开云体育

John, Signalink has, in my opinion, one of the best set of set-up documents in the industry when it comes to an external audio soundcard interface. If I recall correctly, they have a special section

You might try looking at this setting: right click on your speaker icon in the taskbar, and then click on *Sound Settings*. In this window scroll down to *More sound settings*. This should open up a

Ken, W7EKB, thanks. ?Looking forward to possible fix. Vy 73 DX, John N5CM Sent from the all new AOL app for iOS

That problem is centered around the "new" way that Win 11 handles sound devices.I have a possible solution for you, but am presently unable to get to my computer to send that info to you.If someone

I'm using a Kenwood TS-480SAT and a Signalink USB to run Winlink.? I have the paid version of VARA HF.? I am running Windows 11 on a Dell Inspiron 15 3000 laptop.? I don't use WInlink that often,

Check your station ground and antenna system. The other thing would be some snap-on ferrite cores on any USB cables that are having trouble. It is true that cheaper USB cables have less (or no)

When you say "output of the Signalink", if you're talking about transmit audio, that signal is available on the SignaLink back-panel "Mon" output jack. The SignaLink "Aux" output jack is used to

I have that connected to an external speaker....thanks for the tip...

The Signalink Aux jack allows you to monitor the output of the Signalink.

Again, this is RFI !? Transmit RF is getting back into the shack and cables.??? The VARA "Tune" button produces a single RF tone like keydown CW.? When this single RF frequency is picked up by

Have you used Jtsync or some other clock syncing program? Until I used Jtsyc my WJST would not decode. Using that and naming my com ports has me working all platforms: Winlink, VARAC, VARA, Fldigi,

That's a thought....I'll look into that.... 73 John Smiley-KZ4ZK

I get USB C disconnect when transmitting VARA FM and a Digirig sound card connected to a HT that is not in my hand or with a tiger tail counterpoise….so it is likely an RFI interference issue for

I’ve got TeamViewer up and running, John. K0ION Sent: Tuesday, February 11, 2025 10:07 AM To: [email protected] Subject: Re: [VARA-MODEM] Vara FM and Alinco DR-B185 If I ping the

This sounds like RFI (Radio Frequency Interference) -- transmit RF is being picked up by the keyboard cable and blocking the keyboard input until you stop transmitting. What kind of TX antenna are

Can you ask someone in your club to monitor the gateway while you attempt to connect and listen to see if the gateway is responding? [email protected]> wrote:

If I ping the gateway, after it transmits I get no RF response that I can hear. As soon as the transmission (ping) is through, the receive background noise can be heard but no RF signal. I appreciate

That is actually my club's gateway. I have tried that one and a couple of others..... 73 John Smiley-KZ4ZK

Hi, Windows Update is not an issue here.? The COM port works fine.? Scanning through 8 frequencies works well.? VARA TUNE puts the radio into Tx mode.? The waterfall works fine.? But when the

Sent: Tuesday, February 11, 2025 7:56 AM To: [email protected] Subject: Re: [VARA-MODEM] Vara FM and Alinco DR-B185 Yes the full call sign is in the box....also, since I increased the