Hi Donald.
Thank you for your reply and idea.
I will do that.
Best regards.
Joao CT2HZF
?s 21:57 de 14/01/2023, Donald Hellen escreveu:
toggle quoted message
Show quoted text
Joao . . .
On Sat, 14 Jan 2023 08:58:22 -0800, "Joao Ribeiro" <ct2hzf@...> wrote:
Anyone has the service manual that might share with me? You might also post this in the amateur-repairs and the Fox Tango groups to have
more eyes on your request. We're a pretty small group here.
Donald KX8K
----------------------------------------------------
Some ham radio groups you may be interested in:
/g/ICOM /g/Ham-Antennas
/g/HamRadioHelp /g/Baofeng
/g/CHIRP
|
Joao . . . On Sat, 14 Jan 2023 08:58:22 -0800, "Joao Ribeiro" <ct2hzf@...> wrote: Anyone has the service manual that might share with me? You might also post this in the amateur-repairs and the Fox Tango groups to have more eyes on your request. We're a pretty small group here. Donald KX8K ---------------------------------------------------- Some ham radio groups you may be interested in: /g/ICOM /g/Ham-Antennas/g/HamRadioHelp /g/Baofeng/g/CHIRP
|
Dear All.
I have bought one Yaesu FT707 with external FV707DM, but unfortunately the external VFO has a problem.
The thing is, as soon as i press RX buttom, the frequency readout on FT707, jumps to the end of selected band, i mean, if its on 40 Mts, the frequency change to 7,497, on 20, jumps to 14,500, same happens on each selected band.
I kindly ask for help to try to solve the issue.
I have checked all reference frequencies and all are ok. ( 30; 90;60;Mhz; 10Khz)
?Anyone has the service manual that might share with me?
Many thanks in advance and best regards
Joao CT2HZF
|
Quad bander, PS, Filters, Manuals FS
Quad Band Transceiver, Power Supply,
Crystal filters, Manuals, and
more For Sale:
.
Yaesu FT-8900 Quad Bander:
The Yaesu FT-8900R quad bander gives you power
and flexibility on the road. Operate 10 meters,
6 meters, 2 meters and 70 centimeters. High power
output is 50 watts on 10, 6 and 2 meters and 35
watts on 430 MHz. It is like having two radios
in one with dedicated Volume/Squelch controls
on each side. Built in features include duplexer
and CTCSS/DCS Encode/Decode.
Features:
Cross-Band Repeat
V+U/V+V/U+U Dual Band Operation
V+U Full Duplex Operation
800 Memories
50 Watts Output (35 Watts on 430 MHz)
DCS
Backlit DTMF Mic
Alpha Numeric LCD
CTCSS Encode/Decode
DCS Encode/Decode
Smart Search
1200/9600 bps Packet Jack
Hyper Memory (store complete radio configuration)
Menu customization
ARTS? Auto-Range Transponder System
Internet Key for Access to WIRES?
This one works as it should. Cosmetically it looks
like new, with no defects.
With manual, DTMF Mic, power cord, and
mobile bracket for $550
.
Yaesu FP-707, 20 Amp Speaker/Power Supply:
The Yaesu FP-707 is a 20 amp 13.8 Volt DC
Power Supply, with a very nice front facing
speaker in the same enclosure.
Cosmetically, it matches the FT-707, FT-747,
FT-757 and likely others.
Electrically, it can provide up to 20 amps,
so will work with most any HF and/or VHF rig.
It also has a set of binding posts on the back
for easy connection of a rig in addition
to the HF rig.
The speaker has a 3.5 mm plug on it.
This particular unit is in very good shape
both electrically and cosmetically. I can
not find a scratch, dent, or ding on it.
Electrically, it works as it should.
Buy this unit with manual for $125.
.
Yaesu Crystal Filters
These fit the FT-1000 series, among others, and are for the 455 KHz IF.
XF-455K-202-01
2000 Hz wide for SSB $85
XF-455K-501-01
500 Hz wide for CW $110
.
