开云体育

Scott, Re the DRA-50… So you build one cable with both the 1200 and 9600 lines going thru and then jumper in the DRA as to what speed you want? Din 6 on each end… depending on the radio. Our

When using the "9600" pins on a radio you are connecting directly to the receiver discriminator (not bypassing it) and the transmitter modulator. It generally takes a lot more drive when you are

OK, I cranked up the volumes and that seemed to do the trick.? It is interesting the difference in volume levels between the two settings on the radio. Thanks again, Mat

Mat, In the VARA FM settings, Vara Setup, FM settings to Wide? Level all the way up on whatever channel (L or R) on the DRA30 you are using? Sound card RX level (L or R) up to at least 50%?

I have two DRA-30's with the DIN-6 Connector board attached to a Kenwood D710 and V71 for testing.? I have had good results testing VARA-FM in narrow mode with each radio having their data port

Thanks. Mat

It works identical on any FM mode. 6 Meters, 2 Meters, 220 MHz, 440 MHz etc. For best results the radio needs the “9600” mode and data connector. Or, You need to otherwise connect the sound

Does VARA wide mode run on both VHF and UHF or just UHF?? If it can run on both, do you get better speeds on one band verses other? Mat

Reporting that VARA FM v3.1.0 was downloaded and installed, updating from the prior VARA FM v3.0.8 we were running. Are there release notes or other indication what this change does? Feel free to use

Lewis - K7LBH I tried contacting you via VARA CHAT yesterday evening on both 80M and 40M... no response. I was able to connect with a VARA HF gateway in Bandon OR, so I believe my VARA HF setup is

Maybe deactivate virus scanner? The program works vert well here. P-T

Yes I did.

Did you run it as Administrator? P-T

I tried to install VARA chat today and got the false positive virus warning, got around it, but when I tried to run it came up with a warning for some bot and would not run. AL M KF5SMH

Walter/K5WH... The VARA HF P2P mode is listed as "Vara P2P" in the session drop-down list on the Winlink Express main window. K7LBH - Lewis... what VARA HF mode are you looking to test with? P2P, or

But isn’t that just emailing back and forth? When using Winlink. > Correct. What about a real-time mode, like a PSK mode or something. > There is

Thanks Per-Tore, But isn’t that just emailing back and forth? When using Winlink. What about a real-time mode, like a PSK mode or something. Thanks, Walter/K5WH Sent: Thursday, May

Yes! We use it regularly with Winlink Express. Per-Tore / LA7NO

Is there an option for Vara P2P? I would be interested in that myself. I understand all the benefits of the other components for emergency message handing and messages etc.. but I would like

VARA HF P2P? Mark - AD7EF