Re: Windows 10 igate software to TT4
|
Thanks Lynn ¨C understood. I am living in an area where there are no digipeaters or iGates so thought I would try setting up an RF<->IS iGate to get some coverage in this area. I will drop that idea but look at setting up a plain digipeater. ? Regards ? Howard, VK4BS ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Lynn Deffenbaugh
Sent: Saturday, 27 August 2022 21:39
To: [email protected]
Subject: Re: [TinyTrak] Windows 10 igate software to TT4? The only packets that APRSIS32 will forward from -IS to RF by default is messages addressed to stations that have been heard on the RF port within the past 30 minutes and within 2 hops.? Gating arbitrary packets from -IS to RF is an advanced configuration that requires the development version (see Wiki for details), some very careful consideration about what you are trying to accomplish, and very custom, non-persistent, configuration. ? You might want to take this discussion to the aprsisce group for more detail. But when you get to needing to tune the receive (RXAMP) on the TinyTrak4, you'd be better off asking that here. Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 8/26/2022 4:19 PM, howardmsmall wrote: Thanks for the replies. I have that set up and running but do have a question. At the moment I am receiving infrom from the internet OK and I have all the settings correct (based upon posts in this group). I do not have a radio connected as yet but I do have the software set to transmit. I expected to see the packets from the internet then transmitted on RF (knowing that would not actually happen) according to the TT4 led indicators but there is no indication the TT4 is trying to transmit. Presumably it does not matter that there is not a connection to a transceiver?
?
|
