开云体育

[email protected]> wrote: https://www.cantab.net/users/john.wiseman/Documents/VARA.html 73, Lee K5DAT

There's a lot of BBS's that use VARA.? This link shows a bunch of them: https://www.tprfn.net/

Hello Jean Data is typically used on USB. Data would include VARA but is not limited to VARA. Other modes including ARDOP, FT8, WSPR, etc. would also be used on USB. 73 John Denison KD5YOU

Hello, Can anyone tell me how to monitor a VARAC conversation? I have set up another instance of VARA HF to run in monitor mode and have selected Monitor on the Monitor pull down. I can here the

Good day all, ????? I hope I am at the right place for those 2 questions: 1) is VARA HF in LSB or USB? 2) Is there on HF a Packet BBS supporting VARA? short and sweet. -- 73 de Jean, VA2OM /

In the Windows task bar, right-hand side. If an app is currently using the microphone, the icon shows up there, and if you click it, it takes you to the 'new' Windows 10/11 Settings app, which is not

Where is this icon?? Was just looking at the bottom portion of the VarAC window and not finding it? Stu -- N7QJP

Run Windows Key+R mmsys.cpl to bring up the sound control panel. Make sure that the 'default' mic and spkrs are NOT set to whatever audio channels you have associated with your radio interface. Always

I was on VaraAC talking to a guy. He said my audio as passing through. ( don't know how that could be) I have not had any issues with several contacts. He told me to click on the microphone at the

In October 2024, I made a major road trip from my home QTH in central Michigan to Los Angeles and back.? On this trip, I made the most extensive test yet comparing the performance of classic 300-baud

1)? ?What does this question have to do with the subject line? "VARA APRS on on 28.148 MHz"? 2)? I run APRS-over-VARA igates on 30 and 60 meters.?? I have tested and verified that these two

Active using APRSIS32 or Pinpoint [image: Mailsuite] Enviado con Mailsuite · Darse de baja

Go to Wavetalkers.com and watch the first handful of videos on setting up Winlink. It's amazing how much information is contained in those videos. 73, -- Dave, N8SBE, Hamshack Hotline 590-0971,

Hi Robert, These are the setting that I use for VARA HF. I am trying to find a group of settings that works for all modes, but that is a work in progress.? Let me know if you have any questions or

I am linking Pin Point to Vara Kiss over IP on the transmitting station. I have tried Vara to a Signalink and a DRA 30. Set both levels correctly. Vara tones sound good over the air. Both stations

Howard, could you also send this Excel file to me? Thanks, Robert “Mike” Ward KC9WGY Sent: Tuesday, September 17, 2024 17:28 PM To: [email protected] Subject: Re: [VARA-MODEM] Windows USB

John Every command must? end with <CR> ascii char Hope this helps 73-Graham

I had it working with my Surface Go tablet and Yaesu 991A. I had to replace the tablet now nothing. Cant get VARA to show the PTT menu even though PinPoint says TNC connected. John Madden N4EJM DMR ID

DX Engineering sells a two coil kit that can be used with four 17' wires as an inverted V dipole & be used on 80 meters. Of course most of the band would need a tuner, but I got mine resonant right in

Thanks for the heads-up. I did see that earlier today and from it got an idea of what it does. In my case the antenna situation is in a bit of a limbo. I stepped away from the hobby for about 10 years