Yaesu NC-9 B Charger
13 V DC at 45 ma, 2.5 mm plug; $12
.
Original Yaesu Manuals:
These are the manuals only. All are originals, and not copies.
Most are in close to new condition.
FNB-9,10,11,12 Battery packs, $2
FC-757AT Antenna Tuner, $10
FT-100 HF/VHF Transceiver, $18
FT-470 Dual Band HT, $10
FT-757 GX, HF Transceiver, $18
FT-720 R, 2 meter mobile, $8
FT-1802 M, 2 meter mobile, $12
FT-2700 Dual Band Xcvr, $12
FTH-2005 HT, $5
FTS-8 tone squelch unit, $3
FTS-12 tone squelch unit, $3
MH-1B A2B speaker microphone, $2
SP-101 P, Speaker / Phone patch, $5
VX-1 dual band HT, $10
Maintenance Service Manual for Yaesu FT-208 R
2 meter HT. Looks new. $25
These are original Yaesu operating manuals only,
in very nice condition.
.
I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.
.
Prices do not include shipping from Florida.
Thanks.
73,
Ken, W8EK
Ken Simpson
E-mail to W8EK@... or W8EK@...
Voice Phone (352) 732-8400
.
|
are these dynamic or electret? types? TIA 73
|
Follow the previous advice and protect your radios by shutting the one currently not being used for transmitting off.
On Tue, Dec 27, 2022, 8:52 AM KF0EVE. Brian via <brianhowe14= [email protected]> wrote: Thank you all for your replies. I think my safest bet is to have one radio completely shutdown while using the other?
Brian
> On Dec 27, 2022, at 7:45 AM, Donald Hellen <donhellen@...> wrote:
>
> ?On Tue, 27 Dec 2022 08:36:09 -0500, "Tim? K4SHF" <timothytapio1@...>
> wrote:
>
>> I would expect you are using separate antennas since one is a VHF/UHF and the other an HF rig....
>
>
> I missed that these are on completely different bands, but I would still be
> concerned about overloading the input of the unused radio, even when the
> frequencies are so far apart.
>
>
> Donald KX8K
>
>
>
>
>
> ----------------------------------------------------
> Some ham radio groups you may be interested in:
> /g/ICOM? ?/g/Ham-Antennas
> /g/HamRadioHelp? ? /g/Baofeng
> /g/CHIRP?
>
>
>
>
>
|
Thank you all for your replies. I think my safest bet is to have one radio completely shutdown while using the other
Brian
toggle quoted message
Show quoted text
On Dec 27, 2022, at 7:45 AM, Donald Hellen <donhellen@...> wrote:
?On Tue, 27 Dec 2022 08:36:09 -0500, "Tim K4SHF" <timothytapio1@...>
wrote:
I would expect you are using separate antennas since one is a VHF/UHF and the other an HF rig....
I missed that these are on completely different bands, but I would still be
concerned about overloading the input of the unused radio, even when the
frequencies are so far apart.
Donald KX8K
----------------------------------------------------
Some ham radio groups you may be interested in:
/g/ICOM /g/Ham-Antennas
/g/HamRadioHelp /g/Baofeng
/g/CHIRP
|
On Tue, 27 Dec 2022 08:36:09 -0500, "Tim K4SHF" <timothytapio1@...> wrote: I would expect you are using separate antennas since one is a VHF/UHF and the other an HF rig.... I missed that these are on completely different bands, but I would still be concerned about overloading the input of the unused radio, even when the frequencies are so far apart. Donald KX8K ---------------------------------------------------- Some ham radio groups you may be interested in: /g/ICOM /g/Ham-Antennas/g/HamRadioHelp /g/Baofeng/g/CHIRP
|
On" As using the same power supply? I would expect you are using separate antennas since one is a VHF/UHF and the other an HF rig....
I have had my FTM400 turned on alongside an Icom HF rig without issue, transmit with either and not impact the other...they share an Astron 50 amp linear power supply.
Is this what you're asking?
