Yes please ADHOOM?post pics of the inserts. I have pods on my W and have drawn a child's cotton sock over the pods, sprayed with light can oil to improve filtering. You may have to shim the carb needle and put in a slightly larger pilot and main jet in each carb. I have Posh aftermarket exhausts and pods, and the carb had to be enriched due to the more effortless flow, which leaned the standard carb mix.
Den s?n. 6. nov. 2022 kl. 13.26 skrev ADHDOOM <
adhdoom@...>:
Hi peeps,
Got a couple of quick questions/requests that I'm hoping someone on here has the technical knowledge/effort to spare to answer for me:
Firstly does the throttle sensor adjust the timing when the bike is in use or is it just there to facilitate the function of the kickstand safety feature? I know that when the kickstand is still down and you drive to rev it kills the power so obviously the throttle sensor is involved in this feature but does it actually do anything else? If the kickstand safety feature was removed along with any associated elements could the throttle sensor then also be removed? I've played round with bikes that have CDI ignition systems like this before and none of the earlier bikes I've messed with have had or needed a throttle sensor so I am curious to know if the kickstand safety kill is all that it is there for.
Secondly would someone be able to post me a pic of the underside of the carbs? I had my float bowls off and was about to start putting them back on and have found a fifth slightly longer screw that I am not sure actually came off of the carb or is simply one that was left on my bench when I started.
Also I am in the process of fitting pod filters to the standard CV carbs and am trying a custom trick of making some short aluminum tube inserts to sit inside the pod filter that reduce ever so slightly to create a restriction and therefore maintain the constant velocity required to keep these carbs working as they should. If anyone's interested I'll post up pics of my custom inserts and of the results of how it runs etc... and before anyone says why am I putting pod filters on and to just leave the standard air box it's because I am going to start modifying the frame so there is no room for the standard airbox.
Thanks in advance!
