did you try setting your audio to mono on your computer?
toggle quoted message
Show quoted text
On 7/4/2024 10:17 AM, duane hayes wrote: Ran the FTDX10 remotely also. Audio settings on PC were tricky, but
worked. While on my home network (ham shack is 100 yds from my house)
everything always worked, but over the internet, no waterfall. Same
with my FTDX101D. Don't remember only one side of audio playing.,
K0BBB
On Wed, Jul 3, 2024 at 10:35?AM Robert Meadows via groups.io
<w6mtm@...> wrote:
Thanks Don.
The problem I am having is running the Yaesu FTdx10 remotely. The problem is what I only have audio coming out of one speaker on my laptop, not both as it should be. I have tried headphones and USB speakers and they have the same problem. It is not a problem with my laptop or Windows 10, it is probably the software that runs the SCU-LAN10 unit and radio.
Best regards sir, Bob W6MTM
++++++
On Tuesday, July 2, 2024 at 04:40:37 PM EDT, Donald Hellen <donhellen@...> wrote:
On Tue, Jul 2, 2024 at 04:32 PM, Robert Meadows wrote:
Can I get help with FTdx10 issues on this page?
Certainly. We are a small group here with 136 members, but post your question or issue and we'll see if anyone here can help.
If we can't help you contact me off-list and I'll send you some other options for where to post your question/issue. Give it a few days first. Many people don't check their email daily. I don't always check my groups.io folders daily but I do check my inbox daily (I use folders in my email program to route posts to their own folder, one folder for each group or for a few related groups, to keep my regular email inbox less cluttered, so I can quickly see if I need to address any email.
Donald KX8K
|
Ran the FTDX10 remotely also. Audio settings on PC were tricky, but worked. While on my home network (ham shack is 100 yds from my house) everything always worked, but over the internet, no waterfall. Same with my FTDX101D. Don't remember only one side of audio playing., K0BBB On Wed, Jul 3, 2024 at 10:35?AM Robert Meadows via groups.io <w6mtm@...> wrote:
Thanks Don.
The problem I am having is running the Yaesu FTdx10 remotely. The problem is what I only have audio coming out of one speaker on my laptop, not both as it should be. I have tried headphones and USB speakers and they have the same problem. It is not a problem with my laptop or Windows 10, it is probably the software that runs the SCU-LAN10 unit and radio.
Best regards sir, Bob W6MTM
++++++
On Tuesday, July 2, 2024 at 04:40:37 PM EDT, Donald Hellen <donhellen@...> wrote:
On Tue, Jul 2, 2024 at 04:32 PM, Robert Meadows wrote:
Can I get help with FTdx10 issues on this page?
Certainly. We are a small group here with 136 members, but post your question or issue and we'll see if anyone here can help.
If we can't help you contact me off-list and I'll send you some other options for where to post your question/issue. Give it a few days first. Many people don't check their email daily. I don't always check my groups.io folders daily but I do check my inbox daily (I use folders in my email program to route posts to their own folder, one folder for each group or for a few related groups, to keep my regular email inbox less cluttered, so I can quickly see if I need to address any email.
Donald KX8K
|
Thanks Don.? The problem I am having is running the Yaesu FTdx10 remotely. The problem is what I only have audio coming out of one speaker on my laptop, not both as it should be. I have tried headphones and USB speakers and they have the same problem. It is not a problem with my laptop or Windows 10, it is probably the software that runs the SCU-LAN10 unit and radio.?
Best regards sir,? Bob? W6MTM ++++++
On Tue, Jul 2, 2024 at 04:32 PM, Robert Meadows wrote:
Can I get help with FTdx10 issues on this page??
Certainly. We are a small group here with 136 members, but post your question or issue and we'll see if anyone here can help.? If we can't help you contact me off-list and I'll send you some other options for where to post your question/issue. Give it a few days first. Many people don't check their email daily. I don't always check my groups.io folders daily but I do check my inbox daily (I use folders in my email program to route posts to their own folder, one folder for each group or for a few related groups, to keep my regular email inbox less cluttered, so I can quickly see if I need to address any email.? Donald KX8K
|
Well Duane I don't think you will be able to help me with the issue I have. The problem I am having is running the Yaesu FTdx10 remotely. The problem is what I only have audio coming out of one speaker on my laptop, not both as it should be. I have tried headphones and USB speakers and they have the same problem. It is not a problem with my laptop or Windows 10, it is probably the software that runs the SCU-LAN10 unit and radio.? Thanks, Bob? W6MTM +++++++++
used to own one.? What is the help needed ?
On Tue, Jul 2, 2024 at 3:32?PM Robert Meadows via groups.io
<w6mtm@...> wrote:
>
> Can I get help with FTdx10 issues on this page?? Thanks, Bob? W6MTM
>
|
Re: FTDX10 Tuning and Transmitting somehow blocked after changing band
On Tue, Jul 2, 2024 at 05:19 PM, <dc0la@...> wrote:
Is there a way to delete stored tuner data only?
