¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: Vara FM and Alinco DR-B185


 

It seems that you have found the problem area.? No PTT signal.? I don¡¯t know how the SignalLink works for PTT. ? ?Does your packet modem software use VOX or a com port?

On Thu, Feb 6, 2025 at 5:00?PM SMILEY kz4zk via <kz4zk=[email protected]> wrote:
Ra board responds ra board not found. It is currently set on vox.

?? 73

smiley - kz4zk

On Thu, Feb 6, 2025 at 16:49, Bob W0EG via
<morrisnc7=[email protected]> wrote:
What is your PTT via setting in VARA?? Likely should be RA board.


On Thu, Feb 6, 2025 at 4:40?PM SMILEY kz4zk via <kz4zk=[email protected]> wrote:
I am not receiving or transmitting...nothing to listen to. I have tried opening the modem software first and last....

?? 73

smiley - kz4zk

On Thu, Feb 6, 2025 at 16:19, Bob W0EG via
<morrisnc7=[email protected]> wrote:
Try monitoring your transmission using a second radio.? You should hear a steady digital buzz. Then listen on the channel to see if the gateway is responding.? As others have stated, level setting is critical and only use vara narrow mode. ?
?
Try opening the VARA FM modem software first before starting Winlink Express.? The observe the IQ display to see if you get a good response.? Be sure AVC is not checked in Windows audio setting for the USB signal link.


On Thu, Feb 6, 2025 at 2:31?PM SMILEY kz4zk via <kz4zk=[email protected]> wrote:
?
I am unable to get vara fm to work using an Alinco DR-B185 and a Signalink. The system works fine sending and receiving winlink packet. I think I have tried every setting available. Computer is a Dell Latitude 6410.
?
Any ideas......
?
Smiley
Ellijay, Ga.

Join [email protected] to automatically receive all group messages.