Yes, I'll check, but I never have used P2P, so I'd be surprised if that was the case.
Another guess.? Is the message in your outbox set as Winlink, instead of P2P?? If set to P2P, then unless you are connecting to a node that is in P2P listening mode and also is the callsign your message is addressed to, then the connection/transfer will fail.
73,
-- Dave, N8SBE, Hamshack Hotline 550-0971, HamsOverIP 101018, AmateurWire 1348
On 2025-03-03 20:20, Dave Telling, KJ7WT via wrote:
Hello Mark,
Yes, I tried autotune and ping - no response. The last time something like this happened, I found it was because I was selecting VARA FM Radio only. Once I selected VARA FM Winlink, everything worked, so I am at a loss to understand what happened.
73,
Dave, KJ7WT
?
Have you tried running an "Auto Tune", from the VARA FM "Settings -> SoundCard..." window?
?
On your 'monitor' radio, you should hear all 10 signal bursts at increasing audio levels. Many radios stop transmitting if the audio level is too high.
?
Make sure that you've entered the full call of the station you're trying to connect with, in the "Calibrate with:" field.
?
Mark - AD7EF
