Another guess.? Is the message in your outbox set as Winlink, instead of P2P?? If set to P2P, then unless you are connecting to a node that is in P2P listening mode and also is the callsign your message is addressed to, then the connection/transfer will fail.
73,
-- Dave, N8SBE, Hamshack Hotline 550-0971, HamsOverIP 101018, AmateurWire 1348
toggle quoted message
Show quoted text
On 2025-03-03 20:20, Dave Telling, KJ7WT via groups.io wrote:
Hello Mark,
Yes, I tried autotune and ping - no response. The last time something like this happened, I found it was because I was selecting VARA FM Radio only. Once I selected VARA FM Winlink, everything worked, so I am at a loss to understand what happened.
73,
Dave, KJ7WT
?
Have you tried running an "Auto Tune", from the VARA FM "Settings -> SoundCard..." window?
?
On your 'monitor' radio, you should hear all 10 signal bursts at increasing audio levels. Many radios stop transmitting if the audio level is too high.
?
Make sure that you've entered the full call of the station you're trying to connect with, in the "Calibrate with:" field.
?
Mark - AD7EF
