开云体育

Hi IM is so low, even music is clear. Firmware coming out soon. /g/QRPLabs/message/131647 73 DE muhsin, TA1MHS

The PinPoint website seems to be missing in action.??? I've put a copy of the most recent PinPoint on MY web site at at: <http://wa8lmf.net/hamdisks/Pinpoint_v2.1_build_240324.msi>

Rick - KJ7ROX via groups.io <rick.lovdahl@...> wrote: Looks like their webserver is misconfigured. You could try to get what you want via the webarchive site:

WIDEn-N paths are NOT used on HF!??? I have been several new users running PinPoint without changing this factory default. Digipeaters are heavily discouraged on HF since they double the time your

Started using AMTOR and PACTOR more than 30 years ago. Today I'm using VARA with Winlink and VarAC. Fortunately I downloaded PinPoint some time ago. My first 30m beacon was received by GM4HYG-10:

Thought I might give this a go. Having the same results with trying to download pinpoint ( You don't have permission to access this resource.). Guess I will try again in a few days. -- Darcy VE6DDD

Hmm?? The PinPoint website seems to be missing in action.??? I've put a copy of the most recent PinPoint on MY web site at at: <http://wa8lmf.net/hamdisks/Pinpoint_v2.1_build_240324.msi>

1)??? Have you enabled the KISS mode in *VARA*????? WinLink and VarAC Chat use the "Command" and "Data" ports in VARA.?? APRS uses the "KISS" ports instead. 2)??? Have you selected?

Basically, you enable the KISS mode in VARA's "Settings", "VARA Setup".? Then in an APRS application's setup choose "KISS-over-TCP/IP" in the app's TNC configuration page. If the APRS client doesn't

Can't get VARA to trigger the PTT of my Kenwood TS-890.... No matter what I do. It works fine in winlink but can't get it to function when connected to Pinpoint.

I read your post and then tried to access the pinpoint aprs website and it seems to be down. (Forbidden message). Am I missing something? Here is the url I am attempting: https://www.pinpointaprs.com/

Hello everyone. Been researching how to set up APRS through VARA and I cannot find in YouTube or the search how to do a detail setup to make it operational. I am set up for Winlink VARA HF & FM on our

Unlike other "soundcard apps" like WSJT, mmSSTV, FLdigi, etc, VARA *_DOES NOT_*? control your radio. ?VARA is just a soundcard audio modem. It's the application being used with VARA (WinLink, VarAC

Hello all - I cannot get VARA HF to trigger my rig’s transmitter. The 5000 is not listed on the Radio drop down on the Vara HF Winlink Session window. I tried several Yaesu rigs to see if that would

For the record the radio dial frequency is 10.148.200 for both CW mode (USB) and DATA mode (USB) and filters are all in default. No change in VAFA settings either. Thanks for the explanation.. 73 de

On most radios, the main difference between "USB" and "DATA-U" is that the audio input/output is from the front panel on USB and a rear-panel "data port" on "DATA-U".?? The receive tuning shouldn't

Hmmm. In USB-Data mode I can key the radio using DTR on COM3 but I see in Pinpoint: WA8LMF-6>APU25N:>150213zThis is the new APRS-over-VARA Channel beginning 1 Jan

1)?? Forget all the CAT nonsense and hassle -- set the radio on *10.148.200 USB* or "DATA-U" if it has that mode manually. 2)?? Set the passband or DSP bandwidth tuning of the radio to allow the

I'm listening. Trying to figure out how to get pinpoint 2.1, Vara and my FTdx-3000 to talk. 73 de K3FZT / Steve -- Steve Davidson K3FZT | GMRS: WRVS468 Winlink Gateway K3FZT-10@... direct or via

Experimenting with a new map layout -- comments and feedback requested. ? Screen capture of 30 meters APRS-over-VARA activity on the new *_10.148.200 Mhz USB_* channel as of 3:16 PM Eastern US Time