Well I’ve no idea if it’ll take it as the signal leds aren’t on, this is why I’m asking for help as it doesn’t mention that in the manual. I have the address on the layout on the z21 app ready to go.
Regards
toggle quoted message
Show quoted text
On 23 Jun 2019, at 21:35, James < James@...> wrote: To be fair I always set the start address of the dr4018 before I ever set cv47 it always works This way for me.? James On Sun, 23 Jun 2019 at 21:33, andrew whitaker via Groups.Io <andy9202= [email protected]> wrote: No because I’m not doing that yet, I need to change the preset in CV47 from 1 to 2, from po) ts to signals, so I can then set the start address for my signals.
Cheers
Andy
> On 23 Jun 2019, at 21:01, Chris Youlden <lists@...> wrote:
>
> Hi Andrew
>
> Have you set the start address for the 4018?
>
> Chris
>
>> On 23/06/2019 19:51, andrew whitaker via Groups.Io wrote:
>> Hi, need help with programming cv47 on a dr4018, I’ve followed the instructions in the manual for using the Z21 app and set up a dummy loco with address 9999, added the F0 function and then pressed the button on the 4018 got a steady red light, entered the address 9999, cv47 and set CV to 2 as I’m using it for signals, press the button to turn red light off on the 4018 but nothing happens, signals aren’t coming on for me to set them. What am I missing?
>> cheers Andy
|
To be fair I always set the start address of the dr4018 before I ever set cv47 it always works This way for me.? James
On Sun, 23 Jun 2019 at 21:33, andrew whitaker via Groups.Io <andy9202= [email protected]> wrote: No because I’m not doing that yet, I need to change the preset in CV47 from 1 to 2, from po) ts to signals, so I can then set the start address for my signals.
Cheers
Andy
> On 23 Jun 2019, at 21:01, Chris Youlden <lists@...> wrote:
>
> Hi Andrew
>
> Have you set the start address for the 4018?
>
> Chris
>
>> On 23/06/2019 19:51, andrew whitaker via Groups.Io wrote:
>> Hi, need help with programming cv47 on a dr4018, I’ve followed the instructions in the manual for using the Z21 app and set up a dummy loco with address 9999, added the F0 function and then pressed the button on the 4018 got a steady red light, entered the address 9999, cv47 and set CV to 2 as I’m using it for signals, press the button to turn red light off on the 4018 but nothing happens, signals aren’t coming on for me to set them. What am I missing?
>> cheers Andy
>> _._,_._,_
>> ------------------------------------------------------------------------
>> 开云体育 Links:
>
>
>
>
>
>
-- Many Thanks James Hudson DCC Train Automation
|
No because I’m not doing that yet, I need to change the preset in CV47 from 1 to 2, from po) ts to signals, so I can then set the start address for my signals.
Cheers
Andy
toggle quoted message
Show quoted text
On 23 Jun 2019, at 21:01, Chris Youlden <lists@...> wrote:
Hi Andrew
Have you set the start address for the 4018?
Chris
On 23/06/2019 19:51, andrew whitaker via Groups.Io wrote:
Hi, need help with programming cv47 on a dr4018, I’ve followed the instructions in the manual for using the Z21 app and set up a dummy loco with address 9999, added the F0 function and then pressed the button on the 4018 got a steady red light, entered the address 9999, cv47 and set CV to 2 as I’m using it for signals, press the button to turn red light off on the 4018 but nothing happens, signals aren’t coming on for me to set them. What am I missing?
cheers Andy
_._,_._,_
------------------------------------------------------------------------
开云体育 Links:
|
toggle quoted message
Show quoted text
On 23 Jun 2019, at 20:59, James < James@...> wrote: I will do a video tomorrow morning for you. I have done one on this but maybe a more up to date might be good.? James DCC Train Automation This is how I program my DR4018s ? From: [email protected] <[email protected]> On Behalf Of andrew whitaker via Groups.Io
Sent: 23 June 2019 19:52
To: [email protected]
Subject: [Digikeijs], JMRI, Rocrail, Itrain, Walthers, Tortise, Cobalt, Switch Machine, Roco, Throttle Dr4018 ? Hi, need help with programming cv47 on a dr4018, I’ve followed the instructions in the manual for using the Z21 app and set up a dummy loco with address 9999, added the F0 function and then pressed the button on the 4018 got a steady red light, entered the address 9999, cv47 and set CV to 2 as I’m using it for signals, press the button to turn red light off on the 4018 but nothing happens, signals aren’t coming on for me to set them. What am I missing?
