Inexpensive external S-Meter for certain Yaesu radios
I was looking for something else but saw this:
?
?
It's an external S-Meter for certain Yaesu radios for under $10 with free shipping. I can't vouch for the quality but even if the accuracy is off, it might be useful for a relative strength S-Meter.?
?
It only lists a few Yaesu radios but I would think any that have the same port that this plugs into might work with it, and if not, you're only out less than $10. You could sell it on your ARRL section swap site or take it with you to a hamfest if you're selling these.?
?
I've seen almost an identical S-Meter for these radios selling for many times more than this price, so I have to wonder if the vendor of that one bought these here?
?
I was hoping to find one for Icom radios or my 767 GX but I really don't need one for the 767, just my Icom 705, 7300, or 7100.?
?
Please--no China bashing. I'm not of Chinese descent, and don't like what's happening in the SE Asian area, but this isn't a group were we allow political discussions. CHina is capable of making some very high quality items for a moderate price, and some low quality items at a very low price, of course. I'm typing this on a Lenovo ThinkPad laptop, one of three that I have, and it's made as well as when IBM owned the ThinkPad trademark (before they sold the ThinkPad line to Lenovo). Since these are relatively inexpensive, I don't know if these are poorly made or not, but the price may be worth trying one if you have a radio that works with these.?
?
Donald KX8K
?
?
|
Yaesu Crystal Filters For Sale:
I have a variety of crystal and mechanical
filters available that fit Yaesu rigs.
All of these filters work 100% like they should,
and look great also.
.
The following filters are for the 8.2 MHz IF.
They fit the FT-1000 series, plus many, many others.
If you have a fairly modern Yaesu rig, they probably
fit, but check you manual.
Yaesu XF-8.2M-251-01, 250 Hz CW
filter for the 8.215 MHz IF. $75
Yaesu XF-8.2M-202-01, 2000 Hz SSB
filter for the 8.215 MHz IF. $75
.
The following filters are for the 455 KHz IF.
They fit the FT-1000 series, plus many, many others.
If you have a fairly modern Yaesu rig, they probably
fit, but check you manual. As a general statement,
the filters for the 455 KHz IF are sharper, with
steeper skirts.
XF-455K-501-01
500 Hz wide for CW $115
.
The following filters are Collins Mechanical
Filters designed for a 455.0 KHz IF. This
means they have characteristics generally
considered better than crystal filters.
These are no longer being manufactured.
-
These filters fit a variety of rigs. They
were used in a TenTec Omni VII, but I am
told they also fit many Yaesu rigs.
Please check the numbers.
Collins 526-8693-010
500 Hz CW filter
Also known as TenTec 2031
Collins 526-8733-010
300 Hz narrow CW filter
Also known as TenTec 2032
-
These filters are $200 each.
Prices do not include shipping from Florida.
Thanks.
73,
Ken, W8EK
Ken Simpson
E-mail to W8EK@... or W8EK@...
Voice Phone (352) 732-8400
.
|
Dual Band HTs, HF + VHF + UHF Transceiver,
Power Supply, Manuals, and more For Sale:
.
Yaesu FT-470 Dual Band HT:
The innovative Yaesu FT-470 2M/440 HT has many
sophisticated features, built into a robustly
built chassis with easy-to-use external controls.
It boasts four VFOs and 42 memories plus an
impressive backlit dual band LCD. Power output
can be as high at 5 watts depending on battery
pack used. It has a very "tight" front end on
the receiver, keeping a lot of intermod out.
Features:
42 Memories
4 VFOs
DTMF Keypad
DTMF Auto Dialer
Scanning
Backlit Keypad
CTCSS Encode
Auto Repeater Shift
Auto Power Off
This particular unit works 100% and looks extremely nice.
It has an aftermarket FNB-12, 12 volt 700 mahr battery
pack. Also included is the dual band rubber duck antenna,
wrist strap, wall charger, and paper work for $100
.
Yaesu FT-60 Dual Band HT:
The Yaesu FT-60R dual-band 2 meter/440 MHz HT
has 5 watts output on both bands. It also features
wideband receive from 108-520 and 700 to
999.990 MHz.
It includes One touch NOAA weather, nine DTMF
auto dialer memories, die-cast weather resistant
case, ARTS Auto-range transponder system.
