Hello,
Wondered if someone has successfully disabled the annoying key beep and scan stop beep with this series transceiver.

Hi Donald,

Thanks, I will give those a try. I've also asked Yaesu directly. I'll post any solution I get...

--tks (KE6BJQ)

Sunday, April 21, 2024, 10:25:05 AM, you wrote:

--
Best regards,
Tim Slattery

Tim . . .


On Sat, 20 Apr 2024 20:49:00 -0700, "Tim Slattery" <tim_slattery@...> wrote:

I have restored all the important stuff, but one thing I had was the OFF display showed the battery voltage. Now it shows the clock. I can't find anywhere in the manual or my cheatsheets how to get back to the battery voltage display.

I do know how to get the secondary display to show battery voltage, and that is not what I'm looking for. I also know how to set it to have nothing display when off. Anybody know what I'm missing?

You might try posting in the Fox Tango and also the amateur-repairs groups also
to get more eyeballs on your post and issue. The other Yaesu group is much
larger, and so is the amateur-repairs group, though the latter is not specific
to Yaesu radios.



/g/Amateur-repairs

(I searched and can't find a group specific to your model.)

If you get an answer in one of the other groups, do please report back here so
we have a record of what you did to get the results you wanted, so someone else
can just do a search in our message archive and find the solution that worked.


Donald KX8K




----------------------------------------------------
Some ham radio groups you may be interested in:
/g/ICOM /g/Ham-Antennas
/g/HamRadioHelp /g/Baofeng
/g/CHIRP

I'm hoping there are some old-timers hanging around here. I have an FT-530 I've had since 1998. I use it a lot, and have not had a total memory failure in decades, until recently. While changing the memory backup battery, something went wrong and it went to "factory reset".

I have restored all the important stuff, but one thing I had was the OFF display showed the battery voltage. Now it shows the clock. I can't find anywhere in the manual or my cheatsheets how to get back to the battery voltage display.

I do know how to get the secondary display to show battery voltage, and that is not what I'm looking for. I also know how to set it to have nothing display when off. Anybody know what I'm missing?

KE6BJQ - Tim



--
Best regards,
Tim Slattery

Hi, all. Tonight I unfortunately put too many volts thru my FTM-200 and burned it up.? Anyone know if this is repairable? Maybe burned and internal fuse or diode?? Appears the FTM-500 has an internal fuse. Also looking for a schematic for this radio. Thanks for reading.

Erick
KE0SMR

HF Transceiver, HF + VHF + UHF Transceiver,
Power Supply, Manuals, and more For Sale:

.

Yaesu FT-1000 D Deluxe HF Transceiver:
-
The Yaesu FT-1000 was designed for optimum
performance and operability. The FT-1000
project involves a wholly new approach to
the application of the latest digital and
RF technologies to today's most demanding
HF bands.
-
Six microprocessors and five Direct Digital
Synthesizers. Receiver covers 100 kHz to 30 MHz.
-
Features:
Adjustable power up to 200 watts
Five Direct Digital Synthesizers
QRM Rejection Systems
100 Memories
Optimized Digital Communications Modes
Simultaneous Dual (Unlimited) Frequency Reception
Flexible Mode and IF Filter
Automatic Antenna Tuner with 39 memories
Special Features for CW Operation
-
This one appears to be the "D" model, with
the BPF-1, TCXO-1, and a crystal filter
instead of ceramic.
-
It works as it should, and looks extremely nice.
Pristine. Buy it in its original box, with
operating and service manuals on CD, for $1200.

.

Yaesu FT-847 HF+++ Transceiver:

The Yaesu FT-847 changes base operation
forever. Now you get three radios in one
-- HF, VHF/UHF and satellite. You get 100
watt output on HF and 6 Meters, plus 50
watts on both 2 Meters and 430 MHz bands.

Additional features include: Cross-band
Full Duplex operation, Normal/Reverse
Tracking, CTCSS/DCS Encode and Decode,
0.1 Hz tuning steps, DSP Notch, DSP NR
and DSP BPF, Shuttle Jog Tuning Dial,
Carry Handle and Keypad Entry.
The FT-847 is also 1200/9600 bps Packet
ready.

10.2 x 3.4 x 10.6 inches.

Features:
HF/VHF/UHF
DSP Filters
Dual Watch
0.1 Hz Tuning
CTCSS/DCS Decode and Encoode
Cross-band Full Duplex
1200/9600 Packet Ready

It covers all of the normal ham bands in one
package with virtually all modes!

This one works 100% and looks like new.
No defects.

With paper work for $850.

.

