开云体育

I think that is it. I have never seen any other site.. 73 jerry Sent: Thursday, May 14, 2020 9:48 PM To: [email protected] Subject: [VARA-MODEM] Vara Website I just went to grab a paid version of

I just went to grab a paid version of vara and the site just looks a bit suspicious. https://rosmodem.wordpress.com/ Is there an alternate site? Thanks,

Hi there, Just wondering what has been updated from Vara HF version 3.0.6 to 3.0.7 Cheers Mark VK3ASC

Dave: USB receives OK but it won’t transmit. I don’t understand why it works in the DATA mode with FT8 but not on ARDOP or VARA. I can make it receive VARA OK by going in the MENU and shift the

Have you tried using just Upper Sideband mode with the widest filters? I'm not familiar with the FT-2000 but I suspect that it is set for a narrower mode digital signal, like packet or RTTY. Older

My FT-2000 appears to shift the passband when using VARA. In the Yaesu DATA mode the waterfall signal is about 25% of the normal width and crowded on the left side. It works just fine in the WSJT

A very good recommendation!!!! ZZ has here. I run Shielded CAT7 everywhere …. I started out using CAT6 Shielded many years ago, doing that when I had DSL as my RF would drop my internet. Well worth

Yeah it does connect on Ardop and winmor and now it to connect on VARA HF it took a while but finally found a station or connected too Thanks?Noel Villarreal-KD5PMUSent from my T-Mobile 4G LTE

Sir, VARA, although superior in speed and weak signal reception is also rather sensitive to RFI. I had no problem connecting with Winmor but failed repeatedly with VARA until I upgraded by cables

Noel, As a suggestion try connecting to a station using either Winmor or Ardop. Verify the station does operate on all HF modes. Once you established a connection disconnect and try reconnecting using

Ok I got VARA HF to transmit now but I tried to connect to several stations and I couldn’t connect keep says failure to connect to the station tried to set my tx and RX settings on my signalink but

No Sir The Red Transmit light on the Signalink does not come on have it on winlink set to VARA HF and the VARA HF software is on? I have tried other modes such as ARDOP and Winmore and those work and

Not much info to go on but the first thing would be…. does the red PTT light on the signalink come on when you attempt to transmit? If yes, check keying line pinout to the radio. If no, it is

Trying to setup VARA HF have a signalink I have tried all my audio settings it doesnt transmit to the signalink for some reason I have no problem with other mode such as Ardop and Winmore on winlink

You can download from that same page without using that service. He also has a VARA Chat program for keyboard to keyboard capabilities. Just be aware that when you connect with someone your radio (and

Anyway to download the new update by bypassing the mega page?, it shows the new update? but it shows download mega first, any other page to download? ...Also any frequencies on HF to make a keyboard

Looking here I do not see a list of changes..??? Ill keep looking.... 73 https://rosmodem.wordpress.com/

Hi John... I just installed it an hour ago.. Bands seem pretty bad here.. Ill try it out.. Ill also ask the Author about this behavior. Ill let ya know what I find out.. Thanks for heads up 73 Jerry

Do you notice that the first connect packet begins with a new two-tone start?? Subsequent connect packets sound normal.? I just want to make sure that is a new 3.06 behavior and not something weird

Thanks. Is there a list of changes/improvements somewhere? P-T