开云体育

Brian (W7OWO) has been a very beneficial consultant for our (K7MAR) project. After much hair pulling and frustration the "Mike Spohn N1SPW" document "Windows-11 Digirig Sound Settings" got us on the

The C-Media CM-108 and CM-119 sound chips, ? used in many USB sound "dongles" sound card, and used in several ham digimode interfaces (DigiRig, Masters DRA, etc), ?? have a single-bit I/O pin in

Thanks again. I will try a com port splitter app. https://freeserialportsplitter.com/ I have DIRWOLF loaded, but not running yet - still reading the documentation. Is C media a distinct piece of

You can't run dual-mode using my instructions with a sound card interface that uses a COM port for PTT. You would need a COM port splitter application to make that work. My instructions assume you are

I forgot to include: When building the dual mode gateway with the DigiRig Lite, I found the initial volume levels recommended in the instructions were too high.? I eventually ended up with? the

Thank you to everyone who sent advice. I tried several suggestions. I think packet mode is getting close to working but the message is not sent. Hardware: 1. gateway - Initially Yeasu 1500M, now

I have I have 5 dual mode RMS Gateways I maintain for my ARES group, and two personal dual mode RMS Packet gateways that I use for training exercises and exploration of features and operations.? ? I

Make sure the cable is connected correctly. There are some cables that have an elbow in them, which be the side connecting to the radio. Connecting it with a straight jack will work but not transmit

That’s normal <davetelling@...> wrote:

@W0EG: Top of the 3rd green arc, about "1:30" position.

How high is the VU meter on receiving? <davetelling@...> wrote:

George, I have run a Wnlink Packet RMS station for about 6 years now. I use an ICOM ID-880H mobile rig and a SignalinkUSB. The system is configured in both soundmodem and VARAFM to use VOX within

I get the same result using an AIOC and a Baofeng HT with VARA-FM. Everything works great accessing a local packet BBS, so I know that the hardware is working, but when I try a Winlink session, I see

Hi Mike, I am running a Winlink RMS Packet gateway.? The RMS Packet automatically connects to either Soundmodem or VARA FM depending what what mode it hears coming in. I can't seem to configure the

On my setup (DigiRig + SoundModem) I must have the Windows Sound Card Playback level no greater than 45 or the radio (Icom IC-207H) will not transmit. -Randy, W4IFI

Hi George, I've been running both side by side successfully for over a year. There are a few things to be aware of with Packet. The biggest thing is the timing. But I was able to get both to function

I am probably missing your point. I use WINLINK with packet and soundmodem OR I use WINLINK with VARAFM. ?VARAFM never used simultaneous with soundmodem.

It's a pretty easy setup. We've used a Yaesu 1500 and also a 7100, Signalink, Soundmodem and Vara. All are using VOX and it works perfectly doing so. We are only running 1200 since the Signalink is an

Thanks, Steve, I took a look at the modems. Looks like there are some for the radios I have been testing. George

Hi Bob, I have been using different radios. https://yara.ca/photo_albums/2025_2mWinlink/ George