On Tue, Dec 27, 2022 at 7:54 AM Art Gribensk < kg4eyg@...> wrote: As long as they are using different antennas and the transmitter of one radio is not on the same frequency as the other radio in receive, should be no problem.? Art Gribensk
Good morning,
I have a FTDX 10 and FTM400. Is it ok to have both radios on at the same time?? Then with both radios on, will transmitting on one damage the other?
Thank you,
Brian K0BWH, 73
|
Brian . . . On Tue, 27 Dec 2022 06:06:35 -0600, "KF0EVE. Brian via groups.io" <brianhowe14@...> wrote: The DX10 is on a 35’ end fed and the other is a diamond 50X antenna. They are both in my attic. You're asking for trouble with the two antennas so close in proximity to one another if you don't take some action to isolate them or otherwise protect the radio not transmitting. If you have a coaxial switch that shorts the antenna terminals of the radio(s) not in use, you may get away with this. If you're using an inexpensive coaxial switch, how well it works in this case will depend on how well the switch isolates the unused terminals from the active one. Donald KX8K ---------------------------------------------------- Some ham radio groups you may be interested in: /g/ICOM /g/Ham-Antennas/g/HamRadioHelp /g/Baofeng/g/CHIRP
|
Thank you for your quick reply. The DX10 is on a 35’ end fed and the other is a diamond 50X antenna. They are both in my attic.?
toggle quoted message
Show quoted text
On Dec 27, 2022, at 3:52 AM, randy berger via groups.io <rpb672003@...> wrote:
?
I don't know about these radio's but anytime you have a transmitter going you don't want any other radios hooked up to the same antenna (with a couple of exceptions) . Also your receiver on a close frequency on another antenna would not be good.? The amount of power trnsmitted getting into a receiver burning out the front end by too much voltage being produced. 73....wb9qqa
On Monday, December 26, 2022 at 10:32:51 PM EST, KF0EVE. Brian via groups.io <brianhowe14@...> wrote:
Good morning,
I have a FTDX 10 and FTM400. Is it ok to have both radios on at the same time? ?Then with both radios on, will transmitting on one damage the other?
Thank you,
Brian K0BWH, 73
|
As long as they are using different antennas and the transmitter of one radio is not on the same frequency as the other radio in receive, should be no problem.? Art Gribensk
Good morning,
I have a FTDX 10 and FTM400. Is it ok to have both radios on at the same time?? Then with both radios on, will transmitting on one damage the other?
Thank you,
Brian K0BWH, 73
|
I don't know about these radio's but anytime you have a transmitter going you don't want any other radios hooked up to the same antenna (with a couple of exceptions) . Also your receiver on a close frequency on another antenna would not be good.? The amount of power trnsmitted getting into a receiver burning out the front end by too much voltage being produced. 73....wb9qqa
On Monday, December 26, 2022 at 10:32:51 PM EST, KF0EVE. Brian via groups.io <brianhowe14@...> wrote:
Good morning,
I have a FTDX 10 and FTM400. Is it ok to have both radios on at the same time? ?Then with both radios on, will transmitting on one damage the other?
Thank you,
Brian K0BWH, 73
|
Good morning,
I have a FTDX 10 and FTM400. Is it ok to have both radios on at the same time? ?Then with both radios on, will transmitting on one damage the other?
Thank you,
Brian K0BWH, 73
|
Re: Quad Bander, PS, Filters, Manuals and more FS
there it is...FP707...the memory is better than I thought
On Sat, Dec 24, 2022 at 11:00 AM Ken, W8EK < KenW8EK@...> wrote:
Quad Band Transceiver, Power Supply,
Crystal filters, Manuals, and
more For Sale:
.
Yaesu FT-8900 Quad Bander:
The Yaesu FT-8900R quad bander gives you power
and flexibility on the road. Operate 10 meters,
6 meters, 2 meters and 70 centimeters. High power
output is 50 watts on 10, 6 and 2 meters and 35
watts on 430 MHz. It is like having two radios
in one with dedicated Volume/Squelch controls
on each side. Built in features include duplexer
and CTCSS/DCS Encode/Decode.
