Hello All,
I recently acquired a used X5105., and so far have been unable to switch on and access any functions.
-It will not switch on , no normal power up with or without external DC supply.
-No response to hold Menu and On button.
- I have been able to access the firmware update XG Bootloader mode by pressing both up/down buttons and on button, and seems I have successfully uploaded latest 3.0 firmware.
However once loaded it does not go back to charge/standby mode as expected.
This is the only action where I have seen the screen light up.
Strangely accessing the bootloader is only possible with the internal battery, and does not work when an external dc supply is connected?
I have checked the battery charge level directly all seems OK.
So any suggestions about a possible remedy would be much appreciated!
Thanks in advance!
73
Steve
W8SAW/G4DFN
STEPHEN WIDDETT