开云体育

I am also having this exact same issue. I have been able to do some more digging and have discovered in varafm that initiating an autotune will yield the error "bad callsign" if there is an ssid on

I waited until 2:20 our time, then had to leave to help move some furniture with my son. If there’s another time available, please let me know. Thanks de Keith VO1AE Sent: November 23, 2024 1:11 AM

Well, thank you. I’d appreciate any help to solve the problem. And yes, that 7300 is an amazing radio. Keith P

Keith, I am a member of the Winlink Development Team, specifically tasked with Tech Support. I have helped MANY operators get all this up and cooperating. I also have a 7300 (easiest radio ever to

You were correct Thomas. The NB and NR were on. I did get to make a few tries at a couple of stations but couldn’t connect. I noticed there was no power output. Perhaps something else needs

Thank you….I’ll check that out. A case of “How could I know if I didn’t know!” ?

Keith, You appear to have NR and /or Notch filter engaged. There must be nothing affecting the linearity of the waterfall. Should look like this:

Ok.Coming to the group shortly. Tnx. KP From: [email protected] <[email protected]> On Behalf Of Thomas KF7RSF via groups.io Sent: November 22, 2024 5:09 PM To: [email protected] Subject: Re:

Here it is….Not sure why two grabs showed up. Both are the same anyways. De Keith VO1AE Sent: November 22, 2024 5:09 PM To: [email protected] Subject: Re: [VARA-MODEM] VARA HF Anything obvious??

Keith, Post a screenshot of the VARA HF TNC waterfall when this occurs. A common reason for this "Channel busy" error is having the Filter 1 set to too narrow a bandwidth. It needs to be set to 3.0K.

Further to Below….Twice when I went from WinLink to FT8 I had to use the SD card to revive the settings, because I couldn’t transmit. For anyone that hasn’t made an SD backup…DO IT!!!!! Best

Here’s a screen grab of WinLink Express this morning. In a nutshell: I: ?I heard the cute little sounds from VO1GNP 2: In Channel Select I chose *Start* and the script? showed *VARA TNC* was

Jean, I am in the process of setting a link on the W6RAY-4 BBS in central California. I have it all set up, but working some minor issues still to be worked out. I plan to attempt connecting with

Hello, I am at work so it's a very quck reply 1) USB on all bands 2) Most of the winlink gateway are supporting vara you can get the list here 73 de Olivier HB9TOB [email protected]> a écrit :

It sounds like you have the idea. Be sure that the same input to the modem is selected under Settings ->Soundcard. 73 Danny, K5CG HH 550-0609 SKCC 14257 To: "VARA-MODEM" <[email protected]> Sent:

Thanks Lee, ???? I have not seen that.? Will try tomorrow. Jean

[email protected]> wrote: Hi again, Below is the info from the site. I just realized the SSID is incorrect for my BBS - should be K5DAT-1. [image: image.png] 73, Lee K5DAT

Hi Lee, the? TPRFN group ( https://www.tprfn.net/ ). will tell me the band but not the frequency. unless I did not look at the right place. Jean

[email protected]> wrote: Ahh, I see, you were looking for BBS's in operation, so Jeff's answer was a lot better than mine. As he mentioned, there are several BBS's using VARA HF that are part of

Hi Lee, ???? I am aware BPQ support VARA. I am looking for some who are on HF, Call and Frequency. VE2PKT Support VARA FM, but I am 2800milles, since there is no HF on PKT, I am looking for a door