2.3 x 4.3 x 1.2 inches, 13.1 oz
Features:
Over 1000 Memories
5 Watts RF Output
Backlit Keypad
Alphanumeric Display
NOAA Weather Alert
PL Encode/Decode
CS Encode/Decode
Emergency Auto ID System
This one works fine and looks fine. No scratches
or defects. It includes rubber duck, belt clip,
FNB-83 battery, charger, and paper work for $100
.
Yaesu FT-847 HF+++ Transceiver:
The Yaesu FT-847 changes base operation
forever. Now you get three radios in one
-- HF, VHF/UHF and satellite. You get 100
watt output on HF and 6 Meters, plus 50
watts on both 2 Meters and 430 MHz bands.
Additional features include: Cross-band
Full Duplex operation, Normal/Reverse
Tracking, CTCSS/DCS Encode and Decode,
0.1 Hz tuning steps, DSP Notch, DSP NR
and DSP BPF, Shuttle Jog Tuning Dial,
Carry Handle and Keypad Entry.
The FT-847 is also 1200/9600 bps Packet
ready.
10.2 x 3.4 x 10.6 inches.
Features:
HF/VHF/UHF
DSP Filters
Dual Watch
0.1 Hz Tuning
CTCSS/DCS Decode and Encoode
Cross-band Full Duplex
1200/9600 Packet Ready
It covers all of the normal ham bands in one
package with virtually all modes!
This one works 100% and looks like new.
No defects.
With paper work for $775.
.
Yaesu FP-707, 20 Amp Speaker/Power Supply:
The Yaesu FP-707 is a 20 amp 13.8 Volt DC
Power Supply, with a very nice front facing
speaker in the same enclosure.
Cosmetically, it matches the FT-707, FT-747,
FT-757 and likely others.
Electrically, it can provide up to 20 amps,
so will work with most any HF and/or VHF rig.
It also has a set of binding posts on the back
for easy connection of a rig in addition
to the HF rig.
The speaker has a 3.5 mm plug on it.
This particular unit is in very good shape
both electrically and cosmetically. I can
not find a scratch, dent, or ding on it.
Electrically, it works as it should.
Buy this unit with manual for $120.
.
Yaesu NC-9 B Charger
13 V DC at 45 ma, 2.5 mm plug; $12
.
Original Yaesu Manuals:
These are the manuals only. All are originals, and not copies.
Most are in close to new condition.
FNB-9,10,11,12 Battery packs, $2
FC-757AT Antenna Tuner, $10
FT-100 HF/VHF Transceiver, $18
FT-470 Dual Band HT, $10
FT-757 GX, HF Transceiver, $18
FT-720 R, 2 meter mobile, $8
FT-1802 M, 2 meter mobile, $12
FT-2700 Dual Band Xcvr, $12
FTH-2005 HT, $5
FTS-8 tone squelch unit, $3
FTS-12 tone squelch unit, $3
MH-1B A2B speaker microphone, $2
SP-101 P, Speaker / Phone patch, $5
VX-1 dual band HT, $10
Maintenance Service Manual for Yaesu FT-208 R
2 meter HT. Looks new. $25
Technical Supplement for Yaesu FT-2700
Dual Band Mobile. Looks new. $20
These are original Yaesu operating manuals only,
in very nice condition.
.
I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.
.
Prices do not include shipping from Florida.
Thanks.
73,
Ken, W8EK
Ken Simpson
E-mail to W8EK@... or W8EK@...
Voice Phone (352) 732-8400
|
On you taskbar lower right hand. The little speaker icon. Right
click it. Click sound. Scroll down till you see ease of access
audio settings. click it. Turn on mono audio.
On 7/5/2024 2:11 AM, Robert Meadows via
groups.io wrote:
toggle quoted message
Show quoted text
No such place like that on my
Windows 10 computer. No mono setting anywhere.
Bob
+++++++
In win 10, click on your sound icon, good to ease
of access, turn on mono
On
7/4/2024 4:15 PM, Robert Meadows via groups.io
wrote:
I don't know how to even do that.
Bob
++++++++
did you try setting your audio
to mono on your computer?
