开云体育

Yes, I understand that, and noted it in my question, but how is that different to the the iGate not being there in the first place?

Funny how all the east coast folks use 30M. When every one out west uses 40M.

I designed the new APRSdroid versions to specifically allow VARA usage without flooding the network. As you can disable acks, or simply reduce the number sent in a short time to duplicate messages

Let me start by squashing a few things. WA8LMF is not correct here when it comes to VARA APRS. *On VHF APRS he's very correct in saying that receive only IGates break the system, because in reality it

Yep, internet and RF don't mix well together sometimes.? It's a problem with conventional packet networks too.? Node-lists containing almost literally 1000 nodes due to AXIP links and cavalier

Messages DO

How do they clog the RF channel if they're not transmitting? As you say, not they do not send an acknowledgement, but how is this any different to there not being a station there? I may, of course, be

I’ve hit both of your Igates from MO, at times. Predawn. -K0ION Sent: Tuesday, December 31, 2024 11:20 PM To: [email protected] Subject: Re: [VARA-MODEM] Switch to New 30M APRS-over-VARA Channel.

1)?? RECEIVE-ONLY igates are an active DIS-SERVICE to APRS. They break half the functionality of APRS and clutter the RF channel,? by not allowing APRS messaging with another station to work.?

Hi Devin, I am trying NVIS 40m dipole. Could you share which antenna you are using? Is that mountable to hitch receiver of SUV? 73, Gary W5FFF

FT8 works but in VARA HF I cannot receive, have been through setting dsp, notch and contur off , new radio to me any help appreciated

Yes, I have dedicated 24/7 igates for 40M [-10] and 30M [-11], but 30M is receive only. KF6NYM

I think I have this setup correctly.? will wait for some traffic to see. Radio - QDX (with damaged tx mode) Antenna - Wire dipole at 40ft, inverted vee configuration JS8 call used to CAT control the

I would like to setup a rx igate on the east coast.? I have a broken QDX with RX only and an RTL-SDR dongle available for this purpose.? Which is easier to get going and what software do I need??

VARA and APRS via 30m. My gated signal results from NorCent Missouri. 30W into attic antenna.

As of 0000 Hrs UTC 1 January, the WA8LMF APRS-over-VARA igate and webserver has moved from the old APRS-over-VARA channel (10.147.60 MHz USB) to the new channel at "dial frequency" of *_10.148.200 MHz

Mike, email me your number. I'm in Florence, Lloyd KO4L Lmitchell at gmail dot com

So, you are using the wrong connector. You need to connect to the "data" connector on the back of the transceiver body, not the control head. Also, the "speaker" level on the Windows mixer is your

I don't think? you have the radio connected at all.... Pic number 2 shows a "Microphone" input. ? You should be showing the DigiRig as

Ya give it a shot a see what happens. More full time Igates is the key too.