I found this thread in another group: /g/ftdx-10/topic/auto_tune_memory_clear/101993594
It appears that you can't clear memories manually, but if you force a re-rune every 10 KHz or so across a band, it will write the new settings it will over-write the old settings.? Donald KX8K
|
Re: FTDX10 Tuning and Transmitting somehow blocked after changing band
switch to a different antenna entirely and tune that and then
switch back and tune again.
toggle quoted message
Show quoted text
Dear OMs,
I work my DX10 with an EFHW on 40/20/15/10m and a 1:64 Balun.
Tuning was working fine for a while and I had rapports 55 to 59
within Europe. I never saw the "High SWR" warning in the display,
worked SSB only and did either have SWR or Power displayed in the
meter. I also checked operation with a chain of power attenuators.
SWR 1.1 or less here without tuning.
After Power up I can tune on the band where it is with the normal
long relais klicking and also transmit with full power. When I
switch the band eg. 7MHz to 14MHz and press the tune button long
there is only a short relay click and tuning ends. No error
message, it's just back in rx. With a short press I can switch
tuning on/off.
Now in this case there is no TX power output. When I try to send
the TX light is on, power setting is at 100W but the power meter
is fixed at zero.
After a complete system power cycle I can transmit again with full
power. The Device is ~3 Month old, nothing gets hot, all is clean.
AS said above I get the same with antenna and attenuator at the
output.
Anybody an idea?
Is there a way to delete stored tuner data only?
I received the info to try a factory reset, but this would also
kill my audio settings I did several weeks ago.
73 DC0LA
|
FTDX10 Tuning and Transmitting somehow blocked after changing band
Dear OMs,
I work my DX10 with an EFHW on 40/20/15/10m and a 1:64 Balun. Tuning was working fine for a while and I had rapports 55 to 59 within Europe. I never saw the "High SWR" warning in the display, worked SSB only and did either have SWR or Power displayed in the meter. I also checked operation with a chain of power attenuators. SWR 1.1 or less here without tuning.
After Power up I can tune on the band where it is with the normal long relais klicking and also transmit with full power. When I switch the band eg. 7MHz to 14MHz and press the tune button long there is only a short relay click and tuning ends. No error message, it's just back in rx. With a short press I can switch tuning on/off.
Now in this case there is no TX power output. When I try to send the TX light is on, power setting is at 100W but the power meter is fixed at zero.
After a complete system power cycle I can transmit again with full power. The Device is ~3 Month old, nothing gets hot, all is clean. AS said above I get the same with antenna and attenuator at the output.
Anybody an idea?
Is there a way to delete stored tuner data only?
I received the info to try a factory reset, but this would also kill my audio settings I did several weeks ago.
73 DC0LA
|
If you don't have one now, just sit quietly and wish you had kept it.
toggle quoted message
Show quoted text
On 7/2/2024 4:33 PM, duane hayes wrote: used to own one. What is the help needed ?
On Tue, Jul 2, 2024 at 3:32?PM Robert Meadows via groups.io
<w6mtm@...> wrote:
Can I get help with FTdx10 issues on this page? Thanks, Bob W6MTM
|
On Tue, Jul 2, 2024 at 04:32 PM, Robert Meadows wrote:
Can I get help with FTdx10 issues on this page??
Certainly. We are a small group here with 136 members, but post your question or issue and we'll see if anyone here can help.? If we can't help you contact me off-list and I'll send you some other options for where to post your question/issue. Give it a few days first. Many people don't check their email daily. I don't always check my groups.io folders daily but I do check my inbox daily (I use folders in my email program to route posts to their own folder, one folder for each group or for a few related groups, to keep my regular email inbox less cluttered, so I can quickly see if I need to address any email.? Donald KX8K
|
used to own one. What is the help needed ? On Tue, Jul 2, 2024 at 3:32?PM Robert Meadows via groups.io <w6mtm@...> wrote:
Can I get help with FTdx10 issues on this page? Thanks, Bob W6MTM
|
Can I get help with FTdx10 issues on this page?? Thanks, Bob? W6MTM
|
hi, there is standard a 500hz cw filter in the second if, 8,83mhz
most it be activated or can be deactivated per? menu,
or is it all the time present in cw mode,
i have the radio only since few days
carlos on6cn
|
The microphone cable on my FT-8800 has given up the ghost, and no longer works properly. The insulation has worn out, exposing bare copper. Does anyone have experience replacing the cable only (YAESU T9206534 (it's half the price of the entire microphone assembly)??
Thank you - 73!
Karl Kaucher
KK4KRK
|
Transceiver, PS, Manuals and more FS
HF + VHF + UHF Transceiver,
Power Supply, Manuals, and more For Sale:
.