Yaesu FP-707, 20 Amp Speaker/Power Supply:

The Yaesu FP-707 is a 20 amp 13.8 Volt DC
Power Supply, with a very nice front facing
speaker in the same enclosure.

Cosmetically, it matches the FT-707, FT-747,
FT-757 and likely others.

Electrically, it can provide up to 20 amps,
so will work with most any HF and/or VHF rig.
It also has a set of binding posts on the back
for easy connection of a rig in addition
to the HF rig.

The speaker has a 3.5 mm plug on it.

This particular unit is in very good shape
both electrically and cosmetically. I can
not find a scratch, dent, or ding on it.
Electrically, it works as it should.

Buy this unit with manual for $125.

.

Yaesu NC-9 B Charger
13 V DC at 45 ma, 2.5 mm plug; $12

.

Original Yaesu Manuals:

These are the manuals only. All are originals, and not copies.
Most are in close to new condition.

FNB-9,10,11,12 Battery packs, $2
FC-757AT Antenna Tuner, $10
FT-100 HF/VHF Transceiver, $18
FT-470 Dual Band HT, $10
FT-757 GX, HF Transceiver, $18
FT-720 R, 2 meter mobile, $8
FT-1802 M, 2 meter mobile, $12
FT-2700 Dual Band Xcvr, $12
FTH-2005 HT, $5
FTS-8 tone squelch unit, $3
FTS-12 tone squelch unit, $3
MH-1B A2B speaker microphone, $2
SP-101 P, Speaker / Phone patch, $5
VX-1 dual band HT, $10

Maintenance Service Manual for Yaesu FT-208 R
2 meter HT. Looks new. $25

Technical Supplement for Yaesu FT-2700
Dual Band Mobile. Looks new. $20

These are original Yaesu operating manuals only,
in very nice condition.

.

I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.

.
Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK@... or W8EK@...
Voice Phone (352) 732-8400




.

Are you talking about an ATas 120 antenna? If so, a bad coax will cause what you speak of as will a bad Ground and from your discerption I would be checking the cable and the grounding.
73
?Ke4ska
Troy?

I have been using an Atlas screw type antenna for several years with my FT-857D mobile.? Recently the antenna has failed to tune and when I push the tune button I only get a beep.? I have tried two different mobile radios and atlas antennas.? The radios are set to Atlas HF & 50.? The voltage is showing 13.5 volts.

Any information will be appreciated.

HF + VHF + UHF Transceiver, 2 meter Transceiver,
Power Supply, Microphone, Manuals, and more For Sale:

.

Yaesu FT-847 HF+++ Transceiver:

The Yaesu FT-847 changes base operation
forever. Now you get three radios in one
-- HF, VHF/UHF and satellite. You get 100
watt output on HF and 6 Meters, plus 50
watts on both 2 Meters and 430 MHz bands.

Additional features include: Cross-band
Full Duplex operation, Normal/Reverse
Tracking, CTCSS/DCS Encode and Decode,
0.1 Hz tuning steps, DSP Notch, DSP NR
and DSP BPF, Shuttle Jog Tuning Dial,
Carry Handle and Keypad Entry.
The FT-847 is also 1200/9600 bps Packet
ready.

10.2 x 3.4 x 10.6 inches.

Features:
HF/VHF/UHF
DSP Filters
Dual Watch
0.1 Hz Tuning
CTCSS/DCS Decode and Encoode
Cross-band Full Duplex
1200/9600 Packet Ready

It covers all of the normal ham bands in one
package with virtually all modes!

This one works 100% and looks like new.
No defects.

With paper work for $850.

.

Yaesu FT-1900, 55 Watt 2 m transceiver:

The Yaesu FT-1900R provides toughness in a high
performance 55 watt 2-meter FM transceiver. The
receiver covers 136 to 174 MHz with illuminated
front panel keys and 200 memories. You get CTCSS
and DCS Encoder and Decoder circuits and keyboard
entry of frequencies directly from microphone.
5.6 x 1.6 x 5.8 inches.
The supplied MH-48A6J DTMF hand mic is backlit.
It comes with the MMB-36 mounting bracket and
DC cord. It requires 13.8 VDC at 11 Amps.

Features:
200 Memories (6 Character)
8 Memory Banks
55 Watts Output
Automatic Power-Off
Automatic Repeater Shift
DTMF Memories
CTCSS and DCS Encode/Decode
CW Trainer
Severe Weather Alert
Backlit DTMF Mic

This one works 100% and looks like new.
No scratches or defects.

Buy it with DTMF Mic, power cord, mobile bracket,
and paperwork for $100.

.

