开云体育

I will say that I have used W11 and my signalink for running both a RMS and APRS for months at a time with no issues. Greg

VE7KHI on Hornby Island is connected somehow to EM on the Islands just off Power River. I know he posted on the Winlink Google Group. 73 *Don PoapsNew Westminster, BC*VA7DGP DATA VA7QU VOICE *Winlink:

Thanks Don that's pretty much what I thought I'm looking forward to getting everything set up 73 Ron VA7HZ

Ron VA7HZ If you are using your callsign and you have it licensed. OK If you are using another call. You can use varafm barebones but getting a license you get opens up the audio tnc program. 73 *Don

Hello group, I am fairly new to some parts of Vara I have a registered copy under one callsign but I am looking to set up a vhf gateway as there is very little coverage in my area. I wish to use

Rory Is your keyboard connected to a powered USB hub? If it is a laptop keyboard then your computer should be always allowing you to work with it. If using an external keyboard (USB,) then I would

Hi all, So I tracked down the cause (kinda).? Only when I start VARA HF and the modem Sound Card is connected on the OUTPUT side to the Jupiter Sound Card.? The INPUT connection does not affect the

Hi, To all who responded, thank you.? Please note however the following.? This occurs when I start up this particular VARA.? No transmission occurs.? As soon as VARA starts up, the keyboard goes

After all the suggestions and modifications you all have helped me with I am able to get vara fm to work correctly. I'm not sure what the key was but I appreciate so much all of the input I have

I've tried using Signalink USB with my gateways on a Windows 11 machine and could never get it to stop dropping the S/N ratio to pitiful values after 24 hrs or so of being plugged in, so I went with

John, Signalink has, in my opinion, one of the best set of set-up documents in the industry when it comes to an external audio soundcard interface. If I recall correctly, they have a special section

You might try looking at this setting: right click on your speaker icon in the taskbar, and then click on *Sound Settings*. In this window scroll down to *More sound settings*. This should open up a

Ken, W7EKB, thanks. ?Looking forward to possible fix. Vy 73 DX, John N5CM Sent from the all new AOL app for iOS

That problem is centered around the "new" way that Win 11 handles sound devices.I have a possible solution for you, but am presently unable to get to my computer to send that info to you.If someone

I'm using a Kenwood TS-480SAT and a Signalink USB to run Winlink.? I have the paid version of VARA HF.? I am running Windows 11 on a Dell Inspiron 15 3000 laptop.? I don't use WInlink that often,

Check your station ground and antenna system. The other thing would be some snap-on ferrite cores on any USB cables that are having trouble. It is true that cheaper USB cables have less (or no)

When you say "output of the Signalink", if you're talking about transmit audio, that signal is available on the SignaLink back-panel "Mon" output jack. The SignaLink "Aux" output jack is used to route

I have that connected to an external speaker....thanks for the tip...

The Signalink Aux jack allows you to monitor the output of the Signalink.

Again, this is RFI !? Transmit RF is getting back into the shack and cables.??? The VARA "Tune" button produces a single RF tone like keydown CW.? When this single RF frequency is picked up by