开云体育

Hi all, I have been with the group for about a year now and read a lot about the W650 on this forum and elsewhere. I thought of waiting until retirement (4-5 years) to get one but now, after 2 years

Actually, I'm as ignorant about suspension are you, and blindly make changes as suggested by others, and am by no means suspension tech savvy. I'd say if it feels fine, go with that. Dennis

Thank you, Dennis! It says Wheel travel, that must be the same thing as fork travel! Never noticed, I was looking under the Suspension chapter. So at 50mm sag, I'm at 38.5% of full travel on the

Ruari Manual sez 130mm - 5 1/8" front fork travel. Dennis

Rob See this for proper master link assembly; http://www.msgroup.org/forums/mtt/topic.asp?TOPIC_ID=383 Get a DID X-Ring chain, they're the best and will last the longest. Make sure the master link

OK, I called Dave Quinn re the rear shocks and found that the travel on the Hagon 33007s is 3.2", so total sag of 27 mm is actually 33% of that, bang on the money! (or close enough) But, I cannot

I got a flyer about this site from the AMA. I've never seen it before, so don't know if it's news to anyone else. Lots of motorcycles for sale. Free listings. www.motorcyclejunk.com gene in

1. if the teeth are hooked i.e. very worn on the pointy bit.. best to replace.If the sprockets are symmetrical the tight spot on your chain is probably either siezure of that part of the linkage or

The one with a trouser leg rolled up?? Roy.

Should've stayed in bed. LOL Anita Gene Fitch <cafeboy@...> wrote: LOL! You understand I'm laughing WITH you, not AT you. ;-> Happy 5th Keith.

Don't know about the RoadRiders. They are a new tyre since the UK company got bought out. Let us know how they fare!

I use DID 'X' ring. It has rubber seals to keep crap out of the joints, only needs a light oiling to keep nice, doesn't stretch, and doesn't therefore hook the sprockets or need adjustment. It's

.not part of the tool kit. You need to buy one. Larry Botheras Essex UK W650 Wrench 2007 Moto Guzzi Norge 1977 KH400 1978 CD175 1994 Ural Solo From:

Thanks again to all the inputs on this. I'm pleased to report that with a new front tyre, that matches the new rear, the shimmy has gone! For the record, I've fitted Avon Roadriders, and even on a

LOL! You understand I'm laughing WITH you, not AT you. ;-> Happy 5th Keith. Hope it goes better today. How was the lunch special? gene in OR

Thanks for that info. Now, I wonder where the hex driver from the tool kit has gone? I've never opened it until now, so maybe the previous owner(s) kept hold of it. Bugger. <martin.taylor@...>

Thanks Martin & Dennis. That's much easier. I've clearly never tried a master link chain - anything different about them in use? (e.g. lifetime, lube/clean, etc). What should I look for on the

one of scotlands finest (retired } can always get a MOT wrote: I enclosed when score to

Vernon, I went to Craigslist - Los Angeles - Motorcycles, then entered W650. I do not know how to do a national Craiglslist search. Kirk jv_roberts2000 <jv_roberts2000@...> wrote: