开云体育

Stephen, Thank you for clearing that up. Your station is S9 here. I got the message about Lynn KJ5ER this morning. He will be missed by the APRS community. Wayne WA5LUY

It's me, WA8LMF.? KJ4ERJ generates an object for the current location of the International Space Station and injects it into the APRS-IS every two minutes. I take this object off the APRS-IS and

I set my Rx on 10.148.200. This is from the monitor screen from RF only. Can you explain what is going on here. Who is sending the ISS information? is it WA8LMF or KJ4ERJ? 19:05:35R WA8LMF-6>APU25N

[email protected]> wrote:

Due to frequency overlap with, and interference to/from,the "Robust Packet" channels used in Europe,? APRS-over-VARA is moving to a new channel ABOVE the present AX.25 APRS channel on 30 Meters.

There seems to be confusion about the COM port resources on the FT-991.?? Three devices appear on your PC when the FT-991 is connected to a PC. * One is the internal sound card that appears as a

[email protected]> wrote: Winlink Express. Does that mean the other (standard) serial port is not used (COM14 in your case) for PTT, or does it mean that it is used? It seems that if it were used,

HI Mark, Thanks for the info on your settings. I tried them. However, for whatever reason, I am still not triggering the PTT on the FTdx10. All your settings were very clear except it looks like you

Answers. Question 1. Just never bothered to do it. I rarely look at the symbol collum. Question 2. 30M dipole from tower to tree at 30 feet above ground. What is on the list are Vara only stations on

Re-posting this to the thread I intended. ---------- Forwarded message --------- This is what is working for me, exceptionally well. I have hit many RMS stations all over the world. See my history

Noel, Good idea. I tried these settings, but ran into one glitch. Under the sound card settings, the PTT box was blank and wouldn’t let me select anything. Thus,, I couldn’t select RA Board-1. I

ON my ft710 in vara hf winlink settings i use radio model yaesu 991a, usb digital, serial port whatever it is, NO RTS or DTR ptt port FT991a On vara hf settings? vara setup check RA-Board PTT. even

Make sure your radio is in "USB-Data" [upper side band data] mode. That tells the 991A to look for audio input through the input set in the menu, its either rear using the Din connector, or USB

On a Windows PC, it is super important to only plug your USB cable(s) from the radio into the very same physical port, every time. If you change to a different port, the assigned COM port will change,

Addressed to WA5LUY..... 1)??? RSGB??? Have you not updated the symbol set for UIview? Only the original un-updated version of the UIview? symbol set from years ago would show RSGB.?? [Note

[Sorry, I think I meant to reply to another thread in this forum.] This is what is working for me, exceptionally well. I have hit many RMS stations all over the world. -- ** Mark Weisenfeld

Thanks. I have already posted on the forum. There was a problem logging in yesterday, but it was ok today. Thanks for telling me about the manuals particularly.

David, I made 3 folders on my HP Win 11 CPU; VARAHF, VARAVHF, and VARAC. Using a powered USB 7 port device I named my Com ports for the interface for VARAHF, VARAVHF, PACKET. Win updates now do not

No, there is no Groups I/O for VarAC. There is the group forum on the VarAC website. Manuals & Troubleshooting | VarAC ( https://www.varac-hamradio.com/forum ). There you can ask questions and will

Except that I was told by the software itself to go to Google I/O. There is apparently no google group for VAR AC. My main question actually involves how to switch between the two different modems,