On 7/4/2024 10:17 AM, duane hayes wrote:
> Ran the FTDX10 remotely also.? Audio
settings on PC were tricky, but
> worked.? While on my home network (ham
shack is 100 yds from my house)
> everything always worked, but over the
internet, no waterfall.? Same
> with my FTDX101D.? Don't remember only
one side of audio playing.,
> K0BBB
>
> On Wed, Jul 3, 2024 at 10:35?AM Robert
Meadows via groups.io
> <w6mtm@...>
wrote:
>> Thanks Don.
>> The problem I am having is running
the Yaesu FTdx10 remotely. The problem is
what I only have audio coming out of one
speaker on my laptop, not both as it should
be. I have tried headphones and USB speakers
and they have the same problem. It is not a
problem with my laptop or Windows 10, it is
probably the software that runs the
SCU-LAN10 unit and radio.
>> Best regards sir,? Bob? W6MTM
>> ++++++
>>
>> On Tuesday, July 2, 2024 at
04:40:37 PM EDT, Donald Hellen < donhellen@...>
wrote:
>>
>>
>> On Tue, Jul 2, 2024 at 04:32 PM,
Robert Meadows wrote:
>>
>> Can I get help with FTdx10 issues
on this page?
>>
>> Certainly. We are a small group
here with 136 members, but post your
question or issue and we'll see if anyone
here can help.
>>
>> If we can't help you contact me
off-list and I'll send you some other
options for where to post your
question/issue. Give it a few days first.
Many people don't check their email daily. I
don't always check my groups.io folders
daily but I do check my inbox daily (I use
folders in my email program to route posts
to their own folder, one folder for each
group or for a few related groups, to keep
my regular email inbox less cluttered, so I
can quickly see if I need to address any
email.
>>
>> Donald KX8K
>>
>
>
>
>
|
No such place like that on my Windows 10 computer. No mono setting anywhere. Bob +++++++
In win 10, click on your sound icon, good to ease of access, turn
on mono
On 7/4/2024 4:15 PM, Robert Meadows via
groups.io wrote:
I don't know how to even do
that.
Bob
++++++++
did you try setting your audio to mono on
your computer?
On 7/4/2024 10:17 AM, duane hayes wrote:
> Ran the FTDX10 remotely also.? Audio settings on PC
were tricky, but
> worked.? While on my home network (ham shack is 100
yds from my house)
> everything always worked, but over the internet, no
waterfall.? Same
> with my FTDX101D.? Don't remember only one side of
audio playing.,
> K0BBB
>
> On Wed, Jul 3, 2024 at 10:35?AM Robert Meadows via
groups.io
> <w6mtm@...> wrote:
>> Thanks Don.
>> The problem I am having is running the Yaesu
FTdx10 remotely. The problem is what I only have audio
coming out of one speaker on my laptop, not both as it
should be. I have tried headphones and USB speakers and
they have the same problem. It is not a problem with my
laptop or Windows 10, it is probably the software that
runs the SCU-LAN10 unit and radio.
>> Best regards sir,? Bob? W6MTM
>> ++++++
>>
>> On Tuesday, July 2, 2024 at 04:40:37 PM EDT,
Donald Hellen < donhellen@...>
wrote:
>>
>>
>> On Tue, Jul 2, 2024 at 04:32 PM, Robert Meadows
wrote:
>>
>> Can I get help with FTdx10 issues on this page?
>>
>> Certainly. We are a small group here with 136
members, but post your question or issue and we'll see
if anyone here can help.
>>
>> If we can't help you contact me off-list and
I'll send you some other options for where to post your
question/issue. Give it a few days first. Many people
don't check their email daily. I don't always check my
groups.io folders daily but I do check my inbox daily (I
use folders in my email program to route posts to their
own folder, one folder for each group or for a few
related groups, to keep my regular email inbox less
cluttered, so I can quickly see if I need to address any
email.
>>
>> Donald KX8K
>>
>
>
>
>
|
In win 10, click on your sound icon, good to ease of access, turn
on mono
On 7/4/2024 4:15 PM, Robert Meadows via
groups.io wrote:
toggle quoted message
Show quoted text
I don't know how to even do
that.
Bob
++++++++
did you try setting your audio to mono on
your computer?
On 7/4/2024 10:17 AM, duane hayes wrote:
> Ran the FTDX10 remotely also.? Audio settings on PC
were tricky, but
> worked.? While on my home network (ham shack is 100
yds from my house)
> everything always worked, but over the internet, no
waterfall.? Same
> with my FTDX101D.? Don't remember only one side of
audio playing.,
> K0BBB
>
> On Wed, Jul 3, 2024 at 10:35?AM Robert Meadows via
groups.io
> <w6mtm@...> wrote:
>> Thanks Don.
