Re: X-Air Ultralight Aircraft Hanuman suspension bungee replacement
|
?
Steve did you ever look at bungee loops, They are fitted
to my old Dragon and used on Cubs etc LAS has a range.
?
Seamus
?
----- Original Message -----
Sent: Monday, November 03, 2014 8:41
AM
Subject: Re: X-Air Ultralight Aircraft
Hanuman suspension bungee replacement
?
?
I had a similar experiance with my Xair 'H'.
The? original kit bungees did take a lot of effort to install.? I
did get the 9 strands on but had to pull so much that?they were at their
elastic limit, not leaving any left for actual suspension flex certainly not
the 2" plus required.
?
When I came to replacing them?I experimented
with different?bungee diameters, 12mm
looked promising but had trouble getting them in the space behind the nylon
washer, I inserted longer bolts but they bent. I went back to the 10mm and
found that less that 9 strands was to soft, 9 strands bought me back
to?the elastic limit. Thats how I left it, not very satisfactory but at
least I don't now rock and roll taxying.
?
Steve
?
----- Original Message -----
Sent: Sunday, November 02, 2014 4:37
PM
Subject: X-Air Ultralight Aircraft
Hanuman suspension bungee replacement
?
After flying my Hanuman for 6 years, I decided to replace the
bungees on the suspension with new bungees from RandKar. I bought these
bungees a few years ago and have stored them inside my house.
The manual calls for 4.5 revolutions or 9 strands in the center of
the loops. I have been unable to stretch the bungees more than 3.5
revolutions (7 strands) and it was very difficult to get that far. I must be
a weakling but is there a trick to getting them stretched to 9 strands? Even
with 7 strands, the bungees are tighter than the 9 strands that I
removed.
Advice? Thanks in advance. Superhuman strength is not
available...
John
|