Features:
Cross-Band Repeat
V+U/V+V/U+U Dual Band Operation
V+U Full Duplex Operation
800 Memories
50 Watts Output (35 Watts on 430 MHz)
DCS
Backlit DTMF Mic
Alpha Numeric LCD
CTCSS Encode/Decode
DCS Encode/Decode
Smart Search
1200/9600 bps Packet Jack
Hyper Memory (store complete radio configuration)
Menu customization
ARTS? Auto-Range Transponder System
Internet Key for Access to WIRES?
This one works as it should. Cosmetically it looks
like new, with no defects.
With manual, DTMF Mic, power cord, and
mobile bracket for $550
.
Yaesu FP-707, 20 Amp Speaker/Power Supply:
The Yaesu FP-707 is a 20 amp 13.8 Volt DC
Power Supply, with a very nice front facing
speaker in the same enclosure.
Cosmetically, it matches the FT-707, FT-747,
FT-757 and likely others.
Electrically, it can provide up to 20 amps,
so will work with most any HF and/or VHF rig.
It also has a set of binding posts on the back
for easy connection of a rig in addition
to the HF rig.
The speaker has a 3.5 mm plug on it.
This particular unit is in very good shape
both electrically and cosmetically. I can
not find a scratch, dent, or ding on it.
Electrically, it works as it should.
Buy this unit with manual for $125.
.
Yaesu Crystal Filters
These fit the FT-1000 series, among others, and are for the 455 KHz IF.
XF-455K-202-01
2000 Hz wide for SSB? $85
XF-455K-501-01
500 Hz wide for CW? $110
.
Yaesu NC-9 B Charger
13 V DC at 45 ma, 2.5 mm plug; $12
.
Original Yaesu Manuals:
These are the manuals only. All are originals, and not copies.
Most are in close to new condition.
FNB-9,10,11,12 Battery packs, $2
FC-757AT Antenna Tuner, $10
FT-100 HF/VHF Transceiver, $18
FT-470 Dual Band HT, $10
FT-757 GX, HF Transceiver, $18
FT-720 R, 2 meter mobile, $8
FT-1802 M, 2 meter mobile, $12
FT-2700 Dual Band Xcvr, $12
FTH-2005 HT, $5
FTS-8 tone squelch unit, $3
FTS-12 tone squelch unit, $3
MH-1B A2B speaker microphone, $2
SP-101 P, Speaker / Phone patch, $5
VX-1 dual band HT, $10
Maintenance Service Manual for Yaesu FT-208 R
2 meter HT. Looks new. $25
These are original Yaesu operating manuals only,
in very nice condition.
.
I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.
.
Prices do not include shipping from Florida.
Thanks.
73,
Ken, W8EK
Ken Simpson
E-mail to W8EK@... or W8EK@...
Voice Phone (352) 732-8400
.
|
Quad Bander, PS, Filters, Manuals and more FS
Quad Band Transceiver, Power Supply,
Crystal filters, Manuals, and
more For Sale:
.
Yaesu FT-8900 Quad Bander:
The Yaesu FT-8900R quad bander gives you power
and flexibility on the road. Operate 10 meters,
6 meters, 2 meters and 70 centimeters. High power
output is 50 watts on 10, 6 and 2 meters and 35
watts on 430 MHz. It is like having two radios
in one with dedicated Volume/Squelch controls
on each side. Built in features include duplexer
and CTCSS/DCS Encode/Decode.
Features:
Cross-Band Repeat
V+U/V+V/U+U Dual Band Operation
V+U Full Duplex Operation
800 Memories
50 Watts Output (35 Watts on 430 MHz)
DCS
Backlit DTMF Mic
Alpha Numeric LCD
CTCSS Encode/Decode
DCS Encode/Decode
Smart Search
1200/9600 bps Packet Jack
Hyper Memory (store complete radio configuration)
Menu customization
ARTS? Auto-Range Transponder System
Internet Key for Access to WIRES?
