Keyboard Shortcuts
Likes
Search
Windows 10 igate software to TT4
开云体育I use?APRSISCE on my iGate.
73
Don W
KD4APP
From: [email protected] <[email protected]> on behalf of howardmsmall via groups.io <howard@...>
Sent: Friday, August 26, 2022 6:34:37 AM To: [email protected] <[email protected]> Subject: [TinyTrak] Windows 10 igate software to TT4 ?
I have a TT4 and would llike to set up an igate with it using Windows 10. I have found it a little confusing and welcome suggestions on a simple igate software package that will do the job.
Thanks, Howard, Vk4BS |
开云体育 - So you
don't need to go searching for it!
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 8/26/2022 1:11 PM, Don Woodward
wrote:
|
|
Thanks for the replies. I have that set up and running but do have a question. At the moment I am receiving infrom from the internet OK and I have all the settings correct (based upon posts in this group). I do not have a radio connected as yet but I do have the software set to transmit. I expected to see the packets from the internet then transmitted on RF (knowing that would not actually happen) according to the TT4 led indicators but there is no indication the TT4 is trying to transmit. Presumably it does not matter that there is not a connection to a transceiver?
|
开云体育The only packets that APRSIS32 will
forward from -IS to RF by default is messages addressed to
stations that have been heard on the RF port within the past 30
minutes and within 2 hops.? Gating arbitrary packets from -IS to
RF is an advanced configuration that requires the development
version (see Wiki for details), some very careful consideration
about what you are trying to accomplish, and very custom,
non-persistent, configuration. ? You might want to take this
discussion to the aprsisce group for more detail.
But when you get to needing to tune the
receive (RXAMP) on the TinyTrak4, you'd be better off asking that
here.
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 8/26/2022 4:19 PM, howardmsmall
wrote:
Thanks for the replies. I have that set up and running but do have a question. At the moment I am receiving infrom from the internet OK and I have all the settings correct (based upon posts in this group). I do not have a radio connected as yet but I do have the software set to transmit. I expected to see the packets from the internet then transmitted on RF (knowing that would not actually happen) according to the TT4 led indicators but there is no indication the TT4 is trying to transmit. Presumably it does not matter that there is not a connection to a transceiver?
|
开云体育Thanks Lynn – understood. I am living in an area where there are no digipeaters or iGates so thought I would try setting up an RF<->IS iGate to get some coverage in this area. I will drop that idea but look at setting up a plain digipeater. ? Regards ? Howard, VK4BS ? From: [email protected] <[email protected]> On Behalf Of Lynn Deffenbaugh
Sent: Saturday, 27 August 2022 21:39 To: [email protected] Subject: Re: [TinyTrak] Windows 10 igate software to TT4 ? The only packets that APRSIS32 will forward from -IS to RF by default is messages addressed to stations that have been heard on the RF port within the past 30 minutes and within 2 hops.? Gating arbitrary packets from -IS to RF is an advanced configuration that requires the development version (see Wiki for details), some very careful consideration about what you are trying to accomplish, and very custom, non-persistent, configuration. ? You might want to take this discussion to the aprsisce group for more detail. ? But when you get to needing to tune the receive (RXAMP) on the TinyTrak4, you'd be better off asking that here. ? Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32 ? ? On 8/26/2022 4:19 PM, howardmsmall wrote:
? |
开云体育A good message-gating IGate is good.?
It's when you want to gate "other" packets from the APRS-IS to RF
that it can get quickly out of hand.
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32 On 8/27/2022 1:48 PM, howardmsmall
wrote:
|
|
Looking at the area in which Howard resides, I don't think he is going to cause much trouble to anyone with an I-gate of either flavor, and/or a digipeater. He lives in a lonely APRS world!
73,
Allen AF6OF -----Original Message-----
From: Lynn Deffenbaugh <kj4erj@...> To: [email protected] Sent: Sat, Aug 27, 2022 5:28 pm Subject: Re: [TinyTrak] Windows 10 igate software to TT4 A good message-gating IGate is good.?
It's when you want to gate "other" packets from the APRS-IS to RF
that it can get quickly out of hand.
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32 On 8/27/2022 1:48 PM, howardmsmall
wrote:
Thanks
Lynn – understood. I am living in an area where there are no
digipeaters or iGates so thought I would try setting up an
RF<->IS iGate to get some coverage in this area. I
will drop that idea but look at setting up a plain
digipeater.
?
Regards
?
Howard,
VK4BS
?
From: [email protected]
<[email protected]> On Behalf Of Lynn
Deffenbaugh
Sent: Saturday, 27 August 2022 21:39 To: [email protected] Subject: Re: [TinyTrak] Windows 10 igate software to TT4 ?
The only packets that APRSIS32 will
forward from -IS to RF by default is messages addressed to
stations that have been heard on the RF port within the past
30 minutes and within 2 hops.? Gating arbitrary packets from
-IS to RF is an advanced configuration that requires the
development version (see Wiki for details), some very
careful consideration about what you are trying to
accomplish, and very custom, non-persistent, configuration.
? You might want to take this discussion to the aprsisce
group for more detail.
?
But when you get to needing to tune the
receive (RXAMP) on the TinyTrak4, you'd be better off asking
that here.
?
Lynn (D) -
KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
?
?
On 8/26/2022 4:19 PM, howardmsmall wrote:
?
|
开云体育Hamwise, very lonely ? and to make it even worse, I am in a bit of an RF hole… ? From: [email protected] <[email protected]> On Behalf Of vhsproducts via groups.io
Sent: Sunday, 28 August 2022 10:58 To: kj4erj@...; [email protected] Subject: Re: [TinyTrak] Windows 10 igate software to TT4 ? Looking at the area in which Howard resides, I don't think he is going to cause much trouble to anyone with an I-gate of either flavor, and/or a digipeater. He lives in a lonely APRS world! ? 73, ? Allen AF6OF -----Original Message----- A good message-gating IGate is good.? It's when you want to gate "other" packets from the APRS-IS to RF that it can get quickly out of hand.
? ? On 8/27/2022 1:48 PM, howardmsmall wrote: Thanks Lynn – understood. I am living in an area where there are no digipeaters or iGates so thought I would try setting up an RF<->IS iGate to get some coverage in this area. I will drop that idea but look at setting up a plain digipeater. ? Regards ? Howard, VK4BS ? From: [email protected] <[email protected]> On Behalf Of Lynn Deffenbaugh ? The only packets that APRSIS32 will forward from -IS to RF by default is messages addressed to stations that have been heard on the RF port within the past 30 minutes and within 2 hops.? Gating arbitrary packets from -IS to RF is an advanced configuration that requires the development version (see Wiki for details), some very careful consideration about what you are trying to accomplish, and very custom, non-persistent, configuration. ? You might want to take this discussion to the aprsisce group for more detail. ? But when you get to needing to tune the receive (RXAMP) on the TinyTrak4, you'd be better off asking that here. ? Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32 ? ? On 8/26/2022 4:19 PM, howardmsmall wrote:
? ? |
|
On Fri, Aug 26, 2022 at 09:37 AM, howardmsmall wrote:
I have a TT4 and would llike to set up an igate with it using Windows 10. I have found it a little confusing and welcome suggestions on a simple igate software package that will do the job. I've been researching setting up a recieve-only iGate at a local repeater site and If you want the serial port (as I did) be careful that you don't get the wrong one. |