开云体育

I read your post and then tried to access the pinpoint aprs website and it seems to be down. (Forbidden message). Am I missing something? Here is the url I am attempting: https://www.pinpointaprs.com/

Hello everyone. Been researching how to set up APRS through VARA and I cannot find in YouTube or the search how to do a detail setup to make it operational. I am set up for Winlink VARA HF & FM on our

Unlike other "soundcard apps" like WSJT, mmSSTV, FLdigi, etc, VARA *_DOES NOT_*? control your radio. ?VARA is just a soundcard audio modem. It's the application being used with VARA (WinLink, VarAC

Hello all - I cannot get VARA HF to trigger my rig’s transmitter. The 5000 is not listed on the Radio drop down on the Vara HF Winlink Session window. I tried several Yaesu rigs to see if that would

For the record the radio dial frequency is 10.148.200 for both CW mode (USB) and DATA mode (USB) and filters are all in default. No change in VAFA settings either. Thanks for the explanation.. 73 de

On most radios, the main difference between "USB" and "DATA-U" is that the audio input/output is from the front panel on USB and a rear-panel "data port" on "DATA-U".?? The receive tuning shouldn't

Hmmm. In USB-Data mode I can key the radio using DTR on COM3 but I see in Pinpoint: WA8LMF-6>APU25N:>150213zThis is the new APRS-over-VARA Channel beginning 1 Jan

1)?? Forget all the CAT nonsense and hassle -- set the radio on *10.148.200 USB* or "DATA-U" if it has that mode manually. 2)?? Set the passband or DSP bandwidth tuning of the radio to allow the

I'm listening. Trying to figure out how to get pinpoint 2.1, Vara and my FTdx-3000 to talk. 73 de K3FZT / Steve -- Steve Davidson K3FZT | GMRS: WRVS468 Winlink Gateway K3FZT-10@... direct or via

Experimenting with a new map layout -- comments and feedback requested. ? Screen capture of 30 meters APRS-over-VARA activity on the new *_10.148.200 Mhz USB_* channel as of 3:16 PM Eastern US Time

The migration of 30 meters APRS-over-VARA activity to the new channel of *_10.148.20 MHz USB_*? "dial" frequency seems to be taking off -- - even before the announced? change-over on New Years

Winter Field Day rules stipulate Digital, excluding FT4 and FT8.

Winter Field Day logging - How are you guys logging VarAC contacts for Winter Field Day. "Data"? "PSK"?

If you go into Sounds -> Properties General tab and give each sound device a unique name, Windows will not (always) re-enumerate all of your sound devices after an update and assume they are new

Doug, I just upgraded to Windows 11 24H2 on my shack laptop (HP Zbook) leaving all my devices/radio plugged in, and after all was done, I carefully checked my audio levels and audio/com port

I always read these stories of sound device issues but never experienced anything. I have never seen the COM port issue. But with Windows 11 24H2 and the first update after that, I had to spend hours

Are your audio in and out devices still correct, and not corrupted? It's better now, but Windows updates have in the past messed big-time with DAX devices. Ted VE3TRQ

I agree with Greg. Just like with MacOS & Linux (which I also use), you can reduce your issues by reusing the same USB ports for each peripheral as the OS remembers the last one (if it’s not already

Dave, Thx for your input 73 de Greg [email protected]> wrote:

Greg, I really don't understand all the 'windows updates trash my ports', trash talk. My shack computer started out as a Windows 10 laptop, that was then updated to Windows 11, and through that and