开云体育

I upgraded my Digikeijs 5000 to the Yamorc 7001.? I connected all my Rocos to the upgraded command station.? Have been running trains with the different throttles all week.? Today I had 7 operators

Thanks Iain.

Yes, no problem – DCC equipment will work with a DR5000. Sent: Thursday, September 14, 2023 8:58 AM To: [email protected] Subject: YaMoRC, Digikeijs, JMRI, English YaMoRC YD8116 and Digikeijs

I am considering buying some MTB MP5 point motors and using the YD8116 to switch them and before I do just want to know whether the YD8116 will work with an unconverted DR5000. Sorry if this is a daft

Hi ****? This is a repost of a topic I opened on the YaMoRC forum by mistake.? Sorry for the duplication for some of you. **** On the YD7001 we have discovered that in our environment F2 is

?50 each incl p&p

Alan, how much do you want for these modules please? -- Dave, Portland

Hi Dennis EU59826 LokPilot 5 Micro - 6-pin w/wires. Have two do the same. Andrew.

You did not mention what decoders? If that have sound, try muting the sound first. On Tue, Sep 12, 2023 at 8:54 PM, andrew_pink58@...<andrew_pink58@...> wrote: Hi I am having

Hi I am having some issues with programming locomotive with long address. First if I use JMRI Decoder Pro I get a message can not communicate with the command station ,ps I changed the USB Cable.no

Jay, Thanks for all the testing/information/tips you are providing. It has helped with my setup. I have a large garden railway, O Gauge, that I use the YD7001 as the controller. I run the Z21

It has been a while since I reported on our progress.? We have had a number of items we had to overcome to connect more throttles. We did manage to get our two WLANmaus throttles to connect to the

Ryan: I have read about adding resistors to the DR4088 to desensitize the device but never understood how this was to be accomplished until I saw your photos. Awesome, thanks!!! Just to help me

i have 3 more dr4088lncs for sale Please email if interested Thanks Alan

Weird, sorry to say. In a way there seems to be an Hate/Love relation between RocRail and LocoNet. One of my alpha-testers runs RocRail.? Guess with what... LocoNet Binary on LAN

Welcome :) The comparison by itself is ok, no problem. But we had a lot of not so nice emails, phone calls and even "visits" of people thinking/assuming YaMoRC is "Just Another VERSION of Digikeijs"

Issue has been resolved and it appears to be part of the Loconet buffering in RocRail.? I changed things ove to LbServer and it all works again as before. Thanks for all the help. Thomas

Karst, Thanks for the information, looks like I need one more current sensing version, so it will be nice not to need to add the resistors. And while I get why you are correcting people, I was using

Hi, since the YD6016xx-CS modules are *NOT* just a Version. In fact other than being current sensing feedback unit, they have nothing to do with eachother… ? to your question: the YD6016xx-CS

Does the YaMoRC version of the DR4088CS, the YD6016ES-CS ( http://yamorc.de/products/?singleproduct=1242 ) , solve the issue of needing to add the 500 ohm resistors between the output and common, or