开云体育

I have a new factory 912 mount for the H model if interested, make offer, I am in the USA, John

gally_355@... [X-Air_Ultralight_Aircraft] wrote on 14/05/2017 8:44 PM:

Hi John Good luck, in my opinion, for what it's worth, it seems that if you can find an a/c of your type in Europe (pref Germany) that has been tested / certified by their national authority you

Here ya go if you can see them clear enough cheers Pete

Hi Jon, In Australia my X-Air MTOW is 490kg my aircraft empty weight is 260kg I actually purchased a 912 I wanted to install in it rather than the 582... not sure yet as it seems hard to get a

Looking back a few years when I owned one of the three UK Falcon 912’s, the weight and balance sheet indicates a measured empty weight of 264.5kg and a max zero fuel weight of 266.5. If you are not

Dear all, I’m toying with fitting a Ballistic Parachute ( BRS ) in my UK registered X’air Falcon 912 ( X’air F to most of the world ) How is this fitted? Externally or internally.

The guys at Wingtech do a really good job, no complaints from customers that i have heard of. $4,500 AUD for complete set Geoff and Barb Gartshore gbgartshore@... [X-Air_Ultralight_Aircraft]

To group: i would appreciate hearing what others experiences have been in changing fabric for the X Air H. Specifically, what distributor did you use, and how did that turn out in terms of cost,

How much for the pod? Can you send photos please?

Ok, Thanks John, I am 4 hours away, let me see if I can get away for a day, I'll be in touch. On Sat, Mar 18, 2017 at 6:18 PM John palmettoe@... [X-Air_Ultralight_Aircraft]

Georgetown, SC

Where are you located John. On Sat, Mar 18, 2017 at 4:51 PM John palmettoe@... [X-Air_Ultralight_Aircraft] <X-Air_Ultralight_Aircraft@...> wrote: -- Philip Hiatt

200 dollars, you pick up

How much for the used h model fuel tank On Mar 18, 2017 11:14 AM, "John palmettoe@... [X-Air_Ultralight_Aircraft]" <X-Air_Ultralight_Aircraft@...> wrote:

1 new and 1 used

New white standard or F model pod, H model nose wheel pants and lower cowls available, no shipping. 843 240 8450

Thanks for the help. McMaster Carr had everything I needed except for drilled hardware, but I can do some drilling. Trent

Try AlbanyCountyFasteners.com. They have an amazing selection

Try McMaster-Carr. That's where I usually go as they have a pretty good selection of metric hardware. https://www.mcmaster.com https://www.mcmaster.com/#