I have two DRA-30's with the DIN-6 Connector board attached to a Kenwood D710 and V71 for testing.? I have had good results testing VARA-FM in narrow mode with each radio having their data port configured in 1200 baud mode.? I now want to start testing Wide mode.? I configured each radio's data port to 9600 bps which should adjust the audio path to bypass the onboard discriminator.? I also moved the 1200/9600 pin on the DIN-6 Connector board.? It doesn't matter which radio I try this on, when I press the tune button on the SoundCard menu in VARA I see the radio key up but I do not hear the tone I normally hear when the radios are configured in 1200 bps mode.? I have check the cables for continuity and I have checked the DIN-6 connector board for continuity between the appropriate 9600 bps pin and the board.? All looks good there.? In VARA the Audio Input meter is showing signal as well.? I don't have any of the pins jumpered on the DRA-30 if that matters.? Thoughts?
Mat
