¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. YaMoRC-Digikeijs
  2. Messages
Expanded Topics Messages Polls
Date
Re: Which version of the YD6016 to sense a 5v-24v signal?

 

So there is 5v on the ES Link?
--
Heath


--
Heath @ Human[c]ity
( )
( )
Re: YD9401 to JMRI

 

Reading comprehension is not my forte.
--
Heath


--
Heath @ Human[c]ity
( )
( )
Locked Re: DR4018 replacement

 

¿ªÔÆÌåÓý

The DR5000 doesn¡¯t support DCC Aspects (aka DCC Ext) which means you will not get all the functionality of the YD8116 until you upgrade to the YD7001. There will be an auto-reverse module but it is in the hands of Karst when that will become available and he is a very busy man currently.

?

From: [email protected] <[email protected]> On Behalf Of Ebenezer Devadarshan
Sent: Thursday, October 5, 2023 2:59 PM
To: [email protected]
Subject: Re: YaMoRC, Digikeijs, JMRI, English DR4018 replacement

?

Thank you Iain,

I have already ordered 2. I have also bought the?YaMoRC YD9401The Wi-Fi/LAN upgrade for Digikeijs DR5000 which might arrive after YD8116.?

Can I use the YD8116 with the DR5000?

Also is there a replacement for reverse loop on YD?

Thank you
Darshan

Re: Tip: Updating software / Firmware on YD7001

 

Karst,

Yes, I did find that, eventually. It is not obvious that it is a button. I just thought it was a picture. It doesn't look like a clickable button.

In general, I like your products and I love the support you provide. But it is often difficult to understand how to use the software. Render things explicit. Instead of saying "Attention, Update only possible with USB connection !", something like: "Update requires USB connection. Click button to change ->" might be a bit more clear. And make the button look like a button. Don't expect that users will mouse over everything to discover what is clickable.


Regards,
Bob Gamble


On Thu, Oct 5, 2023 at 10:17?AM karst.drenth <karst.drenth@...> wrote:
On Thu, Oct 5, 2023 at 04:37 AM, Robert Gamble wrote:
but it was a pain to get the application into a state where the update would work properly

?

See that button USB connector ?? Specially made for People who forgot to switch back to USB before starting the update process...


--

- Bob
Re: YD9401 to JMRI

 

On Wed, Oct 4, 2023 at 07:38 PM, Human[c]ity Junction wrote:
since I only downloaded the software about a month ago

12 days ago we published Build 59. ( Widely commented here that I *should* advertise it here ? ) In there is App 8.2.2 Firmware 8.2.2 for YD7001 and Firmware 1.1.5 for YD9401
Re: YD9401 to JMRI

 

On Wed, Oct 4, 2023 at 03:28 PM, Human[c]ity Junction wrote:
I wonder if I am using the wrong Computer PC software. I will check the version later

?

Just hover over the serial Number...

?

Or...

Look here.

?
Re: Tip: Updating software / Firmware on YD7001

 

On Thu, Oct 5, 2023 at 04:37 AM, Robert Gamble wrote:
but it was a pain to get the application into a state where the update would work properly

?

See that button USB connector ?? Specially made for People who forgot to switch back to USB before starting the update process...
Re: Tip: Updating software / Firmware on YD7001

 

On Wed, Oct 4, 2023 at 04:03 PM, Human[c]ity Junction wrote:
you need to ONLY have the USB connected

Sorry... Bull Shit.? It's not an DR5000 anymore ??

You just NEED an USB connection if you want to fool around with your network settings, since soon you are about to cut the branch on which you are sitting ?

?
Re: Which version of the YD6016 to sense a 5v-24v signal?

 

On Wed, Oct 4, 2023 at 03:25 PM, Human[c]ity Junction wrote:
https://www.iascaled.com/store/CKT-MOTION

The YD6016xx.

?

Like so:?

?

May be an image of text

May be an image of text
Locked Re: DR4018 replacement

 

Thank you Iain,

I have already ordered 2. I have also bought the?YaMoRC YD9401The Wi-Fi/LAN upgrade for Digikeijs DR5000 which might arrive after YD8116.?

