开云体育

Dave; Did you get the call sign for this VARA FM Gateway station from your Vara FM Winlink session channel selection list? Assuming you're operating in Snohomish WA, I see lots of VARA FM stations

No I didn't. In my case it is simply a plug and play to change radios. I didn't change the drive level from the DRA-36. The response from the VARA pings to a couple of local digis was virtually the

Do you need to change any settings in VARA or the interface when you switch between the DR-135 and the TD-9000D? [email protected]> wrote:

Bob, I have been using VARA FM with my DR-135 and also a TYT TH-9000D. I added the 9 Pin D connector to the stock TH-9000D with the same DB9 pinout as the DR-135. I am using the DRA-36 36 Masters

I have two TYT TD-9000D low cost Chinese radios and am having trouble getting them to work with VARA FM.? I thought I had this working with the Repeater Builder RIB ALINCO 9600 and the DB9 adapter

On 2/16/2025 3:26 PM, Mark Davis via groups.io wrote: > On Sat, Feb 15, 2025 at 09:31 PM, WA8LMF wrote: > > I would think that it should be WIDE, but perhaps someone else can confirm that. > >

Stephan; You are correct about the FT-991A internal sound card system not having the audio bandwidth to fully support VARA FM 'WIDE" mode, but keep in mind that VARA FM RMS Gateway (and P2P) stations

The built-in sound card of the FT-991 (identical to the external Yaesu SCU-17 interface)? lacks the audio bandwidth for VARA-FM wide.? To achieve the highest speeds VARA-FM is capable of, you have

Thanks, Keith -- I received your message after switching over to VARA HF.? It looks like the only VARA-FM winlink server near me is not fully operational :-(? The signal coming from it is strong,

Dave K7XST wrote… I was going to ask if the message stuck in your outbox was P2P instead if Winlink format, but… I see where you connected to the RMS, but I don’t see any evidence that it

The RigBlaster Nomic is just an audio coupler/isolator - there is no sound card in it like the DigiRig.? You would have to connect it to another sound system such as the one in the computer -- or --

Sorry I meant IC -F320. I got it sending and receiving emails with a Digirig and Digirig cables, but not with the Rigblaster. So I need to spend a bit more time with the Riglaster documentation. It

Hello -- I am connecting to a local Winlink RMS via VARA-FM.? Although I get a connection, my outboxes messages aren't sent, and I'm not receiving any messages I have coming in. Here are the

Hello, I am trying to set up mobile Icom IC-320 radio and West Mountain Rigblaster Nomic sound card to work with 2m RMS Winlink and VARA FM. The RMS Express program causes the radio to transmit and

another update has been made. fixes some issues regarding cpu usage.

Doug, That forced driver update from the manufacturer (Logitech) worked.? I have no idea why when using VARA HF for SHARES killed the connection.? So weird.? Thanks for your advice. -- 73, Rory

I would suggest looking at the USB device driver(s) for your hardware. I'm not talking about the standard stuff that comes in via Windows Update. Get the model number or serial number of the

A gateway will run at full speed without the need for a license, per Jose. However, when using Vara to send or receive your own email a license would be required to get the same effect. Not sure how

I will say that I have used W11 and my signalink for running both a RMS and APRS for months at a time with no issues. Greg

VE7KHI on Hornby Island is connected somehow to EM on the Islands just off Power River. I know he posted on the Winlink Google Group. 73 *Don PoapsNew Westminster, BC*VA7DGP DATA VA7QU