Yaesu FT-847 HF+++ Transceiver:
The Yaesu FT-847 changes base operation
forever. Now you get three radios in one
-- HF, VHF/UHF and satellite. You get 100
watt output on HF and 6 Meters, plus 50
watts on both 2 Meters and 430 MHz bands.
Additional features include: Cross-band
Full Duplex operation, Normal/Reverse
Tracking, CTCSS/DCS Encode and Decode,
0.1 Hz tuning steps, DSP Notch, DSP NR
and DSP BPF, Shuttle Jog Tuning Dial,
Carry Handle and Keypad Entry.
The FT-847 is also 1200/9600 bps Packet
ready.
10.2 x 3.4 x 10.6 inches.
Features:
HF/VHF/UHF
DSP Filters
Dual Watch
0.1 Hz Tuning
CTCSS/DCS Decode and Encoode
Cross-band Full Duplex
1200/9600 Packet Ready
It covers all of the normal ham bands in one
package with virtually all modes!
This one works 100% and looks like new.
No defects.
With paper work for $850.
.
Yaesu FP-707, 20 Amp Speaker/Power Supply:
The Yaesu FP-707 is a 20 amp 13.8 Volt DC
Power Supply, with a very nice front facing
speaker in the same enclosure.
Cosmetically, it matches the FT-707, FT-747,
FT-757 and likely others.
Electrically, it can provide up to 20 amps,
so will work with most any HF and/or VHF rig.
It also has a set of binding posts on the back
for easy connection of a rig in addition
to the HF rig.
The speaker has a 3.5 mm plug on it.
This particular unit is in very good shape
both electrically and cosmetically. I can
not find a scratch, dent, or ding on it.
Electrically, it works as it should.
Buy this unit with manual for $125.
.
Yaesu NC-9 B Charger
13 V DC at 45 ma, 2.5 mm plug; $12
.
Original Yaesu Manuals:
These are the manuals only. All are originals, and not copies.
Most are in close to new condition.
FNB-9,10,11,12 Battery packs, $2
FC-757AT Antenna Tuner, $10
FT-100 HF/VHF Transceiver, $18
FT-470 Dual Band HT, $10
FT-757 GX, HF Transceiver, $18
FT-720 R, 2 meter mobile, $8
FT-1802 M, 2 meter mobile, $12
FT-2700 Dual Band Xcvr, $12
FTH-2005 HT, $5
FTS-8 tone squelch unit, $3
FTS-12 tone squelch unit, $3
MH-1B A2B speaker microphone, $2
SP-101 P, Speaker / Phone patch, $5
VX-1 dual band HT, $10
Maintenance Service Manual for Yaesu FT-208 R
2 meter HT. Looks new. $25
Technical Supplement for Yaesu FT-2700
Dual Band Mobile. Looks new. $20
These are original Yaesu operating manuals only,
in very nice condition.
.
I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.
.
Prices do not include shipping from Florida.
Thanks.
73,
Ken, W8EK
Ken Simpson
E-mail to W8EK@... or W8EK@...
Voice Phone (352) 732-8400
.
|
Yaesu FT-290R2 power on/off issue
When switching the unit on/off the S/RF meter momentarily deflects and TX RX momentarily light up.
Is this normal??
|
Re: FT-290R2 - Key Beep Disable
Thanks Gary, was looking for a CPU data line rather than turning down the CW sidetone aswell with that trimpot method.?
|
Re: FT-290R2 - Key Beep Disable
I gathered the information from page 7 of the user manual-
Gary
On 4/22/2024 5:39 PM, Glen wrote:
toggle quoted message
Show quoted text
Thanks Gary but there is no 'dual function" associated with this
transceiver, you must be thinking of a different transceiver.?
|
Re: FT-290R2 - Key Beep Disable
Look at page 30 of your manual. Section 4.5 keypad beep volume
On 4/22/2024 6:39 PM, Glen wrote:
toggle quoted message
Show quoted text
Thanks Gary but there is no 'dual function" associated with this
transceiver, you must be thinking of a different transceiver.?
|
Re: FT-290R2 - Key Beep Disable
Thanks Gary but there is no 'dual function" associated with this transceiver, you must be thinking of a different transceiver.?
|
Re: FT-290R2 - Key Beep Disable
When a dual function option is disabled, it stops beeping when
used, to indicate that it has been turned off. Hearing a beep
indicates the function is enabled. If beeping was to be turned off
(some how), radio would not be able to indicate whether a function
is operable, or not.
Gary
On 4/22/2024 4:30 AM, Glen wrote:
toggle quoted message
Show quoted text
Hello,
Wondered if someone has successfully disabled the annoying key
beep and scan stop beep with this series transceiver.
|
Robert Meadows
Karl Kaucher