cheers Andy
-- Many Thanks James Hudson DCC Train Automation
|
Hi Iain,
I only have the Z21 app, I’m using it via a dr5000 so I don’t have that screen, thanks anyway.
toggle quoted message
Show quoted text
On 23 Jun 2019, at 20:57, Iain Morrison < w.iain.morrison@...> wrote: This is how I program my DR4018s ? From: [email protected] <[email protected]> On Behalf Of andrew whitaker via Groups.Io
Sent: 23 June 2019 19:52
To: [email protected]
Subject: [Digikeijs], JMRI, Rocrail, Itrain, Walthers, Tortise, Cobalt, Switch Machine, Roco, Throttle Dr4018 ? Hi, need help with programming cv47 on a dr4018, I’ve followed the instructions in the manual for using the Z21 app and set up a dummy loco with address 9999, added the F0 function and then pressed the button on the 4018 got a steady red light, entered the address 9999, cv47 and set CV to 2 as I’m using it for signals, press the button to turn red light off on the 4018 but nothing happens, signals aren’t coming on for me to set them. What am I missing?
cheers Andy
<Annotation 2019-06-23 205339.png>
|
Hi Andrew
Have you set the start address for the 4018?
Chris
toggle quoted message
Show quoted text
On 23/06/2019 19:51, andrew whitaker via Groups.Io wrote: Hi, need help with programming cv47 on a dr4018, I’ve followed the instructions in the manual for using the Z21 app and set up a dummy loco with address 9999, added the F0 function and then pressed the button on the 4018 got a steady red light, entered the address 9999, cv47 and set CV to 2 as I’m using it for signals, press the button to turn red light off on the 4018 but nothing happens, signals aren’t coming on for me to set them. What am I missing?
cheers Andy
_._,_._,_
------------------------------------------------------------------------
开云体育 Links:
|
I will do a video tomorrow morning for you. I have done one on this but maybe a more up to date might be good.? James DCC Train Automation
This is how I program my DR4018s ? From: [email protected] <[email protected]> On Behalf Of andrew whitaker via Groups.Io
Sent: 23 June 2019 19:52
To: [email protected]
Subject: [Digikeijs], JMRI, Rocrail, Itrain, Walthers, Tortise, Cobalt, Switch Machine, Roco, Throttle Dr4018 ? Hi, need help with programming cv47 on a dr4018, I’ve followed the instructions in the manual for using the Z21 app and set up a dummy loco with address 9999, added the F0 function and then pressed the button on the 4018 got a steady red light, entered the address 9999, cv47 and set CV to 2 as I’m using it for signals, press the button to turn red light off on the 4018 but nothing happens, signals aren’t coming on for me to set them. What am I missing?
cheers Andy
-- Many Thanks James Hudson DCC Train Automation
|
This is how I program my DR4018s ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of andrew whitaker via Groups.Io
Sent: 23 June 2019 19:52
To: [email protected]
Subject: [Digikeijs], JMRI, Rocrail, Itrain, Walthers, Tortise, Cobalt, Switch Machine, Roco, Throttle Dr4018 ? Hi, need help with programming cv47 on a dr4018, I’ve followed the instructions in the manual for using the Z21 app and set up a dummy loco with address 9999, added the F0 function and then pressed the button on the 4018 got a steady red light, entered the address 9999, cv47 and set CV to 2 as I’m using it for signals, press the button to turn red light off on the 4018 but nothing happens, signals aren’t coming on for me to set them. What am I missing?
cheers Andy
|
Hi, need help with programming cv47 on a dr4018, I’ve followed the instructions in the manual for using the Z21 app and set up a dummy loco with address 9999, added the F0 function and then pressed the button on the 4018 got a steady red light, entered the address 9999, cv47 and set CV to 2 as I’m using it for signals, press the button to turn red light off on the 4018 but nothing happens, signals aren’t coming on for me to set them. What am I missing?
cheers Andy
|
|
|
New Manuals and Firmware Updates from Digikeijs
Just been informed as of yesterday Digikeijs has new firmware and manuals for some of their products.
Have not looked at these yet.
Dennis
|
|
|
Re: DR5000 with a Lenz LH01 hand controller
|
Re: DR5000 with a Lenz LH01 hand controller
Derek,
Yes, the XN is the XpressNet port for Lenz throttles.??