Can I use the YD8116 with the DR5000?

Also is there a replacement for reverse loop on YD?

Thank you
Darshan
Locked Re: DR4018 replacement

 

On Thu, Oct 5, 2023 at 05:59 AM, Iain Morrison wrote:
You can do so much more with the YD8116 than you can with what you are using now :)

Except controlling Solenoids. But for that we have an equally well equipped decoder: YD8008? ( can even switch reliable two SEEP in parallel ? )

?

Greets,

Karst
Locked Re: DR4018 replacement

Alastair
 

¿ªÔÆÌåÓý

Hi Iain,

One day, on my next level up, I will be continuing to use iTrain but will be adding in Union Pacific signalling (a restricted set to save me from going even madder). ?
I see that the YD8116 has ready configurations for Dutch, German, Swiss and UK signals.
Will I have much trouble with my ¡®wish¡¯ using iTrain and the YD8116 ?

Thank you.

Cheers,

Alastair

Sent from my mobile device - apologies for any misspelling, misinformation or mistakes

On 5 Oct 2023, at 13:59, Iain Morrison <w.iain.morrison@...> wrote:

?
Absolutely the YD8116 is the DR4018 on steroids. You can do so much more with the YD8116 than you can with what you are using now :)



Many Thanks

Iain Morrison



On Thu, 5 Oct 2023 at 13:36, Ebenezer Devadarshan <darshan@...> wrote:
Hi,

I have used the DR4018 for my 2 colour light signaling system controlled by iTrain. Now that DK is not available, is there a YD unit that can be used instead?

please advise

Regards
Darshan

Locked Re: DR4018 replacement

 

Absolutely the YD8116 is the DR4018 on steroids. You can do so much more with the YD8116 than you can with what you are using now :)



Many Thanks

Iain Morrison



On Thu, 5 Oct 2023 at 13:36, Ebenezer Devadarshan <darshan@...> wrote:
Hi,

I have used the DR4018 for my 2 colour light signaling system controlled by iTrain. Now that DK is not available, is there a YD unit that can be used instead?

please advise

Regards
Darshan

Locked DR4018 replacement

 

Hi,

I have used the DR4018 for my 2 colour light signaling system controlled by iTrain. Now that DK is not available, is there a YD unit that can be used instead?

please advise

Regards
Darshan
Re: Tip: Updating software / Firmware on YD7001

 

Heath, I had to change the connection to USB in the application panel. I wasn't smart enough to just unplug the Ethernet cable. I can't remember if I had to restart it or not, but it was a pain to get the application into a state where the update would work properly.

Regards,
Bob Gamble


On Wed, Oct 4, 2023 at 7:03?PM Human[c]ity Junction <heath@...> wrote:
If anyone finds this, you need to ONLY have the USB connected. Unplug your network cable.
--

Heath @ Human[c]ity


--

- Bob
Re: YD9401 to JMRI

 

I do not know how, since I only downloaded the software about a month ago, but somehow I ended up with an old version of the PC software.

Everything is not updated, Thanks
--

Heath @ Human[c]ity
Re: Tip: Updating software / Firmware on YD7001

 

If anyone finds this, you need to ONLY have the USB connected. Unplug your network cable.
--

Heath @ Human[c]ity
Re: YD9401 to JMRI

 

Karst, if I had any idea what I am doing, I would be dangerous.

My YD7001 says that it has the latest firmware.
Then I went into the YD9401 page and clicked the +SPDIFFS button and hit update. Then is went from 1.1.3 to 1.1.1.

I wonder if I am using the wrong Computer PC software. I will check the version later.
--

Heath @ Human[c]ity
Which version of the YD6016 to sense a 5v-24v signal?

 

I would like to be able to connect some trainspotter motion sensors to my layout to detect whether a train is moving in or out of a section on my layout.
https://www.iascaled.com/store/CKT-MOTION

What version of the YD6016 would I need to use with the Trainspotter Motion?

Thanks
--

Heath @ Human[c]ity
Re: YD9401 to JMRI

 

Don¡¯t know what you are doing Heath but in Build 59 Version 1.1.5 is included.
1001 - 1020 of 4747