开云体育

Thank you Miller! I am storing away this information for future reference. I was finally fortunate enough to find someone with an assembly for sale, and knowledge of how everything in the assembly

You are welcome !!! Glad to help !!! Paul LeTarte Retired Gentleman of Leisure

Thank you so much! I did a total rehab of my WW D9 and was never sure if I put the little wire/spring in the tread take up back together correctly. It sews beautifully so I assumed that I did. I

Hello Miller, If you remember or still have the series of pictures I sent to you from Paul LeTarte regarding the threading of a 9W machine? They could be very helpful in answering Caroline's question

Note that Caroline is asking about the thread controller, not the tension. The purpose of the thread controller is to prevent the thread from dropping below the needle as the take-up comes down faster

Hello again, ? At the 1 minute and 36 second point in this video link the operator is turning it by hand and it can be seen the tension discs spreading as the presser is lifted up for finishing a

Hi Caroline, ? Welcome!? I own a D9 and like it very much but don't have a W9 so uncertain the differences in the upper tension assembly if there are any or not.? There are two really videos on

Edit... That is my 13 yr old daughter. She has taken to Sewing like a fish to water and I'm happy she's not 23 yet!! [email protected]> wrote:

Thank your for accepting me into the group! I recently purchased a Singer 9W (serial W71034) in a 5 drawer Treadle and an in the process of getting it up and running. It stitched but was having

Welcome, Shalyn!? I can't offer any advice, as I've never worked on mine, but there are many here who can!? I bought my machine in mint condition from the previous owner, already up and running.?

Greetings all. I joined up to make sure I could keep my D9 running smooth.? Picked it up at an estate sale some years ago for $32.50.? Didn't know how good a machine it was at the time.? I had been

No Cheri, I haven't found one yet. Nor do I know of a work around option. My guess is one probably could be made with a 3D printer. I'd give it a try if I have one in hand to measure and draft up for

Hello All, So happy to have found this group. I just did a complete refurbishing of a WW D9 machine and treadle table that was gifted to me. I love it and it is beautiful. I came with various

Becky, Hello, I am new. From Miami Florida. Any luck finding the foot adapter for the W9? I too would love to get my hands on one. The adapter is described in detail in this video “Adapting a

Hi Amelia, My wife and I are in Sydney and have 3 W&W's a No.1, a No.8 and a No.9 along with something like 30 other machines. Don't particularly fancy your chances on finding a bobbin holder, though

Hi Janice; Yes, we are still active, Several years ago we changed for Yahoo to Groups IO, our older reference may still be for the YaHoo group. Here is a link to the IO group;

Welcome Amelia, ? I wonder if anyone has considered machining a decent sized lot of bobbins for others to purchase for their machines as primary or spare bobbins??? Best regards,Mike

Hi All! Thanks to Dean and Miller for the warm welcome, and to Janice for making contact with the group on my behalf. I’m Amelia and I live in the Macedon Ranges in Victoria, Australia (right near

I want to share this group with someone looking for parts for her Model 8 machine. Janice D. Green www.JaniceDGreen.com<http://www.janicedgreen.com/> God's Word is sweeter than honey from the comb.

As far as I know it is. Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 ________________________________ Sent: Thursday, March 12, 2020 8:38:41 PM To: