¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Odd behaviour connecting a DR5000 (v1.5.5) to a Dell Optiplex PC via USB

 

Hello all, I have an odd situation that maybe somebody has seen before, and has a solution.

?

I have a DR5000 connected to a Dell Optiplex 3020 running Windows 10, version 22H2 via USB.? The PC has eight USB ports, two on the front, and six on the rear. ?Two of the rear ports are USB 3 ports.

?

The DR5000 is running firmware version 1.5.5.

?

If the DR5000 is connected to any of the rear USB ports, Windows flags a message telling me that an unknown device has been connected, citing ¡®Device Descriptor Request Failure¡¯ and the DR5000 doesn't work.? If the DR5000 is connected to one of the front ports, one port displays an identical message, but when plugged into the other port, the DR5000 is recognised and can be controlled from the Digikeijs apps, plus iTrain.

?

I have run USBDeview.exe, which is a clever utility to monitor USB port activity, and it shows all USB devices that have been connected to the PC.? I have deleted the failed connection entries, plugged the DR5000 into one of the rear ports again and get the same message.? If I insert a USB flash drive into the same port that fails with the DR5000, the flash drive appears as expected in Windows Explorer, so my assumption is that the port must be working OK.

?

Has anyone had a similar experience as this?? Does anyone know if the YD9401 chip upgrade might fix this issue? (I have one on order from DCCtrainautomation).? I did consider doing a factory reset on the DR5000, but that is an absolute last resort!

?

Thanks in advance for any guidance!


Re: Questions for Karst: Timeline for YaMoRc systems arriving in US plus user documentation?

 


Re: YaMoRC YD7001 WiThrottle roster

 

One request to you, can you send me your JMRI Roster export ? (XML)

?

Greets,
Karst


Re: YaMoRC YD7001 WiThrottle roster

 

Karst,

That is fantastic, looking forward to having the roster in a later upgrade.

Thanks

Brian


Re: YaMoRC YD7001 WiThrottle roster

 

Thnx,

?

I noticed the Roster tab in WiThrottle, had no clue what it was used for :) ( since you can't edit on that tab )

?

But... now that I know:

?

?

Just need to create a Loco Database, which was in planning anyway :)

And importing an xml from JMRI is the least of problems. :)

?

So it may be expected in an upcoming update.

?

Greets,

Karst


Re: YaMoRC YD7001 WiThrottle roster

 

Iain,

Yes it does but you can also have the roster in the WiThrottle server which in this case is the YD7001. The point of having WiThrottle in the YD7001 is that you don¡¯t need an interface to JMRI.

WiFiTrax which makes an NCE interface and also WiFi interfaces for locos, incorporates the roster within the WiFiTrax modules. Including the function descriptions. WiFiTrax includes the ability to load the roster from a JMRI xml loco export.

It is a nice to have feature.

Cheers Brian


Re: YaMoRC YD7001 WiThrottle roster

 

¿ªÔÆÌåÓý

Doesn¡¯t WIThrottle get it¡¯s Roster information from JMRI, therefore I would have thpught you need to connect to JMRI if you want the Roster?

?

From: [email protected] <[email protected]> On Behalf Of Brian A
Sent: Sunday, July 23, 2023 8:09 PM
To: [email protected]
Subject: Re: YaMoRC, Digikeijs, JMRI, English YaMoRC YD7001 WiThrottle roster

?

Karst,

I use WiThrottle on iPad and iPhone as well as Engine Driver on Android devices. I also have a friend who uses a TCS UWT-50 on my railway.?


cheers Brian


Re: YaMoRC YD7001 WiThrottle roster

 

Karst,

I use WiThrottle on iPad and iPhone as well as Engine Driver on Android devices. I also have a friend who uses a TCS UWT-50 on my railway.?


cheers Brian


Re: YaMoRC YD7001 WiThrottle roster

 

Which Throttle do you use ?


YaMoRC YD7001 WiThrottle roster

 

Just installed the YD9401 and created my YD7001, it¡¯s great to have native WiThrottle support, but I am missing my roster. Is there an ability to import a roster from JMRI or an ability to create a roster?

I was also impressed that the WiThrottle and Z21 app throttles were in sync.

cheers Brian


Re: DR5000 Downgrade to 1.5.5

 

Nope, no problem. You just can install over 1.6.3


Re: Differences between YD8008 and YD8044

 

¿ªÔÆÌåÓý

The differences are shown very clearly in the detailed descriptions

?