>> The problem I am having is running the Yaesu
FTdx10 remotely. The problem is what I only have audio
coming out of one speaker on my laptop, not both as it
should be. I have tried headphones and USB speakers and
they have the same problem. It is not a problem with my
laptop or Windows 10, it is probably the software that
runs the SCU-LAN10 unit and radio.
>> Best regards sir,? Bob? W6MTM
>> ++++++
>>
>> On Tuesday, July 2, 2024 at 04:40:37 PM EDT,
Donald Hellen < donhellen@...>
wrote:
>>
>>
>> On Tue, Jul 2, 2024 at 04:32 PM, Robert Meadows
wrote:
>>
>> Can I get help with FTdx10 issues on this page?
>>
>> Certainly. We are a small group here with 136
members, but post your question or issue and we'll see
if anyone here can help.
>>
>> If we can't help you contact me off-list and
I'll send you some other options for where to post your
question/issue. Give it a few days first. Many people
don't check their email daily. I don't always check my
groups.io folders daily but I do check my inbox daily (I
use folders in my email program to route posts to their
own folder, one folder for each group or for a few
related groups, to keep my regular email inbox less
cluttered, so I can quickly see if I need to address any
email.
>>
>> Donald KX8K
>>
>
>
>
>
|
I don't know how to even do that. Bob ++++++++
did you try setting your audio to mono on your computer?
On 7/4/2024 10:17 AM, duane hayes wrote: > Ran the FTDX10 remotely also.? Audio settings on PC were tricky, but > worked.? While on my home network (ham shack is 100 yds from my house) > everything always worked, but over the internet, no waterfall.? Same > with my FTDX101D.? Don't remember only one side of audio playing., > K0BBB > > On Wed, Jul 3, 2024 at 10:35?AM Robert Meadows via groups.io > <w6mtm@...> wrote: >> Thanks Don. >> The problem I am having is running the Yaesu FTdx10 remotely. The problem is what I only have audio coming out of one speaker on my laptop, not both as it should be. I have tried headphones and USB speakers and they have the same problem. It is not a problem with my laptop or Windows 10, it is probably the software that runs the SCU-LAN10 unit and radio. >> Best regards sir,? Bob? W6MTM >> ++++++ >> >> On Tuesday, July 2, 2024 at 04:40:37 PM EDT, Donald Hellen < donhellen@...> wrote: >> >> >> On Tue, Jul 2, 2024 at 04:32 PM, Robert Meadows wrote: >> >> Can I get help with FTdx10 issues on this page? >> >> Certainly. We are a small group here with 136 members, but post your question or issue and we'll see if anyone here can help. >> >> If we can't help you contact me off-list and I'll send you some other options for where to post your question/issue. Give it a few days first. Many people don't check their email daily. I don't always check my groups.io folders daily but I do check my inbox daily (I use folders in my email program to route posts to their own folder, one folder for each group or for a few related groups, to keep my regular email inbox less cluttered, so I can quickly see if I need to address any email. >> >> Donald KX8K >> > > > >
|
did you try setting your audio to mono on your computer?
toggle quoted message
Show quoted text
On 7/4/2024 10:17 AM, duane hayes wrote: Ran the FTDX10 remotely also. Audio settings on PC were tricky, but
worked. While on my home network (ham shack is 100 yds from my house)
everything always worked, but over the internet, no waterfall. Same
with my FTDX101D. Don't remember only one side of audio playing.,
K0BBB
On Wed, Jul 3, 2024 at 10:35?AM Robert Meadows via groups.io
<w6mtm@...> wrote:
Thanks Don.
The problem I am having is running the Yaesu FTdx10 remotely. The problem is what I only have audio coming out of one speaker on my laptop, not both as it should be. I have tried headphones and USB speakers and they have the same problem. It is not a problem with my laptop or Windows 10, it is probably the software that runs the SCU-LAN10 unit and radio.
Best regards sir, Bob W6MTM
++++++
On Tuesday, July 2, 2024 at 04:40:37 PM EDT, Donald Hellen <donhellen@...> wrote:
On Tue, Jul 2, 2024 at 04:32 PM, Robert Meadows wrote:
Can I get help with FTdx10 issues on this page?
