开云体育

One picture of the overall board, and one picture of what may be points for a connection -- KA9CAR

I have a TM-271. I just the cut the end off an old RS-232 cable and soldered 4 wires to a pad on the board. I have been using it for years without any issue. A multimeter helped me to figure out which

Hi John, On the back should be a 6 pol miniDin connector for use of a audio-interface. I did look to a Kenwood manual and it says that only a E version (Europeen?) has that connector and the A

Hi John, Can you post a picture of the board? KG4OPX

That was the ticket Noel, I had it set for 1200 for wide. Thank you for the tip, Phil / K4PO

Thanks to all for your responses. My intent is to use the radio in emergencies. [email protected]> wrote:

Check VARA FM Settings and Windows sound settings with VARA FM running.? Check PTT settings software. -- Roy Dugger, KD6R

Sorry, misread the question. Thought it was the FT-991a group.

I took a chance and purchased one of the Kenwood TM-271 online from China with the intention of adding the data connector for use with VARA. I have the radio, but the circuit board is nothing like the

Yes. ?I use the internal sound card. ?It won't support FM Wide but I'm OK with that. ?Took a bit of work to figure out all the menu settings. ?But there are several web sites with advice on

YES! I have been using it successfully. I use the data cable along with a separate sound dongle plugged into my laptop. SABRENT USB Type C External Stereo Sound Adapter for Windows and Mac. Plug and

Carol, The challenge with the *FT-891* and *VARA FM* is *VARA FM* would only work on *10 m* and *6 m* bands.? In most regions, there are *very few VARA FM RMS gateways operating on 10 m and 6 m

Yaesu FT-891: Has anyone used this radio for VARA FM?

Menu item FM PKT mode will not transmit in 9600 . Transmit Only in 1200

Thank you Chris, Noel, and Larry Those hints were anticipated though match my initial settings.? Double checked, actually triple checked then still no modem audio exchange.? Hardware issue would be

If you have a backup of your varafm.ini file it is in there. 73 Ray ae5hn

I use FM Data mode for VARA FM on my 991. Set audio input for that mode to USB in the menus then you don't have to keep switching back and forth when you use FM voice. Once you get it working, save to

The menu item is in the 70’s fm mike select rear / mike Noel

I’m not sure of the menu number but in FM part of the menu switch mike to rear. Larry KF5MLP Sent: Wednesday, June 19, 2024 2:26 PM To: [email protected] Subject: [VARA-MODEM] FT-991 (non-A) FM

Hey all you FT-991 VARA FM ops, I surrender, my FT-991 based VARA HF works as expected.? My issue is with VARA FM audio throughput.? Transmit keys, but no audio passes either way.? Since HF audio