Ryan
|
DR5000 with a Lenz LH01 hand controller
Hi all,
Before I plug this all together and blow something up,
is the XN + FB port the correct port to plug the LH01 into?
Thanks for any help,
Derek.
|
The next document will explain what you want.?
The first Document was only suppose to clean up the grammar, translation and errors, not to change or add content.
The next document will be in more detail and will be called "Advanced".
It will show how to use JMRI Decoder Pro to make changes easier and faster.
I have 2 examples, both show how to split the DR4018 into 2 and 3 separate functions.
I have made the first draft of this document and sent it to Ryan for feedback last night.
if anyone else wants to help with document content and checking let me know.
Also if you have any specific setups that will help make it better.
Would like to have a few users with input.
Dennis
|
Hi Dennis
Thanks for the sight of the preliminary version.
The section which in my opinion needs more explanation is paras 6 and 7 i.e. how to reprogram the 4018 outputs to operate different types of accessories. I understand how to program with presets, and have successfully done so.
But how does one achieve the first para 6 example of 6 different presets, for example?
Maybe a couple of programming examples with explanatory values?
many thanks
Chris
toggle quoted message
Show quoted text
On 27/05/2019 16:48, [email protected] Notification wrote: Hello,
This email message is a notification to let you know that a file has been uploaded to the Files area of the [email protected] group.
*File:* DR4018-Manual.EN.20190527 (Preliminary).pdf
*Uploaded By:* Dennis Cherry
*Description:*
US Version of the the DR4018 manual. This is a preliminary version and some errors may still need to be found and corrected. If you see anything wrong, missing or needs more information please post it on this website. I will either add it to this manual or to the Advanced manual if it is needed. If nothing needs to be changed within 2 weeks then the (preliminary) will be removed from this manual. Digikeijs has a copy of this manual also. Owner Dennis Cherry
You can access this file at the URL:
/g/Digikeijs/files/Digikeijs%20Products/DR4018,%20DR4101,%20DR4102%20and%20DR4103%20Switch%20Decoders/DR4018-Manual.EN.20190527%20%28Preliminary%29.pdf
Cheers,
The 开云体育 Team
|
Hello,
This email message is a notification to let you know that a file has been uploaded to the Files area of the [email protected]
group.
File: DR4018-Manual.EN.20190527 (Preliminary).pdf
Uploaded By:
Dennis Cherry
Description:
US Version of the the DR4018 manual.
This is a preliminary version and some errors may still need to be found and corrected. If you see anything wrong, missing or needs more information please post it on this website. I will either add it to this manual or to the Advanced manual if it is needed.
If nothing needs to be changed within 2 weeks then the (preliminary) will be removed from this manual.
Digikeijs has a copy of this manual also.
Owner
Dennis Cherry
You can access this file at the URL:
/g/Digikeijs/files/Digikeijs%20Products/DR4018,%20DR4101,%20DR4102%20and%20DR4103%20Switch%20Decoders/DR4018-Manual.EN.20190527%20%28Preliminary%29.pdf
Cheers,
The 开云体育 Team
|
Re: New DR4018 Documents soon.
On 26/05/2019 18:03, Dennis Cherry wrote: There will be 2 new documents available so on the DR4018 .
These documents will be in English only for the US market. Documents will have a USA flag instead of a British flag in the upper right hand corner.
These documents are formatted to US Letter paper size.
The first one is the DR4018 manual with grammar and translation corrections.
Second Document will be a DR4018 Advanced with more detail and all types on information on how to change or reconfigure individual outputs, etc.
Dennis Hi Dennis Thanks for the info. The advanced document will be very welcome - there are some big gaps in the present info in terms of how to program individual outputs. Look forward to seeing it in due course! -- Chris
|
New DR4018 Documents soon.
There will be 2 new documents available so on the DR4018 .
These documents will be in English only for the US market. Documents will have a USA flag instead of a British flag in the upper right hand corner.
These documents are formatted to US Letter paper size.
The first one is the DR4018 manual with grammar and translation corrections.
The second document will be a DR4018 (Advanced) with more detail and all types on information on how to change or reconfigure individual outputs, etc.
The second documents also be using JMRI Decoder Pro for making your changes on the DR4018.
Dennis
|
Iron Planet Hobbies