Certainly. We are a small group here with 136 members, but post your question or issue and we'll see if anyone here can help.
If we can't help you contact me off-list and I'll send you some other options for where to post your question/issue. Give it a few days first. Many people don't check their email daily. I don't always check my groups.io folders daily but I do check my inbox daily (I use folders in my email program to route posts to their own folder, one folder for each group or for a few related groups, to keep my regular email inbox less cluttered, so I can quickly see if I need to address any email.
Donald KX8K
|
Ran the FTDX10 remotely also. Audio settings on PC were tricky, but worked. While on my home network (ham shack is 100 yds from my house) everything always worked, but over the internet, no waterfall. Same with my FTDX101D. Don't remember only one side of audio playing., K0BBB On Wed, Jul 3, 2024 at 10:35?AM Robert Meadows via groups.io <w6mtm@...> wrote:
Thanks Don.
The problem I am having is running the Yaesu FTdx10 remotely. The problem is what I only have audio coming out of one speaker on my laptop, not both as it should be. I have tried headphones and USB speakers and they have the same problem. It is not a problem with my laptop or Windows 10, it is probably the software that runs the SCU-LAN10 unit and radio.
Best regards sir, Bob W6MTM
++++++
On Tuesday, July 2, 2024 at 04:40:37 PM EDT, Donald Hellen <donhellen@...> wrote:
On Tue, Jul 2, 2024 at 04:32 PM, Robert Meadows wrote:
Can I get help with FTdx10 issues on this page?
Certainly. We are a small group here with 136 members, but post your question or issue and we'll see if anyone here can help.
If we can't help you contact me off-list and I'll send you some other options for where to post your question/issue. Give it a few days first. Many people don't check their email daily. I don't always check my groups.io folders daily but I do check my inbox daily (I use folders in my email program to route posts to their own folder, one folder for each group or for a few related groups, to keep my regular email inbox less cluttered, so I can quickly see if I need to address any email.
Donald KX8K
|
Thanks Don.? The problem I am having is running the Yaesu FTdx10 remotely. The problem is what I only have audio coming out of one speaker on my laptop, not both as it should be. I have tried headphones and USB speakers and they have the same problem. It is not a problem with my laptop or Windows 10, it is probably the software that runs the SCU-LAN10 unit and radio.?
Best regards sir,? Bob? W6MTM ++++++
On Tue, Jul 2, 2024 at 04:32 PM, Robert Meadows wrote:
Can I get help with FTdx10 issues on this page??
Certainly. We are a small group here with 136 members, but post your question or issue and we'll see if anyone here can help.? If we can't help you contact me off-list and I'll send you some other options for where to post your question/issue. Give it a few days first. Many people don't check their email daily. I don't always check my groups.io folders daily but I do check my inbox daily (I use folders in my email program to route posts to their own folder, one folder for each group or for a few related groups, to keep my regular email inbox less cluttered, so I can quickly see if I need to address any email.? Donald KX8K
|
Well Duane I don't think you will be able to help me with the issue I have. The problem I am having is running the Yaesu FTdx10 remotely. The problem is what I only have audio coming out of one speaker on my laptop, not both as it should be. I have tried headphones and USB speakers and they have the same problem. It is not a problem with my laptop or Windows 10, it is probably the software that runs the SCU-LAN10 unit and radio.? Thanks, Bob? W6MTM +++++++++
used to own one.? What is the help needed ?
On Tue, Jul 2, 2024 at 3:32?PM Robert Meadows via groups.io
<w6mtm@...> wrote:
>
> Can I get help with FTdx10 issues on this page?? Thanks, Bob? W6MTM
>
|
Re: FTDX10 Tuning and Transmitting somehow blocked after changing band
On Tue, Jul 2, 2024 at 05:19 PM, <dc0la@...> wrote:
Is there a way to delete stored tuner data only?
I found this thread in another group: /g/ftdx-10/topic/auto_tune_memory_clear/101993594
It appears that you can't clear memories manually, but if you force a re-rune every 10 KHz or so across a band, it will write the new settings it will over-write the old settings.? Donald KX8K
|
Re: FTDX10 Tuning and Transmitting somehow blocked after changing band
switch to a different antenna entirely and tune that and then
switch back and tune again.
toggle quoted message
Show quoted text
Dear OMs,
I work my DX10 with an EFHW on 40/20/15/10m and a 1:64 Balun.
