If UI is set for Kiss then the radio must be set for kiss mode as well, Unfortunately UI does not have a specific set up for the TH-d74 in KISS mode so your best bet is to use the D700 setup rather than the TNC2 and see if that works, if it does not you will have to modify the commands in the D700.cmd file (found in the cmd directory) to suit what the D74 needs.
73
Jeff G8HUL
toggle quoted message
Show quoted text
-----Original Message-----
From:
[email protected] <
[email protected]> On Behalf Of kk6cqx@...
Sent: 23 December 2021 18:36
To:
[email protected]Subject: [UI-View] Kenwood TH-D74 via Bluetooth
Trying unsuccessfully to connect my Kenwood TH-D74 via Bluetooth to UI-View on a windows machine.
The radio is connected via bluetooth to the laptop. I can use other applications fine In UI-View I am configured as follows BaudRate 9600 Parity None Com Port 5 (confirmed) Data Bit 8 Stop Bit 1 Host Mode Kiss
Setup of HostMode I am using TNC2
- This is where I'm unsure of what to do.
My callsign is configured. I'm just not seeing any other data coming into UI-View
