¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Re: VARA-FM Highly Variable Throughput
Jeff, Using the 991 usb sound device the audio passed through the USB is not emphasized.? ?I don't know why you might be using an external sound card.? I connect audio and CAT through the USB on
By Philip - K4PO · #7671 ·
Re: VARA-FM Highly Variable Throughput
Chris, I just tested the FT-991 today to confirm it is capable of Vara Wide and it is.? It wasn't mentioned before, but make sure the radio is in DATA-FM mode.? It will appear to work in FM mode,
By Jeff WX7OR · #7670 ·
Re: VARA-FM Highly Variable Throughput
Hi Stuart and others, Yes you can use a phone repeater *BUT* you have to set in VARA-FM program via "Settings" and "VARA setup" at "FM system" in *NARROW* and not in WIDE. This is for the *all* users
By Peter , PE1DCD · #7669 ·
Re: Autostart VARA, Flrig and hamlib on Raspberry Pi 4
Thanks, Wheez. That may be the piece I need. I am still muddling my way through Linux but I cut my computer teeth in CP/M on Z80s. Dave WB9TEN
By [email protected] · #7668 ·
Re: VARA-FM Highly Variable Throughput
Chris, et.al. Lots of lessons learned in preparation for the actual exercise.? I look forward to the after action report of the event. Another option you may wish to test is using a VHF repeater to
By ve3smf · #7667 ·
Re: Soundcard device missing in action!
John. Congratulations on getting VARA Running. I didn¡¯t think of the antivirus firewall. Longer dx seems to work better here, up to BC or down to CA. 20 meters seems to work best for me. 73. Ken
By Ken Cone · #7666 ·
Re: VARA-FM Highly Variable Throughput
Today we tested again. We moved to a less desirable site at the request of the Fire Chief. Unfortunately a large metal building was in the way which impeded signals sufficiently to make file transfer
By Chris VE3NRT · #7665 ·
Re: Soundcard device missing in action!
Tnx, Roy. I am using Kaspersky Premium.? As far as I can tell, it's a good product. Vy 73 DX, John N5CM
By John Dempsey · #7664 ·
Re: Autostart VARA, Flrig and hamlib on Raspberry Pi 4
Not sure if this helps but just for some ideas: You might be able to autostart VARA using systemd calling ¡®wine /path/to/VARA.exe¡¯ and checking to see if its process launched using pgrep. You can
By Wheez · #7663 ·
Re: More APRS-over-VARA Testing on Cross-Country Road Trip Next Week
If it would be of any benefit to this test, I can operate a VARA Igate along with my Robust and HF packet Igates on 30 meters. Ron WA7GMX
By Ron · #7662 ·
Autostart VARA, Flrig and hamlib on Raspberry Pi 4
I am in the planning stages of adding VARA to an up and running LinBPQ site that is using Direwolf for VHF. Our intention is to use a CAT controlled HF radio that has yet to be acquired for an RMS
By [email protected] · #7661 ·
Re: Soundcard device missing in action!
Hi John, Congratulations!? Which antivirus are you using if I may ask? -- Roy Dugger, KD6R
By Roy KD6R · #7660 ·
More APRS-over-VARA Testing on Cross-Country Road Trip Next Week
On Sunday 16 June 2024, I will be departing from entral Michigan on a cross-country road trip to Los Angeles.? I will have "Studio B" (my mobile hamshack and radio operations trailer) in tow. Once
By WA8LMF · #7659 ·
Re: VARA-FM Highly Variable Throughput
Jim - Our local ARES groups regularly practice Winlink P2P operation over VARA FM links, and have very little trouble coordinating these sessions, using voice, over the same channel that is used for
By Mark Davis · #7658 ·
Re: VARA-FM Highly Variable Throughput
Chris, I apologize. ?Mark is correct. ?You can do Vara Wide with the FT-991A. ?Just use the cabling and jumpers as he describes. Jeff WX7OR
By Jeff WX7OR · #7657 ·
Re: VARA-FM Highly Variable Throughput
That's the behaviour I saw. The west station (I was at north) sending a file to us said the 6-pin data port was being used with the correct settings, but perhaps it needs to be checked further. I've
By Chris VE3NRT · #7656 ·
Re: VARA-FM Highly Variable Throughput
Jeff WX7OR wrote: ¡­ the FT-991A isn't VARA Wide capable even with an external sound card. Not so!¡­ You¡¯re right about the FT-991(A) not outputting ¡°9600bps receive¡± audio on the
By Mark Davis · #7655 ·
Re: VARA HF display data missing no green. I didn't find the answer in previous posts.
I have some info on YouTube. Go to my channel; https://www.youtube.com/channel/UCY0Y7elKF6vegQZlyYC7Pxg Larry KF5MLP
By Marvin Penepent · #7654 ·
Re: Soundcard device missing in action!
Thanks to help from Jason at Signalink, I believe the problem is solved.? I had everything set up properly, but my antivirus wasn't allowing use of the microphone.? After I went in and authorized
By John Dempsey · #7653 ·
Re: VARA-FM Highly Variable Throughput
I haven't seen it mention in this thread yet, but the FT-991A isn't VARA Wide capable even with a external sound card.? The radio lacks a data out pin that by-passes the filtering.? Search this
By Jeff WX7OR · #7652 ·