Yaesu FP-707, 20 Amp Speaker/Power Supply:

The Yaesu FP-707 is a 20 amp 13.8 Volt DC
Power Supply, with a very nice front facing
speaker in the same enclosure.

Cosmetically, it matches the FT-707, FT-747,
FT-757 and likely others.

Electrically, it can provide up to 20 amps,
so will work with most any HF and/or VHF rig.
It also has a set of binding posts on the back
for easy connection of a rig in addition
to the HF rig.

The speaker has a 3.5 mm plug on it.

This particular unit is in very good shape
both electrically and cosmetically. I can
not find a scratch, dent, or ding on it.
Electrically, it works as it should.

Buy this unit with manual for $125.

.


TenTec 708A Desk Microphone:

The 708 A desk mic is a standard desk mic. This
one has an 8 pin plug wired for TenTec on it.
This means it also fits Yaesu rigs with the
round 8 pin plug.

The 708 is a dynamic mic on a flexible goose
neck and is entirely metal, with no plastic
parts. It is similar to the TenTec 705 desk mic,
but MUCH more heavy duty.

This one works 100% and looks very close to
new, with one exception. The little peg used
for PTT has been broken. If you use VOX it
will be just perfect for you, as it works
great on VOX. Otherwise, you can activate
the PTT switch with tip of a pen or a small
screwdriver, or you could replace the switch.

.

Yaesu NC-9 B Charger
13 V DC at 45 ma, 2.5 mm plug; $12

.

Original Yaesu Manuals:

These are the manuals only. All are originals, and not copies.
Most are in close to new condition.

FNB-9,10,11,12 Battery packs, $2
FC-757AT Antenna Tuner, $10
FT-100 HF/VHF Transceiver, $18
FT-470 Dual Band HT, $10
FT-757 GX, HF Transceiver, $18
FT-720 R, 2 meter mobile, $8
FT-1802 M, 2 meter mobile, $12
FT-2700 Dual Band Xcvr, $12
FTH-2005 HT, $5
FTS-8 tone squelch unit, $3
FTS-12 tone squelch unit, $3
MH-1B A2B speaker microphone, $2
SP-101 P, Speaker / Phone patch, $5
VX-1 dual band HT, $10

Maintenance Service Manual for Yaesu FT-208 R
2 meter HT. Looks new. $25

Technical Supplement for Yaesu FT-2700
Dual Band Mobile. Looks new. $20

These are original Yaesu operating manuals only,
in very nice condition.

.

I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.

.
Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK@... or W8EK@...
Voice Phone (352) 732-8400




.

开云体育

HF + VHF + UHF Transceiver, 2 meter Transceiver,
Power Supply, Manuals, and more For Sale:

.

Yaesu FT-847 HF+++ Transceiver:

The Yaesu FT-847 changes base operation
forever. Now you get three radios in one
-- HF, VHF/UHF and satellite. You get 100
watt output on HF and 6 Meters, plus 50
watts on both 2 Meters and 430 MHz bands.

Additional features include: Cross-band
Full Duplex operation, Normal/Reverse
Tracking, CTCSS/DCS Encode and Decode,
0.1 Hz tuning steps, DSP Notch, DSP NR
and DSP BPF, Shuttle Jog Tuning Dial,
Carry Handle and Keypad Entry.
The FT-847 is also 1200/9600 bps Packet
ready.

10.2 x 3.4 x 10.6 inches.

Features:
HF/VHF/UHF
DSP Filters
Dual Watch
0.1 Hz Tuning
CTCSS/DCS Decode and Encoode
Cross-band Full Duplex
1200/9600 Packet Ready

It covers all of the normal ham bands in one
package with virtually all modes!

This one works 100% and looks like new.
No defects.

With paper work for $850.

.

Yaesu FT-1900, 55 Watt 2 m transceiver:

The Yaesu FT-1900R provides toughness in a high
performance 55 watt 2-meter FM transceiver. The
receiver covers 136 to 174 MHz with illuminated
front panel keys and 200 memories. You get CTCSS
and DCS Encoder and Decoder circuits and keyboard
entry of frequencies directly from microphone.
5.6 x 1.6 x 5.8 inches.
The supplied MH-48A6J DTMF hand mic is backlit.
It comes with the MMB-36 mounting bracket and
DC cord. It requires 13.8 VDC at 11 Amps.

Features:
200 Memories (6 Character)
8 Memory Banks
55 Watts Output
Automatic Power-Off
Automatic Repeater Shift
DTMF Memories
CTCSS and DCS Encode/Decode
CW Trainer
Severe Weather Alert
Backlit DTMF Mic

This one works 100% and looks like new.
No scratches or defects.

Buy it with DTMF Mic, power cord, mobile bracket,
and paperwork for $100.

