Karst, thank you for the latest manual!? If I purchase, I will be a very basic user.? I have no legacy dcc equipment to consider.? I want walk around locomotive control using wifi and basic DCC? functions (stop, go, forward, reverse, consisting, and sound).? Turnouts are manual control with ground throws.? Should be easy with your system!? A quick start writeup would be fabulous with detailed explanations for novices like me!
?
Going through the manual, I believe I would need to make entries in the following sections:
? ? Lan? Basic settings??? (specify DHCP)
? ? ES link settings? ?NA, no modules
? ? Loconet sections? ?NA, no digitrax components
? ??Track out DCC properties track? (turn off railcom, accept defaults for remaining entries)
? ? Track out DCC properties locomotives (highest short address 99, speed levels ALL)
? ? Track out DCC slots NA no loconet
? ? Track out DCC switches?? NA? (use manual switches)
? ? XBus/RBus settings? NA
? ? BBus properties?? accept defaults???
? ? RB-Bus settings? NA??
? ? Program track CV programming? (both program track and POM, program decoders)
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? redundant to program decoders on JMRI, Z21 and YD7010??
? ? Program track test drives (displayed on cell phone, commercial throttles?)
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?dispatch only used for certain hand held controllers or all?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?which hand hold controllers do not have direct selection of locos?
? ?Program track settings? ? ? ?use defaults?? what do users say?? 750mA seems too high
? ?Wifi basic settings? ?use defaults
? ?Wifi expert settings? ????? unsure if a novice should make entries here
? ?USB update? ? use defaults?
? ?Track go/stop control? ? ?connection via home network, enter IP of my router, language english, no control panel
? ?Track go/stop settings? ? use default settings, should I care about loconet slots?? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ??
? ?Infrared properties? ? ? NA
?
Did I select the right items for entry and appropriate values?
Any documentation on how to access Z21 and JMRI through the YD7010?
?
Thank you!
Rick
