开云体育

Iain,

Should I just add a 500 ohm resistor to every output as a precaution against issues.

What wattage resistor should I use? [edit: I just found the photos from Ryan showing a .5 watt resistor at 470 ohm. So I will start there with a similar setup and see how it goes.]

Aside, I am planning to add a MQTT Relay to each output of the DR4088 to control the track power for each output. I am very. curious whether this is going to mess up the detection. I am planning to use these,

Thanks

--
Heath

--
Heath @ Human[c]ity
( )
( )