I¡¯ve never seen any available for sale. ?I make do with Stanley 160mm coping saw blades, cutting/snapping approximately 4cm off one end and pressing out the retaining pin from the other end. ?They are not as stiff as the proper ones should be, but they work well enough.
15TPI blades are Stanley part number 0-15-061. ?Probably other similar makes are just as good.
toggle quoted message
Show quoted text
On 18 Sep 2024, at 16:15, John Rausch <jjrausch@...> wrote:
?
I can't offer you a source, but here is the only blade I have for my jigsaw.
It is 2mm from the teeth to the back of the blade and 0.8mm thick.
<P1090580.JPG>
