your computer, and the 8 pin connector on the radio. This one is in its original box. $30 . TenTec 708 A Desk Microphone: Note that this microphone also fits Yaesu and plugs into Yaesu rigs, and needs no modifications. The 708 A deluxe base microphone is an Omni- directional dynamic microphones designed for use as a communications station microphone for Amateur Radio and other transmitting applications. It has a round 8 pin connector and can be used without modification for many Yaesu Transceivers in addition to TenTec transceivers. The unit consists of a metal die-cast base with 3 position PTT switch, flexible metal goose neck, dynamic microphone element and ball-type element housing. It has tailored frequency response from 30 Hz to 12 kHz designed for excellent transmit audio in SSB, AM, and FM modes. This one one looks like new. No defects of any sort. Electrically, it works as it should. With paper work for only $90. . Collins Mechanical Filter for Yaesu: This Collins Mechanical filter also has Yaesu numbers and was designed to be used in Yaesu Transceivers. Please check you manual to see if it fits your rig. It is designed for the 455 KHz IF. If your Yaesu rig uses 455 KHz filters, it probably fits. It fits the FT-817, FT-818, FT-847, FT-857, FT-897, FT-2000 and probably others. Most of you may know that Collins no longer makes mechanical filters. This one works as it should, and looks like new. Yaesu XF-119 SN (YF-122 SN) Collins 526-8739-010 2300 Hz, designed for narrow SSB $135 . Yaesu FP-707, 20 Amp Power Supply: The Yaesu FP-707 power supply is designed to match the FT-707 transceiver, but will also match the FT-747 and 757 series transceivers, or any HF transceiver that uses a 4 pin Cinch- Jones connector. Although it has the 4 pin connector, it also has a set of binding posts on the back, so it can be used with any rig requiring up to 20 amps. This is a linear power supply, so no switching noise. It also has a built in speaker. This one works great. It looks really terrific, especially considering its age. With paper work for only $100. . Yaesu Hand Microphones: Yaesu MH-48 DTMF Hand Microphone For Yaesu FT-7800R/7900R/1807M/1802M/1900 Has 16 digit DTMF TouchTone pad, plus 4 extra programmable buttons, plus Up/Down and PTT. Also had backlight with switch. Modular connector. Real Yaesu and not Chinese clone. It works fine and appears to be unused. $40 Yaesu MH-67 A8J

Hi all the following is to generate a bit of traffic Although I am new to the group but I do not see any activity is this because we do not have any storage space to store associated literature to any of the articles ? or is it because most have there equipment and it does every think thy want so no help required Personal i fell in love with Yaesu at the age of 19 before that i could only admire the equipment my first encounter was the FT 220 being the first 2 mt all mode rig from then on I moved into a flat so aerials gave me a problem but more recently i was sad to have to by my next rig from Icom 9700 because Yaesu had not developed a multi mode rig for 2mt ,70 cm and 23 cm personal the 9700 has good points but icom have missed out a bit personal i think Yaesu could produce a winier as the market is crying out for a 4 band rig to do 2 mt to 13 cm as this will then cater for the growing satellite market but it will require video TX and RX ether included or from an associated computer the icing on the cake would be to include 4 mt as this would generate more activity on the band for the VHF operators Regards Paul

Was the “A12” indicator always flashing or is it just me? If it’s not supposed to be, what should I check? aprs.fi shows functioning. NFM mode selected.