?

?

From: [email protected] <[email protected]> On Behalf Of x50
Sent: Sunday, July 23, 2023 1:36 AM
To: [email protected]
Subject: YaMoRC, Digikeijs, JMRI, English Differences between YD8008 and YD8044

?

What are the main differences between these two switch decoders??


Differences between YD8008 and YD8044

x50
 

What are the main differences between these two switch decoders??


Re: DR5000 Downgrade to 1.5.5

 

I'll be upgrading with the YD9401 as soon as Ryan can get it to me. Will it matter that I am running V1.6.3 or should I downgrade?

Bob


Programming track with YaMoRC 7100?

Rick Norell
 

Looking forward to learning more about the YaMoRC command station!? It appears that one must purchase the 7100 and 7101 if one desires a programming track connected to the command station.? Why no programming track with the 7100 alone?


Re: 4088LN permanently detects Lodi auto reverse module

 

Hi James,

Off topic so I hope I don't get moderated but do you know when the yamorc wifi modules will be back in stock with yourself.

Regards,

John


Re: 4088LN permanently detects Lodi auto reverse module

 

Dip switches.

John


Re: DR5000 Downgrade to 1.5.5

 


--l did not know that. I will need to check what version I am running. I have not had any issues with the version I am using. Thanks?
Mike's Deep Run RR
Virginia USA

DR5000 command station
DR4024 servo switchers
DR4088LN-CS DR4088CS
DR5013 reverse loop
DR5033 boosters
JMRI and USB loconet connection


Re: 4088LN permanently detects Lodi auto reverse module

 
Edited

James, I am hoping that is all he did - Karst had also suggested shunt resistors hence asking which solved the issue

Iain

On Fri, 21 Jul 2023 at 11:01, James <James@...> wrote:

I am guessing he set the dip switches as you suggested.

?

?



James Hudson

Director

?

01823 429309

Unit 15, Bowdens Farm, Hambridge, Somerset, TA10 0BP

This email and any files transmitted?with it are confidential and intended?solely for the use of the individual or?entity to whom they are addressed.?This message contains confidential?information and is intended only for?the individual named. If you are not?the named addressee you should not?disseminate, distribute or copy this e-mail. Please notify the sender?immediately by e-mail if you have?received this e-mail by mistake and?delete this e-mail from your system. If?you are not the intended recipient you?are notified that disclosing, copying,?distributing or taking any action in?reliance on the contents of this?information is strictly prohibited.

?

?

?

From: [email protected] <[email protected]> On Behalf Of Iain Morrison via
Sent: Friday, July 21, 2023 11:00 AM
To: [email protected]
Subject: Re: YaMoRC, Digikeijs, JMRI, English 4088LN permanently detects Lodi auto reverse module

?

John

?

What did you do to sort it?

?

On Fri, 21 Jul 2023 at 10:59, j.pollard4 via <j.pollard4=[email protected]> wrote:

Fixed!!? All now working well.? Thanks to you both for your help and advice.

Regards,

John

--


Many Thanks

Iain Morrison

--

Many Thanks

Iain Morrison


Re: 4088LN permanently detects Lodi auto reverse module

 
Edited

¿ªÔÆÌåÓý

I am guessing he set the dip switches as you suggested.

?

?



James Hudson

Director

?

01823 429309

Unit 15, Bowdens Farm, Hambridge, Somerset, TA10 0BP

This email and any files transmitted?with it are confidential and intended?solely for the use of the individual or?entity to whom they are addressed.?This message contains confidential?information and is intended only for?the individual named. If you are not?the named addressee you should not?disseminate, distribute or copy this e-mail. Please notify the sender?immediately by e-mail if you have?received this e-mail by mistake and?delete this e-mail from your system. If?you are not the intended recipient you?are notified that disclosing, copying,?distributing or taking any action in?reliance on the contents of this?information is strictly prohibited.

?

?

?

From: [email protected] <[email protected]> On Behalf Of Iain Morrison via groups.io
Sent: Friday, July 21, 2023 11:00 AM
To: [email protected]
Subject: Re: YaMoRC, Digikeijs, JMRI, English 4088LN permanently detects Lodi auto reverse module

?

John

?

What did you do to sort it?

?

On Fri, 21 Jul 2023 at 10:59, j.pollard4 via <j.pollard4=[email protected]> wrote:

Fixed!!? All now working well.? Thanks to you both for your help and advice.

Regards,

John

--


Many Thanks

Iain Morrison