Tuning was working fine for a while and I had rapports 55 to 59
within Europe. I never saw the "High SWR" warning in the display,
worked SSB only and did either have SWR or Power displayed in the
meter. I also checked operation with a chain of power attenuators.
SWR 1.1 or less here without tuning.
After Power up I can tune on the band where it is with the normal
long relais klicking and also transmit with full power. When I
switch the band eg. 7MHz to 14MHz and press the tune button long
there is only a short relay click and tuning ends. No error
message, it's just back in rx. With a short press I can switch
tuning on/off.
Now in this case there is no TX power output. When I try to send
the TX light is on, power setting is at 100W but the power meter
is fixed at zero.
After a complete system power cycle I can transmit again with full
power. The Device is ~3 Month old, nothing gets hot, all is clean.
AS said above I get the same with antenna and attenuator at the
output.
Anybody an idea?
Is there a way to delete stored tuner data only?
I received the info to try a factory reset, but this would also
kill my audio settings I did several weeks ago.
73 DC0LA
|
FTDX10 Tuning and Transmitting somehow blocked after changing band
Dear OMs,
I work my DX10 with an EFHW on 40/20/15/10m and a 1:64 Balun. Tuning was working fine for a while and I had rapports 55 to 59 within Europe. I never saw the "High SWR" warning in the display, worked SSB only and did either have SWR or Power displayed in the meter. I also checked operation with a chain of power attenuators. SWR 1.1 or less here without tuning.
After Power up I can tune on the band where it is with the normal long relais klicking and also transmit with full power. When I switch the band eg. 7MHz to 14MHz and press the tune button long there is only a short relay click and tuning ends. No error message, it's just back in rx. With a short press I can switch tuning on/off.
Now in this case there is no TX power output. When I try to send the TX light is on, power setting is at 100W but the power meter is fixed at zero.
After a complete system power cycle I can transmit again with full power. The Device is ~3 Month old, nothing gets hot, all is clean. AS said above I get the same with antenna and attenuator at the output.
Anybody an idea?
Is there a way to delete stored tuner data only?
I received the info to try a factory reset, but this would also kill my audio settings I did several weeks ago.
73 DC0LA
|
If you don't have one now, just sit quietly and wish you had kept it.
toggle quoted message
Show quoted text
On 7/2/2024 4:33 PM, duane hayes wrote: used to own one. What is the help needed ?
On Tue, Jul 2, 2024 at 3:32?PM Robert Meadows via groups.io
<w6mtm@...> wrote:
Can I get help with FTdx10 issues on this page? Thanks, Bob W6MTM
|
On Tue, Jul 2, 2024 at 04:32 PM, Robert Meadows wrote:
Can I get help with FTdx10 issues on this page??
Certainly. We are a small group here with 136 members, but post your question or issue and we'll see if anyone here can help.? If we can't help you contact me off-list and I'll send you some other options for where to post your question/issue. Give it a few days first. Many people don't check their email daily. I don't always check my groups.io folders daily but I do check my inbox daily (I use folders in my email program to route posts to their own folder, one folder for each group or for a few related groups, to keep my regular email inbox less cluttered, so I can quickly see if I need to address any email.? Donald KX8K
|
used to own one. What is the help needed ? On Tue, Jul 2, 2024 at 3:32?PM Robert Meadows via groups.io <w6mtm@...> wrote:
Can I get help with FTdx10 issues on this page? Thanks, Bob W6MTM
|
Can I get help with FTdx10 issues on this page?? Thanks, Bob? W6MTM
|
hi, there is standard a 500hz cw filter in the second if, 8,83mhz
most it be activated or can be deactivated per? menu,
or is it all the time present in cw mode,
i have the radio only since few days
carlos on6cn
|
The microphone cable on my FT-8800 has given up the ghost, and no longer works properly. The insulation has worn out, exposing bare copper. Does anyone have experience replacing the cable only (YAESU T9206534 (it's half the price of the entire microphone assembly)??
Thank you - 73!
Karl Kaucher
KK4KRK
|
Robert Meadows
Karl Kaucher