This one works as it should. Cosmetically it looks
like new, with no defects.
With manual, DTMF Mic, power cord, and
mobile bracket for $550
.
Yaesu FP-707, 20 Amp Speaker/Power Supply:
The Yaesu FP-707 is a 20 amp 13.8 Volt DC
Power Supply, with a very nice front facing
speaker in the same enclosure.
Cosmetically, it matches the FT-707, FT-747,
FT-757 and likely others.
Electrically, it can provide up to 20 amps,
so will work with most any HF and/or VHF rig.
It also has a set of binding posts on the back
for easy connection of a rig in addition
to the HF rig.
The speaker has a 3.5 mm plug on it.
This particular unit is in very good shape
both electrically and cosmetically. I can
not find a scratch, dent, or ding on it.
Electrically, it works as it should.
Buy this unit with manual for $125.
.
Yaesu Crystal Filters
These fit the FT-1000 series, among others, and are for the 455 KHz IF.
XF-455K-202-01
2000 Hz wide for SSB $85
XF-455K-501-01
500 Hz wide for CW $110
.
Yaesu NC-9 B Charger
13 V DC at 45 ma, 2.5 mm plug; $12
.
Original Yaesu Manuals:
These are the manuals only. All are originals, and not copies.
Most are in close to new condition.
FNB-9,10,11,12 Battery packs, $2
FC-757AT Antenna Tuner, $10
FT-100 HF/VHF Transceiver, $18
FT-470 Dual Band HT, $10
FT-757 GX, HF Transceiver, $18
FT-720 R, 2 meter mobile, $8
FT-1802 M, 2 meter mobile, $12
FT-2700 Dual Band Xcvr, $12
FTH-2005 HT, $5
FTS-8 tone squelch unit, $3
FTS-12 tone squelch unit, $3
MH-1B A2B speaker microphone, $2
SP-101 P, Speaker / Phone patch, $5
VX-1 dual band HT, $10
Maintenance Service Manual for Yaesu FT-208 R
2 meter HT. Looks new. $25
These are original Yaesu operating manuals only,
in very nice condition.
.
I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.
.
Prices do not include shipping from Florida.
Thanks.
73,
Ken, W8EK
Ken Simpson
E-mail to W8EK@... or W8EK@...
Voice Phone (352) 732-8400
.
|
Re: FT-200D digital modes
40 meters should be good for most digital work. As for the radio-specific interface needed, you might also try the Fox Tango group, which has a lot more members. And there are groups set up for the various digital modes once he picks one or more to try. Ham Radio Deluxe has a free 30-day trial period, but I'd see first if there's anyone near him who can help him set it up before starting the trial so he doesn't waste the 30 days. He'll want it to be working so he can give it a try. I don't use it much but will probably be using it more as I get used to the various digital modes. I use N3JFP for logging. You can get just the one logging program, or for $10 more, get the entire suite of loggers for special events like field day and many more. It's a lifetime license for either the main program or the entire suite. HRD is also a lifetime license but only for that full version or up to 1 year for a new version. After that, you need to pay again to get any new versions, or you can pay a maintenance fee every year and not be concerned about it. If you don't pay the fee, the program is yours to use forever, but you won't have any of the improvements made after the year is over. There's usually a sale for like 30% off around Hamvention time and they had one recently (may still be going on). Donald KX8K On Sun, 18 Dec 2022 16:49:08 +0000 (UTC), "Tyrone J.Burns Sr. via groups.io" <tyke1954@...> wrote: If you have any other ideas , feel free to let me know. ---------------------------------------------------- Some ham radio groups you may be interested in: /g/ICOM /g/Ham-Antennas/g/HamRadioHelp /g/Baofeng/g/CHIRP
|
Re: FT-200D digital modes
Tnx Donald,?
he is not new to radio and has been idle for a while, but has asked for help,in getting into digital modes!!? He has asked about it and i will endeavor to get him up and running.??
