开云体育

Correct, And it is originated from the Boosters. They have the same HW/FW LocoNet Bug as the DR4088LN.... Well.... if someone around in the scene ( albeit Ryan ;) ) has one of these: PICKIT3.5

If you want to downgrade the DR5000 from V1.6.x to 1.5.5 here is a step-by-step video. https://youtu.be/Ym13BrAsmxs -- Dennis Cherry Owner/Moderator

As far as I know, there is nothing you can do to fix the problem other than not clicking on the Boosters tab.? You can use all the other tabs under LocoNet B, just not the Boosters tab. If you are

Yamorc.de Sent: Tuesday, July 18, 2023 4:00 PM To: [email protected] Subject: Re: YaMoRC, Digikeijs, JMRI, English Questions for Karst: Timeline for YaMoRc systems arriving in US plus user

Is there a new website where YaMoRc documentation and firmware is available? It appears that the old Digikeigs.us website is no longer available.

When this is happening the layout is on, there are 8 boosters connected as part of the layout but there are no trains running and no other activity on the layout; no signals are connected, no turnout

Sorry for your loss.? Thanks for the update.

Got very quick support fro Karst, i tried usign another computer and that solved the problem, seems to have been an issue with driver installations. Regards Magnus

Many thanks

Unfortunately none of these worked either on their own or all together. Maybe faulty DR5013 is the issue then? Also Train Controller software V8 did not like the auto-cutout? polarity on DR5000 being

Hi, I have installed an Yd9401 in my Dr5000 and followed the instructions. After entering the Dr5000 activation code and running update, the update failed. I was never asked for the second activation

The reliable version of the firmware (v1.5.5) is available in the files section of this group, as is the final version created by Digikeijs (v1.6.3). No need to ask for it, or go searching ?

there you go mate DR5000-V1.6.3.zip <https://drive.google.com/file/d/18H3-lC2XN9xkvCs5XJ2zwKPxySOZR-CH/view?usp=drive_web> darshan@...> wrote:

Hi, I am using firmware 1.6.1 on my computer and want to have the same installed onto another laptop which I want to connect to my exhibition layout. Can someone share this version which I can install

Nice! ??

Thanks. I will try that.? I have a dr5000 and dr5033.? The 5013 is fed by the 5033.? What should the short circuit delay be, I set it to factory defaults? Regards, John

Hi Iain, I have set the LNCV 3 to 10. -Chris

Chris, “I have setup both DR5033 configuration variable to 10”. Which LNCV have you set to 10? Sent: Sunday, July 16, 2023 6:41 PM To: [email protected] Subject: YaMoRC, Digikeijs, JMRI, English

I have a DR5000 running firmware 1.6.3 and two DR5033 boosters. I am using the Loconet B bus. I have setup both DR5033 configuration variable to 10. From my understanding, this setting should prevent

I think, now that DK is bankrupt, there would be no problem. But as I understood from some Beta testers, DK made them make sign an NDA... However, why should one one such a "hybrid", ugly solution.