开云体育

You will always need to press the programming button on the DR4018 because that is what enables writing of the CVs to that address - it doesn’t matter if you change the unit address, you will always

My signals are controlled from a custom program script written in Jython language which works seamlessly with JMRI. I'd like to be able to change the cvs in the dr4018 without having to manually press

Can you explain the "CV's on the fly in a script in JMRI"? What do you want to change? -- Dennis Cherry Owner/Moderator

I have (3) DR4018 working fine controlling 16 LEDs. Is it possible to change the DCC address to something other than 9999 using CV1? I'd like to configure CVs on the fly via a JMRI script without

Hi,here you can buy 2pieces. https://skylots.org/6588180055/DR5088RC+16-kanalnyy+RailCom+modul+obratnoy+svyazi+dlya+Roco+Z21DR5000Piko

Karst, 3144

Well I don't know what is going on. ?Based on these photos my DR5000 (Now YD7001) has the resistors in the proper orientation. When I hook up my test layout to a Lenz LZV100 everything reads out on

It controls the wait time before power is applied to the track when ?auto power“ is checked.

Hi In the YD7001 app, on the Control Properties windows under the Settings tab, there is a setting called Start-up Delay with a default of 2500 ms (Control Properties is accessed by clicking on

Eric, I have two thoughts on this. Having used Parallels in the past and given up on moving it over to my M1 Macbook Air (for other uses, not related to model railroading), I think Parallels will

The DKR50018 also programs like the DR4018 units. Only no Bluetooth function. Dennis Sent: Friday, January 12, 2024 1:26 PM To: [email protected] Subject: YaMoRC, Digikeijs, JMRI, English

According to the Parallels resources guide it will run Windows 11 Pro on an M1 MBP (it doesn't list prior versions of Windows). ?My old VM was Win7 and I haven't tried to upgrade, but it looks like

Not sure the Windows on an M1 with Parallels is correct. I have an M1 MacBook Pro with Parallels and I can run Windows 10 with train controller. You have to have the right version of windows. I

Thanks, I agree that YoMaRC looks promising, but I don't know if I'm willing to wait until they actually have products for purchase. ?And products from a dead company probably aren't my best option,

As the App to configure the DK50018 via bluetooth is no longer available on the App Store how are people going about configuring theses units?

Your first problem is that Digikeijs doesn’t exist anymore and one of their products are now manufactured therefore you will be buying either old stock or second-hand stock, and in both cases

Contemplating using the DR5000 and related peripherals such as the DR5088RC. ?This would be controlled using JMRI. ?But, I have a Mac with the M1 processor, and it appears that Digikeijs software

Hi, What is your DR5000 serialnumber ? We found out, that large ranges in serial numbers have the components for the RS-Bus interface incorrectly mounted. As Digikeijs did not too much testing on

Purchased YD9401 and converted DR5000 to YD7001. I connected this to my layout that was using Lenz DCC. I have been able to control Locomotives. But I am having difficulty reading the RS bus. When I

Jay, It's not the lack of internet, as I've used the PT on a network with no internet at train shows to connect to an NCE system. I have not personally used PT with the YD7001 yet, I did use it with