Myself, i am a voice person only. no digital or cw, no computer interface.? i am not keyboard proficent enough, dexterity is non existent for me, hunt and peck at best!
The software does not need to be free (he has the funds), but the most user friendly one would be nice...no sense buying different softwares' to find one he will like!!
he has the DMU-2000 to go with it and the 40m u'-tune external active filter unit , which is most likely not needed except for?
CW, but i digress at that point!!? he seems to like 40m!! Antenna is the 43 ft. Hygain/MFJ unit. he is HOA bound so has limits on antenna selection !!
If you have any other ideas , feel free to let me know.
Have a safe and MERRY CHRISTMAS!!
73
TYRONE J. BURNS?
cell: 985-687-2139 P.O.B. 442, 24430 Panther Rd. Springfield, La. 70462-0442
(Amateur Radio Station - N5XES)
Commander - AMVETS Post #68 - Springfield, La.
Past President - Southeast La. A.R.C., Inc.? ?(SELARC)
LCARC Region 9 Liason / region9@...
ARRL VE Liason - Florida Parishes VE Group, Springfield, Louisiana
"The difference between stupidity and genius, is that genius has its limits." Albert Einstein
On Sunday, December 18, 2022 at 10:10:04 AM CST, Donald Hellen <donhellen@...> wrote:
On Sat, 17 Dec 2022 20:24:39 -0800, "Tyrone J.Burns? Sr. via groups.io" <tyke1954= [email protected]> wrote: >Also which software covers all the digital modes. I don't believe there is any software that covers ALL of the digital modes. You didn't say if the software needed to be free or not. Ham Radio Deluxe has the DM-780 module that covers a lot of different digital modes. It's not free. It does come with multiple tools, including a logger that many like (there are several other popular logging programs, including the N3FJP and N1MM loggers). However, if free is important, you can use multiple programs to achieve the same end, but it may not be as convenient as using one program for most of your digital needs. The most popular program right now seems to be WSJT-X for FT-8 and some other digital modes. There are several programs that cover RTTY. Then there are other digital modes like Olivia. There's going to be an Olivia event on Feb 14, 2023, that will give you some activity to try out that mode with. You will need to determine your friend's needs and decide on which digital modes he or she wants to explore before picking a program. There are many different digital modes, and many programs to choose from. Donald KX8K ---------------------------------------------------- Some ham radio groups you may be interested in: /g/ICOM ? /g/Ham-Antennas/g/HamRadioHelp ? /g/Baofeng/g/CHIRP
|
Re: FT-200D digital modes
Tyrone . . . On Sat, 17 Dec 2022 20:24:39 -0800, "Tyrone J.Burns Sr. via groups.io" <tyke1954@...> wrote: Also which software covers all the digital modes. I don't believe there is any software that covers ALL of the digital modes. You didn't say if the software needed to be free or not. Ham Radio Deluxe has the DM-780 module that covers a lot of different digital modes. It's not free. It does come with multiple tools, including a logger that many like (there are several other popular logging programs, including the N3FJP and N1MM loggers). However, if free is important, you can use multiple programs to achieve the same end, but it may not be as convenient as using one program for most of your digital needs. The most popular program right now seems to be WSJT-X for FT-8 and some other digital modes. There are several programs that cover RTTY. Then there are other digital modes like Olivia. There's going to be an Olivia event on Feb 14, 2023, that will give you some activity to try out that mode with. You will need to determine your friend's needs and decide on which digital modes he or she wants to explore before picking a program. There are many different digital modes, and many programs to choose from. Donald KX8K ---------------------------------------------------- Some ham radio groups you may be interested in: /g/ICOM /g/Ham-Antennas/g/HamRadioHelp /g/Baofeng/g/CHIRP
|
A friend is wanting to try the digital modes on his FT-2000D. any recommendations of which interfaces work best with Yaesu FT-2000D.?
He has the optional DMU-2000 with it.?
Also which software covers all the digital modes.?
All help apreciated!!? N5XES
|
Tim K4SHF
Tyrone J.Burns Sr.