开云体育

The caution is to make sure any planned structural changes are reviewed with the manufacturer - just because one can doesn’t necessarily mean one should ….. Geoff Gartshore Zenith CH200 GCUD

Just make a slight bend in a component, while taking in account the additional change once the suspension is ore loaded come time to land ________________________________ Sent: Tuesday, March 8, 2022

Hi Are the bungees wrapped 9 times on both sites? ----- Upprunalegt skeyti ----- Frá: mcressman via groups.io <mcressman@...> Til: [email protected] Sent: Tue, 08 Mar 2022 16:04:19 -0000

I'm probably foing to have to.? There is no adjustment and I cannot find anything that appears to be bent.

Can't you simply Bend something like the left axle forward towards the propeller to compensate for the towel? Or bend the axle towards the front propeller? Something is obviously not at zero degrees

I am having an issue with a toe out situation on the left wheel.? I have replaced bungees with factory originals and axle assemblies on both sides but the problem still exists.? Any ideas?

Good day everyone, Has anyone installed bubble doors on their X Air? If so, what was the increase in cabin width from the original 43 inches? Did any parts from the original OEM door? that was able

cruise is 70 knots IAS & fuel consumption is around 14 litres per hour ________________________________ Sent: February 22, 2022 8:24 AM To: [email protected] <[email protected]> Subject: Re: [XAIR] New

Hi Justin, what do you get for a cruise and consumption?

Hello Brian, I agree with you that the engine of choice is most certainly the Rotax 912 80 hp. It runs rings around the Jabiru in terms of takeoff distance, climb performance and fuel economy. The

Should read 912 and Kiev prop

This is what I am using on my hanuman/ jabiru2200

Hi I have been using the Sensenic ground adjusable prop for 10 years for my jabiru engine. To be able to adjust the the pitch is a high +. There ís no need to change engine to Rotax 912 due to

My Sensenich ground adjustable prop on my X Air Hanuman jabiru 2200 works beautifully. Easy to adjust and accurate in RPM change. ________________________________ Sent: Monday, February 21, 2022

As a Hawk owner of over 10 years the only power plant / prob that in my opinion after hours of research is the Rotax 912 driving a 3 blade Kiev prop.

Unfortunately with the current political situation be almost impossible to get anything out of Ukraine Richard Stubbs wrote on 21/02/2022 5:41 pm:

Micahel, Per the US distributor when I asked, " The Bolly Jabiru propeller is only for use on the 3300 engine. The 2200 cc 4-cylinder engine can only use a wood propeller because of the very violent

Hi there In terms of other propeller supplier’s a lot of folk here in SA have opted for the wooden http://www.p-propeller.co.za/ with leading edge protection for their Jabiru aircraft. I personally

The Ivo prob is loud and not really efficient.? We have Jabirus at the airport with Bolly Props ?? kymidnight@... wrote on 21/02/2022 5:28 pm:

So far, I have found only a few options for the Jabiru 2200 powered x-air for a propeller. Prices are USD and as of Feb 2022. Sensenich makes a ground adjustable model and a wooden prop. Adjustable is