开云体育

I wrote: I should have said, "elbow grease, steel wool, and sewing machine oil". I would never simply use the steel wool dry, as I implied before. paul =---------------------- paul fox,

Hi Sam -- welcome! Tammy's given you some excellent answers. I'll just add that I tend to attack dried whale oil with elbow grease and steel wool, which works well, but you do need to have things

Welcome Sam, congratulations on your new machine it should clean up beautifully. None of my W&W machines appeared to have been lubricated with whale oil, or at least had been oiled with SM oil long

A great looking machine. I do not believe you will find "whale oil" anymore. I use common mineral oil but some prefer a "sewing machine oil." The Wheeler & Wilson Facebook page has had notices for

Hi There! I just brought home my first Wheeler & Wilson! Its a No.8 in a treadle base. The machine looks like it has not been abused (no scratches, glass foot still intact), but it was stored in a

Got it. Small screws are available. I bougth some this to replace one I had to drill out on my last rehab. Thanks for the drawing. -- Bill Wells ronone69@...

Hi Bill, I guest what I call "index screw" is indeed the "needle position screw" that sits on the flat part of the needle shank, forcing the needle to be properly positioned. Not sure where to find a

Thank? you for running this experiment.? I too thought about the same thing in the past but did not have a needle bar to try it on. When you mentioned grinding the "needle position screw" (P/N

I found an old post on quiltingboard.com (https://www.quiltingboard.com/7058873-post17.html) talking about modifying the needle bar in order to accommodate 15x1 needles. I have been successful using

Thanks for adding me!? I see a number of familiar folks here, so forgive me if some of this stuff is redundant to some of you! My question involves a #3, but would probably apply to any of the pre-#8

Thanks Tammy. I’ll take a look. And, yes. Patience. Laurel

I’ll resend Jeannie. Please do check your spam or junk mail folder. John

Ken, sorry to be a bother but I bet it went to spam and I deleted it. ?Would you please resend?

PM is referring to either private or personal message and should come via email. Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 Sent: Monday, May 31, 2021 8:02 AM To:

Thanks John! ?Where do I look for that PM? Best, ?Jeannie

Hi Jeannie - I have a spare needle clamp with screw. ?Sent you a PM. Regards, John

I recently acquired a Singer 9W I plan to restore.? I notice it is missing the needle thumb screw.? Is there a particular one I need to find for this machine? Here is a picture on Flickr . (

Welcome, Sounds like you have a couple of fun projects. Locating bobbins and feet is going to take some persistence. I don't have a 12, though I would like to have one. I was lucky and my two 9s came

Hi, I'm new here and have a 12W & 9 I was given along with a number of other machines and loose parts. Right now, I'm very interested in getting the 12W up and running.? Any help with locating

Thank you. Nice work on the comparisons. Notification <[email protected]> wrote: -- Bill Wells ronone69@...