.

Yaesu FP-707, 20 Amp Speaker/Power Supply:

The Yaesu FP-707 is a 20 amp 13.8 Volt DC
Power Supply, with a very nice front facing
speaker in the same enclosure.

Cosmetically, it matches the FT-707, FT-747,
FT-757 and likely others.

Electrically, it can provide up to 20 amps,
so will work with most any HF and/or VHF rig.
It also has a set of binding posts on the back
for easy connection of a rig in addition
to the HF rig.

The speaker has a 3.5 mm plug on it.

This particular unit is in very good shape
both electrically and cosmetically. I can
not find a scratch, dent, or ding on it.
Electrically, it works as it should.

Buy this unit with manual for $125.

.

TenTec 705 Desk Microphone:

The 705 desk mic is a standard desk mic. This
one has an 8 pin plug wired for TenTec on it.
This means it also fits Yaesu rigs with the
round 8 pin plug.

It has an electret mic element so it has great
frequency response.

This one works 100% and looks very close to
new, with no scratches or defects.
The foam wind screen is even in good shape.

With paper work for $75

.

TenTec 708A Desk Microphone:

The 708 A desk mic is a standard desk mic. This
one has an 8 pin plug wired for TenTec on it.
This means it also fits Yaesu rigs with the
round 8 pin plug.

The 708 is a dynamic mic on a flexible goose
neck and is entirely metal, with no plastic
parts. It is similar to the TenTec 705 desk mic,
but MUCH more heavy duty.

This one works 100% and looks very close to
new, with one exception. The little peg used
for PTT has been broken. If you use VOX it
will be just perfect for you, as it works
great on VOX. Otherwise, you can activate
the PTT switch with tip of a pen or a small
screwdriver, or you could replace the switch.

It has no scratches or defects.
The wind screen is in good shape,
and it is still in its original box.

Buy it with paper work for $79


Yaesu NC-9 B Charger
13 V DC at 45 ma, 2.5 mm plug; $12

.

Original Yaesu Manuals:

These are the manuals only. All are originals, and not copies.
Most are in close to new condition.

FNB-9,10,11,12 Battery packs, $2
FC-757AT Antenna Tuner, $10
FT-100 HF/VHF Transceiver, $18
FT-470 Dual Band HT, $10
FT-757 GX, HF Transceiver, $18
FT-720 R, 2 meter mobile, $8
FT-1802 M, 2 meter mobile, $12
FT-2700 Dual Band Xcvr, $12
FTH-2005 HT, $5
FTS-8 tone squelch unit, $3
FTS-12 tone squelch unit, $3
MH-1B A2B speaker microphone, $2
SP-101 P, Speaker / Phone patch, $5
VX-1 dual band HT, $10

Maintenance Service Manual for Yaesu FT-208 R
2 meter HT. Looks new. $25

Technical Supplement for Yaesu FT-2700
Dual Band Mobile. Looks new. $20

These are original Yaesu operating manuals only,
in very nice condition.

.

I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.

.
Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK@... or W8EK@...
Voice Phone (352) 732-8400




.

Heil has recommended settings for that radio on there website.

Have you contacted Heil for their recommendation? If you don't get a
recommendation from anyone here, I would ask them if you haven't already.


Donald KX8K



On Sat, 25 Nov 2023 09:12:35 -0800, "kc2wtg" <w2glh63@...> wrote:

I have FTdx3000 looking for recommendations microphone settings I have heil pr20 microphone any suggestions I would appreciate thank you have a good da

----------------------------------------------------
Some ham radio groups you may be interested in:
/g/ICOM /g/Ham-Antennas
/g/HamRadioHelp /g/Baofeng
/g/CHIRP

Hello to the group I have FTdx3000?looking for recommendations?microphone settings?I have heil pr20?microphone any suggestions I would appreciate thank you have a good day

开云体育

Hello Members -

Why do I see that Yaesu uses a paragraph style, individual step by step documentation style for their Adjustment / Calibration?
procedures? ( ie.? FT-767GX? and FT1000(d) , others? ) ?

Whereas, Kenwood and several other transceiver manufacturers use a Table or Spreadsheet style format for their units Adjustment / Calibration
procedures.
The Table format style appears much more appealing and easier to work with to self.

Has anyone here attempted to convert the Yaesu Calibration/Adjustment paragraph's to a Spreadsheet or Table format or know
of where to find a similar conversion ?
?

Turned out to be a Windows 11 issue. Changed to a Windows10 laptop and it worked like a champ. Everything else was the same.

Marc-k7wxk

开云体育

Make sure your data port is configured properly in the menu for rear and not mic.