开云体育

Noel, Good idea. I tried these settings, but ran into one glitch. Under the sound card settings, the PTT box was blank and wouldn’t let me select anything. Thus,, I couldn’t select RA Board-1. I

ON my ft710 in vara hf winlink settings i use radio model yaesu 991a, usb digital, serial port whatever it is, NO RTS or DTR ptt port FT991a On vara hf settings? vara setup check RA-Board PTT. even

Make sure your radio is in "USB-Data" [upper side band data] mode. That tells the 991A to look for audio input through the input set in the menu, its either rear using the Din connector, or USB

On a Windows PC, it is super important to only plug your USB cable(s) from the radio into the very same physical port, every time. If you change to a different port, the assigned COM port will change,

Addressed to WA5LUY..... 1)??? RSGB??? Have you not updated the symbol set for UIview? Only the original un-updated version of the UIview? symbol set from years ago would show RSGB.?? [Note

[Sorry, I think I meant to reply to another thread in this forum.] This is what is working for me, exceptionally well. I have hit many RMS stations all over the world. -- ** Mark Weisenfeld

Thanks. I have already posted on the forum. There was a problem logging in yesterday, but it was ok today. Thanks for telling me about the manuals particularly.

David, I made 3 folders on my HP Win 11 CPU; VARAHF, VARAVHF, and VARAC. Using a powered USB 7 port device I named my Com ports for the interface for VARAHF, VARAVHF, PACKET. Win updates now do not

No, there is no Groups I/O for VarAC. There is the group forum on the VarAC website. Manuals & Troubleshooting | VarAC ( https://www.varac-hamradio.com/forum ). There you can ask questions and will

Except that I was told by the software itself to go to Google I/O. There is apparently no google group for VAR AC. My main question actually involves how to switch between the two different modems,

Sometime I use the 28.148 Mhz in VARA Aprs [email protected]> escribió:

Jose, Thanks for the correction on your location. I should have looked you up. Your symbol in the station list showed?RSGB so I assumed you were in the UK. Have fun with HF APRS. Wayne WA5LUY

This groups is for VARA and not VarAC, two different programs. Ask this question on the VarAC forums section on the VarAC website.?Thanks and 73,Jim, N8JE?Sent from my Galaxy

I am ea8ee no ea8ff and I am not in the United Kingdom but Gran Canaria island Spain [email protected]> escribió:

PIeter, I have not tried using ARDO. I will give it a try. I have no rouble triggering the radio when using WSJT X modes. Thanks,,,, Richard KZ4JV

It is still there. Enter like this I don't believe VarAC interacts tuners. Your tuner would need to be automated and tune based on CAT control from your transceiver, etc. 73 Danny, K5CG HH 550-0609

You can create a distinct .ini file for each profile. Pass the .ini file as an argument to the exe and that is what profile will run. For example, a shortcut on my desktop... C:\...\VarAC.exe

[email protected]> wrote: _ > On the radio, there is an "RPTT" setting for the mode you are operating in. I'm operating in Mode SSB, so for RPTT in SSB mode, the default setting is "DAKY", which is

Richard i am not familiar with your specific radio Can you trigger your radio with ardop for example? If you trigger via the usb port which i assume can do sound and ptt then it is easy but i think

I have been monitoring HF 30M APRS stations for a number of years using AX25 packet. It is not uncommon to hear and I-gate European station when the band is open. a couple of months ago I set up a